Bedienungsanleitung Denon DN-SC3900 (Seite 26 von 56) (Englisch)

614624

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Getting started Preparations Connection MIDI Control Troubleshooting Speciﬁcations Index

Others Settings

Playback

Preparation for playback

Preparing for playback from a network

connected device

•When this unit is connected via a network, tracks can be shared

between multiple DN-SC3900 units, and tracks stored on the

computer can also be shared. This section explains how to prepare

for playback of tracks from devices connected via the network.

•For details on the ﬁle formats that can be played on this unit, see

page 5.

n Sharing tracks between multiple DN-SC3900

units

Connect 2 or more DN-SC3900 units to the network

(vpage 15).

•A maximum of four DN-SC3900 units can be connected to the

network.

•Before starting, use “Utility” – “Preset Setting” – “Network ID”

(vpage42) to set the different network ID for each unit.

Press LINK.

The “Network ID” list of all units connected to USB memory

devices and HDDs are shown in the display.

Select the “Network ID” of the unit connected to the

USB memory device or HDD that contains the track

you want to play back.

Turn SEL. to select “TITLE”.

Press SEL.

Titles of the tracks that are registered to the database are

shown in the display.

Turn SEL. to select the track you want to play.

•Youcanalsosearchfortracksbycategory(vpage21).

Press SEL.

The cue standby mode is set at the start of the selected tracks.

•FAT16/FAT32 and HFS+ (read only) formats are supportedfor the

USB memory device and HDD.

•When using a USB HDD of the kind to which an AC adapter can be

connected to supply power, use the AC adapter.

•If the USBmemory device is not recognized, disconnect theUSB

memory device and then reconnect it.

•When there are 2,048 or more subfolders in a folder or when there

are 1,024 or more music ﬁles saved in a folder, the exceeded

subfolders or ﬁles cannot be displayed. (Not including folders and

ﬁles under the displayed folder)

NOTE

•Depending on the type of mass-storage USB memory device

or portable music player, it may take some time for this unit to

recognizethedevice.

•Do not connect devices or cables that do not conform to USB

standards.

•USB memory devices will not work via a USB hub.

•WhenHFS+isused,thisunitmaynotbeabletorecognizethele

name if characters other than ISO8859-1 registered characters or

character codes other than Japanese are used.

•HDDs up to 2 TB in size can be formatted using this unit. Larger

HDDs are not supported.

•NTFS format USB memory devices and HDDs are not supported. If

used, this unit may malfunction.

•WhenusingaHDDthathasanautomaticpowerON/OFFfunction

that switches the HDD power on and off in sync with the computer,

disable this function in the settings.

n Removing the USB memory device or HDD

Press and hold USB 5.

When the USB DRIVE indicator turns off, disconnect

the USB memory device or HDD from the USB port.

NOTE

•Be sure the USB memory device or HDD is paused before removing.

•When removing USB memory device or HDD, use the above

procedure to turn off the USB DRIVE indicator before removing.

Incorrectly removing the USB memory device or HDD may damage

the data stored on the device.

•DENON cannot accept any responsibility whatsoever for the damage

or loss of data from USB memory devices or HDDs that are used in

conjunction with this device.

•There is no guarantee that this unit is compatible with all types of

USB memory devices or HDDs.

n Sharing tracks between this unit and a

computer

When this unit is connected to a computer, check that the following

application is installed on the computer.

•Music management software “engine” (vpage13)

Connect this unit to the computer (vpage 15).

•Only one computer can be connected to this unit.

Start “engine” on the computer.

An icon representing the unit connected to the network is

shown in the “engine” screen.

Press LINK.

The “Network ID” list of all units connected to USB memory

devices and “engine” is shown in the display.

Select “engine” from the “Network ID” list.

Turn SEL. to select the track you want to play.

Press SEL.

The cue standby mode is set at the start of the selected tracks.

•For details of how to operate “engine”, see mengine Instruction

manual.

See the illustration on the previous page for details of the buttons used for the

operations on this page.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DN-SC3900 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon DN-SC3900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info