Bedienungsanleitung Denon DN-X1600 (Seite 27 von 32) (Englisch)

614617

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Getting Started Connections Basic Operations Speciﬁ cations Troubleshooting

Effector Function Fader Start UtilityUSB

Utility

ENGLISH

Category Item Parameter Value Default Settings Setting Details

1 Audio Setting

1 Master Setting 1 MONO ON / OFF OFF When set to ON, the Master output is monaural.

2 Mic Setting

1 Ducking Level -20dB to -40dB -30dB Adjusts the amount of attenuation for the audio level when ducking is operating.

2 Ducking Response Fast or Normal Normal Adjusts the ducking response.

3 Mic EQ

1 Hi 1kHz to 4kHz 2kHz

Sets the Mic EQ cut off frequency.

2 Low 500Hz to 2kHz 1kHz

3 Default -

4 Mic to Booth/Rec ON / OFF OFF When set to ON, the Mic sound is output from Booth and Rec.

3 Isolator EQ

1 X.Over Hi 1kHz to 8kHz 2kHz

Sets the boundary lines for the frequencies that control Hi, Mid, and Low in the channel

equalizer.

2 X.Over Low 100Hz to 800Hz 360Hz

3 Default -

4 Cue Setting 1 Cue Mode *1 Mix / Solo Mix When set to Solo, audio from only one channel can be continually cued.

5 Head Phones EQ

1 EQ Hi -15dB to +15dB 0dB

Adjusts the equalizer settings for the headphones. 2 EQ Low -15dB to +15dB 0dB

3 Default -

6 EFX Send/Rtn 1 Unity Level Select -10dBV / 0dBV -10dBV Selects the signal level for the Effect Rtn with connected device.

7 USB Audio Setting

1 USB Assign Ch / Master Ch Selects whether to assign a channel to the USB audio input, or to add a Master/Cue bus.

2 OutputSourceSelect

1 USB1 / USB2

Non,CH1,CH2,CH3,CH4,Master,Re

c,Mic

Master

Selects the source output with the USB audio.

2 USB3 / USB4 Mic

3 USB5 / USB6 CH2

4 USB7 / USB8 CH3

3 Preset Input Select

1 CH1

USB1/USB2,USB3/USB4,

USB5/USB6,USB7/USB8,DVS

DVS Selects the source input with P1–P4.

2 CH2

3 CH3

4 CH4

4 Output Level VR -20dB to +20dB 0dB Selects the USB audio output level.

5 CH Input Level VR -20dB to +20dB -6dB Selects the level when USB audio is input into Channel 1–4.

6 Mas Input Level VR -20dB to +20dB -6dB Selects the level when USB audio is input into Master.

7 Cue Input Level VR -20dB to +20dB -6dB Selects the level when USB audio is input into Cue.

8 Digital Out Setting 1 Digital Output VR -20dB to +20dB 0dB Selects the output level for the Digital Out terminal.

9 X-Fader Setting

1 A Side Cut Position *2 -2.0mm to +8.0mm 0.0mm Adjusts the rise position for the A side cross fader.

2 B Side Cut Position *2 -2.0mm to +8.0mm 0.0mm Adjusts the rise position for the B side cross fader.

10 Beat Breaker Setting 1 to 5 1 Edits the custom pattern for the BeatBreaker.

2 System Setting

1 Sampling Frequency 44.1kHz / 48kHz / 96kHz 96kHz Selects the internal sampling rate for the unit.

2 PC/MAC*3 PC Mode / MAC Mode PC Mode Selects the type of connected computer when in device mode.

3 Version XXXX - Displays the version number.

3 MIDI Setting

1 MIDI INPUT CH 1 to 16, OMNI 1 Selects the USB MIDI INPUT CH.

2 MIDI OUTPUT CH 1 to 16 1 Selects the MIDI OUTPUT CH.

3 MIDI Output Enable

1 5Pin ON / OFF ON

Selects whether or not to output from MIDI.

2 USB ON / OFF ON

4 MIDI CLK

1 5Pin ON / OFF ON

Selects whether or not to output from MIDI CLOCK.

2 USB ON / OFF ON

5 MIDI Page 1 to 4 1 Selects the MIDI page for when the power is switched on.

6 V-LINK

1 Model V-4 / V-8 V-4 Selects the model connected to V-LINK.

2 Device ID 0x00 to 0x1F 0x10 Selects the Device ID for the device connected to V-LINK.

3 Trigger Level -40dBFS to 0dBFS -30dBFS Selects the level of trigger that switches the image effects when Ping Pong Delay is used.

4 Cross Fader Contour ON/OFF OFF Selects whether to reﬂ ect the crossfader curve on V-LINK.

5 Cross Fader

Enable / Disable Enable Selects whether or not to use each control with V-LINK.

6 Beat

7 Parameter

8 DRY/WET

9 EFX Button

10 FUNC1/FUNC2

4 Other Setting

1 Preset Export Exit / Execute*4 Exit Writes the Presets to the USB memory.

2 DN-X1600 Initialize Exit / Execute*5 Exit Returns settings to the factory settings. (Excluding the Owner Setting items)

5 Owner Setting Display only Displays the details of the Owner Settings.

*1 When SOLO is selected as the CUE mode setting, only one of the two CUE buttons, whichever was pressed last, becomes operational.

*2 The cut-off position of the Crossfader can be adjusted separately for each side.

*3 When the unit is connected to a computer which runs Windows XP, Vista or a similar operating system, select the PC Mode.

When it is connected to a computer which runs Mac OSX or a similar operating system, select the MAC Mode.

*4 The settings for these Preset and the Owner mode settings can be stored on an external USB memory or other memory device.

*5 The settings for these Preset are set to the factory settings.

Preset Items and Data

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DN-X1600 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon DN-X1600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info