Bedienungsanleitung Denon dvd 1710 (Seite 13 von 28) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

136499

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

–

English

Connection to an audio system

Stereo system

NOTES (for Method 2 only):

• When using an AV amplifier with a built in decoder (AV control center), Dolby Digital, or DTS decoder as shown in the

Method 2, set “DOLBY DIGITAL” or “DTS” to “ON” accordingly for audio output in the setup mode (Refer to page 24). Set it

to “OFF” for the decoder that is not used currently. Playing a DVD using incorrect settings may generate noise distortion,

and may also damage the speakers.

• The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD

deck or DAT deck.

•

Set “DOLBY DIGITAL”

“DTS” to “OFF” for audio output in the setup mode for connecting to an MD deck or DAT deck. (

Refer

to page 24)

•

Harsh noise that could harm your ears or the speakers is generated when a DVD recorded in DTS is played while using a

decoder, etc., that is not DTS-compatible.

•

When playing a copyright-protected 96 KHz linear PCM DVD, the digital sound will be down sampled at 48 KHz, even if you

set “LPCM SELECT” to “OFF”.

AUDIO

DVD

Audio Input Jacks

Digital Audio Input

Jacks

Analog Audio Out

Digital Audio Out

• Method 1 DVD Player + Stereo system

• Method 2 DVD Player + AV amplifier with a built in decoder (AV control center), Dolby Digital decoder, DTS decoder,

MD deck or DAT deck

Method 1 Method 2

CONNECTIONS

The following show examples of connections commonly used to connect the DVD player to TV and other com-

ponents.

If using this DVD player to playback a DVD in a Dolby Digital 5.1 channel surround or DTS surround format, the

DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL OUT jacks. By

hooking the player up to a Dolby Digital or DTS decoder, you can enjoy more convincing, realistic ambience

with powerful and high-quality surround sound of a professional standard which can be heard in movie the-

aters. Use an audio optical or coaxial digital cable (not included) for the audio connections.

NOTES:

• Be sure to turn off the power to all components in the system before connecting another component.

• Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to

the DVD player.

Optical cable (not supplied)

• Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diame-

ter of 15 cm or more when storing them.

• Use a cable which is 3m or shorter.

• Insert cable plugs firmly into the connectors when making connections.

• If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector.

AV amplifier with a built in decoder

(AV control center),

Dolby Digital decoder,

DTS decoder,

MD deck or DAT deck

E5980_85UD(EN).qx3 04.4.23 6:27 PM Page 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon dvd 1710 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info