498792
34
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
28
ENGliSh
Add New Feature
•In order to add new functions, the environment and settings required
for connecting to broadband internet are needed (vpage6).
•Perform the add new feature operation after at least 2 minutes has
elapsed since turning this unit’s power on.
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display (vpage20 “Menu map”).
2
Use ui to select “Other” – “Add New Feature”,
then press [ENTER], <1/3
ENTER
> or p.
Start Upgrade
Execute the upgrade process.
•If the upgrade is not successful, an error message identical to those
in “Firmware Update”(vpage 28) will appear on the display.
Check the settings and network environment, then update again.
Upgrade Status
Display a list of the additional functions provided
by the upgrade.
Upgrade ID
The ID number shown on this screen is needed
when carrying out the procedure.
See the DENON website for details about updates.
When the procedure is complete, “Registered” is displayed and
updates can be carried out. If the procedure has not been carried
out, “Not Registered” is displayed.
[Notes concerning use of “Firmware Update” and
“Add New Feature”]
•Do not turn off the power until updating or upgrating is completed.
•Even with a broadband connection to the Internet, approximately
20 minutes is required for the updating/upgrading procedure to be
completed.
•Once updating/upgrade starts, normal operations on this unit cannot
be performed until updating/upgrading is completed.
•Furthermore, updating/upgrading the fi rmware may reset the backup
data for the parameters, etc. set for this unit.
•If the update or upgrade fails, remove and re-insert the power cord.
“UPDATE RETRY” appears on the display and update restarts from
the point at which update failed. If the error continues despite this,
check the network environment.
Setting the others [Other]
Firmware Update
•In order to update the fi rmware, the environment and settings
required for connecting to broadband internet are needed
(vpage6).
•Perform the fi rmware update operation after at least 2 minutes has
elapsed since turning this unit’s power ON.
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display (vpage20 “Menu map”).
2
Use ui to select “Other” – “Firmware Update”,
then press [ENTER], <1/3
ENTER
> or p.
Check for Update
Check for fi rmware updates. You can also check
approximately how long it will take to complete
an update.
Start
Execute the update process.
•If updating fails, the set automatically retries, but if updating is still
not possible, one of the messages shown below is displayed. If
the display reads as shown below, check the settings and network
environment, then update again.
Display Description
Updating fail Updating failed.
Login failed Failure to log into server.
Server is busy Server is busy. Wait a while then try again.
Connection fail Failure in connecting to server.
Download fail Downloading of the fi rmware has failed.
Button located on both the main unit and the remote control
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control
[BUTTON]
Symbols used to indicate buttons in this manual
[ENTER]
[DISPLAY]
[SEARCH]
[TUNER]
[MENU]
ui p
ui
p
<1/3 ENTER>
1.DNP720AEE2_ENG_Final_0727.indd 28 2011/07/30 8:39:21
34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon DNP-720AE wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Denon DNP-720AE

Denon DNP-720AE Bedienungsanleitung - Deutsch - 52 seiten

Denon DNP-720AE Bedienungsanleitung - Holländisch - 52 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info