Bedienungsanleitung Denon DN-X1700 (Seite 12 von 26) (Englisch)

614628

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Getting Started Connections Basic Operations Speciﬁ cations TroubleshootingEffector Function Fader Start UtilityUSB

Preparations

Set the POWER switch to ON.

Use the SOURCE SELECT controls to select the sources

(LN1–LN4, D1–D4, USB) of channels 1 to 4 which are

to be used.

Use the CD/PHONO line input selector buttons of the

lines to set the CD or PHONO as the line input.

Check the level meter, and adjust the input levels using

the channel input level controls (LEVEL controls).

Adjust the sound quality using the HI, MID, LOW

channel isolator EQ controls.

Determine where the channel signals are to be

assigned using the CROSSFADER ASSIGN switches

(A/THRU/B).

Set these switches to the THRU position if the

Crossfader is not going to be used.

Adjust the volume level using the Channel Fader and

Crossfader.

Adjust the output level using the MASTER LEVEL

control.

MIC (mic input)

When using a microphone, press the MIC1 or MIC2

button to set it to ON.

Adjust the MIC1 volume level using the MIC1 TRIM

control, and adjust the MIC2 volume level using the

MIC2 TRIM control.

While inputting the audio signals to the unit, monitor

the LEDs on the SIG/PK (signal/peak) meter. If

the LEDs occasionally light up red but there is no

distortion and the LEDs then light up amber, the

suitable level has been reached as a result of the

adjustment process.

Adjust the sound quality using the MIC EQ controls

(HI/LOW).

When the DUCKING ON/OFF button is set to ON, all

outputs except the mic sound will be attenuated when

the signals from the microphone are supplied.

To add the effect functions to the mic input, set the

Mic EFX INS buttons to ON.

MONITOR (headphones output)

Select the source to be monitored using the CUE

buttons of the channels. When a source is selected, the

LED in the CUE button lights.

CUE monitoring for channels 1 to 4 as well as EFX 1

and EFX 2 can be selected.

Selecting the STEREO or SPLIT CUE mode.

Use the

SPLIT CUE button to select the STEREO or

SPLIT CUE mode. When the mode is selected, the

LED in the SPLIT CUE button lights.

In the SPLIT CUE (monaural) mode, the signals

selected for cue are output to the left channel speaker

of the headphones, and the master signals are output

to the right channel speaker.

In the STEREO mode, the master signals and signals

selected for cue are output in stereo.

Use the headphones PAN control to adjust the balance

between the cue signals and master output signals.

When it is turned counterclockwise, only the cue

signals are output from the headphones; conversely,

when it is turned clockwise, only the master output

signals are output.

Use the HEADPHONES LEVEL control to adjust the

headphones output to the desired level.

Basic Operations

Ducking function

This function detects the mic input and attenuates the level of the

music signals in the master output. It prevents the sound from

the microphone from being drowned out by the music when a

microphone is used.

To enable the ducking function, set the DUCKING ON/

OFF button to ON. The LED in the button will light.

The attenuation level of the master output while the

ducking function is operating can be set within a

range from –30 dB +/–10 dB in the Utility mode.

Basic Operations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DN-X1700 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon DN-X1700

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info