Bedienungsanleitung Denon DN-SC3900 (Seite 30 von 56) (Englisch)

614624

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Getting started Preparations Connection MIDI Control Troubleshooting Speciﬁcations Index

Others Settings

Playback

n Using the vinyl disc for fast forward/rewind

Press VINYL.

VINYLmodeswitchesoff,andVINYL goes out.

Press 13 during playback.

13 ﬂashes, and the track is paused.

Turn the vinyl disc to nd the playback point.

The playback point moves 1 frame at a time.

Press 13.

Playback resumes from the next playback point.

Setting the cue point

By setting a cue point, the track can be played back from the set

position.

n Setting the cue point mode

The operating procedures for setting the cue point differs

depending on the mode. Select the desired operating procedure

along with the mode.

Switch the cue point setting mode in “UTILITY” –

“Preset Setting” – “Cue Mode” (vpage 43).

Standard

Sets the cue point by the standard method used in

general DJ products.

DENON

Sets the cue point in the same way as conventional

DENON DJ products.

•The default setting is “Standard”.

n Setting the cue point

n When using “Standard” mode

Pause the track in the position where you want to set

the cue point, and press CUE.

The cue point is set at the paused position.

n When using “DENON” mode

Pause the track in the position where you want to set

the cue point, and start playback.

The cue point is set at the paused position.

•Irrespective of the mode, the cue point is set at the start of the

track when the track is loaded.

n Returning to the cue point

•Playback stops, returns to the position where you want to playback

again (cue point), and is paused (back cue function).

•When this function is used, playback can always be started from

the same position.

During playback, press CUE.

Playback stops, cues to the playback start position (cue point), and

pauses.

Operations during playback

n Moving the cue point

There are two methods for moving the cue point, using 6 7

buttons, or using the vinyl disc.

Setting with 6 7 buttons

When playback is paused, press 6 7 and move

the cue point to the position where you want to set it.

The cue point moves 1 frame each time the button is pressed.

n When using “Standard” mode

Press CUE.

The cue point is set at the moved position.

n When using “DENON” mode

Press 13.

The cue point is set at the moved position, and playback

starts.

Setting with the vinyl disc

Press VINYL.

VINYL lights orange.

Turn the vinyl disc while playback is paused to move

the cue point to the position where you want to set it.

•Youcansearchforthecuepointbylisteningtotheplaybacksound

in 1 frame units.

n When using “Standard” mode

Press CUE.

The cue point is set at the moved position.

n When using “DENON” mode

Press 13.

The cue point is set at the moved position, and playback

starts.

See the illustration on the previous page for details of the buttons used for the

operations on this page.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DN-SC3900 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon DN-SC3900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info