Bedienungsanleitung Denon DN-X600 (Seite 9 von 28) (Englisch)

614631

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Before use

Part names and

Functions

Connections

Basic

operations

Effector

function

Fader

Start function

USB settings

Troubleshooting

IndeX

speciﬁcations

System diagram

Main features

1. Wide range of input and output terminals

The input and output terminals available on this unit are described

below.

Input

• CD 2

• PHONO 2

• Mic 1

• AUX1 1

• AUX2 1 /Effect 1 (combined use)

Output

• Master 2

• Booth 1 /Effect 1 (combined use)

Input/Output

• USB Audio Interface

Additionally, this unit is a 96kHz/32 bit DAC supported DJ full digital

mixer equipped with USB MIDI and terminal output MIDI interface.

2. Designed to achieve high sound quality

• The unit features a 96 kHz/32-bit ﬂoating digital signal processor

(DSP) and 32-bit digital-to-analog converter (DAC) (master output).

The unit delivers high quality sound that is faithful to the original

sound source.

• An electrolytic capacitor designed to enhance sound quality is

employed in the power supply unit. Additionally, ﬁlm capacitors that

are designed to enhance sound quality and high-precision metal

ﬁlm resistors are used to conﬁgure the audio signal processing

unit, resulting in superb quality sound.

• The unit is equipped with a microphone ampliﬁer that features a

discrete transistor conﬁguration and low equivalent input noise of

126 dB, and a PHONO ampliﬁer that features a signal to noise ratio

of 89 dB.

3. Multiple Effects

Speciﬁc parameters for each of the 8 different effects can be linked

to the beats per minute (BPM) of every track passing through the

mixer. The effects processor offers its own set of controls such as,

Dry/Wet mix, Parameter Low/High pass ﬁlter, Cross Over ﬁlter, Beat

time adjustments, TAP, Manual and Auto BPM, Pre Efx Cueing and

ON/OFF.

4. USB audio and MIDI interfaces

• 8-channel (4 stereo channels) 96 kHz USB audio input/output

function

• DVS (Digital Vinyl System) compatible.

• Most of the panel operations can output MIDI.

• The MIDI clock signal is detected from the computer, and can be

automatically used as a BPM value.

• The unit incorporates an effect send/return function that allows

effects to be applied to audio output from this unit using effector

software on a computer, and then to re-input the audio into the

unit.

• A low latency ASIO driver is also included with the unit.

5. High-reliability design for professional use

• Isolator ﬁlters are incorporated for each input channel.

• Crossfader slide torque can be adjusted to personal preferences.

• Matrix source selectors enable the selection of any of 6 input

sources

6. Others

• Ducking function reduces the amount of background sound during

mic usage.

• Channel Fader and Crossfader start function

• Auto Standby function (Eco mode)

Cautions on handling

• Before turning the power switch on

Check once again that all connections are correct and that there are

no problems with the connection cables.

• Power is supplied to some of the circuitry even when the unit is

set to the standby mode. When going on vacation or leaving home

for long periods of time, be sure to unplug the power cord from the

power outlet.

• About Condensation

If there is a major difference in temperature between the inside of

the unit and the surroundings, condensation (dew) may form on

the operating parts inside the unit, causing the unit not to operate

properly.

If this happens, let the unit sit for an hour or two with the power

turned off and wait until there is little difference in temperature

before using the unit.

• Cautions on using mobile phones

Using a mobile phone near this unit may result in noise. If that

occurs, move the mobile phone away from this unit when it is in use.

• Moving the unit

Turn off the power and unplug the power cord from the power

outlet. Next, disconnect the connection cables to other system units

before moving the unit.

• About Care

• Wipe the cabinet and control panel clean with a soft cloth.

• Follow the instructions when using a chemical cleaner.

• Benzene, paint thinner or other organic solvents as well as

insecticide may cause material changes and discoloration if brought

into contact with the unit, and should therefore not be used.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DN-X600 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon DN-X600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info