Bedienungsanleitung Denon DN-X1100 (Seite 7 von 14) (Englisch)

614629

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite



Connections Fader Start

ENGLISH

Speciﬁcations

Q5 CROSSFADER CONTOUR control

Allows adjusting the “shape” of the Crossfader

response from a gentle curve for smooth, long

running fades, to the steep pitch required for top

performance cut and scratch effects.

Q6 CH FADER CONTOUR control

Adjusts the volume curve response of the

channel fader.

Q7 CH FADER START switch

This function will start the performance of CD

player with Ch. Fader automatically is on/off.

FADER START

If the separately sold DN-S1200, DN-S3500,

DN-HS5500 and etc. players are connected to

LINE2, 4, 6 or 8, they can be started using the

source input fader (Ch. Fader) or Crossfader, as

long as the 3.5 mm stereo mini cords have been

connected.

Q8 MASTER BALANCE control

Adjusts the L/R balance of the MASTER output.

Q9 EFFECTS ON/OFF button

• Routes the assigned signal through the external

processor attached to the SEND/RETURN

connectors on the rear.

• When the EFFECT is ON, the button is lit.

• The effect button is ﬂashing when there is no

connection of the effects.

W0 EFFECTS WET/DRY control

Use this to adjust the ratio of original and

effected sound.

W1 PRE/POST switch (EFFECTS)

Use this to select pre-fader or post-fader.

W2 EFFECTS ASSIGN switch

Use this to select the source of the external

processor.

W3 CUE buttons

Pressing in any or all of CUE buttons routes the

respective source to the headphone and meter

cue sections. Pressing multiple buttons makes

it possible to derive mixed sound from the

selected sources.

W4 BOOTH LEVEL control

Adjusts the level of the BOOTH outputs.

W5 BOOTH ASSIGN switch

Selects the source of the BOOTH output.

W6 POWER switch

Press the switch to turn the power on.

W7 Peak dB CUE/PROGRAM meter

• Displays the output level following Master Level

adjustment, the peak level is held for 1 second.

Display range: –24 dB to +12 dB.

• Can switch between two display modes. See

below u, i.

W8 MASTER LEVEL control

Adjusts the level of the MASTER outputs.

W9 POWER indicator

When the red indicator is lit, the DN-X1100 is

ready to go.

E0 Source EQ controls

Use VRs with center detent for equaliser.

Adjusts the high-tone sound –33 dB to +10 dB.

At the center position, sound is ﬂat.

MID

Adjusts the mid-tone sound –35 dB to +10 dB.

At the center position, sound is ﬂat.

LOW

Adjusts the low-tone sound –35 dB to +6 dB. At

the center position, sound is ﬂat.

E1 LEVEL controls

Adjusts the level of the selected input – ∞ to

+15 dB.

E2 SOURCE INPUT SELECT switches

(Input selectors)

• Select any source from eight inputs (PHONO1/

LINE1, LINE2, PHONO2/LINE3, LINE4, PHONO3/

LINE5, LINE6, LINE7, LINE8) for each channel

independently.

• You also can assign the same input to several

channels for creative mixing.

E3 CH LEVEL meter

Display range: –24 dB to +12 dB.

Displays the input level after adjusted with

LEVEL E1 and Source EQ E0 controls.

Getting Started

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DN-X1100 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info