Bedienungsanleitung Denon DVD-1920 (Seite 17 von 240) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

8587

Zoom out

Zoom in

Vorherige Seite

1/240

Nächste Seite

–

English

DISC PLAYBACK

Getting started

• Turn on the power of the TV, amplifier and any other com-

ponents which are connected to the DVD player.

• Make sure the TV and audio receiver (commercially avail-

able) are set to the correct channel.

Press the POWER ON button.

• P-ON will appear briefly on the dis-

play panel.

Press the OPEN/CLOSE button

to open disc loading tray.

Place the disc on the tray, with

the label facing up.

Press the PLAY button.

• The tray will close automatically, then playback will start

from the first chapter or track of the disc. If the playback

does not start automatically, press the PLAY button.

• When you play back the DVD with a title menu, it may

appear on the screen. In this case, refer to “Title

Menu”.

Press the STOP button to stop playback.

NOTES:

• A “prohibited icon” may appear at the

top-right on the TV screen during opera-

tion, warning that a prohibited operation

has been encountered by the DVD play-

er or the disc.

• With DVDs that use some titles for playback pro-

gramme signals, playback may start from the second

title, or it may skip these titles.

• During the playback of two layered disc, pictures may

stop for a moment. This happens when the 1st layer

switches to the 2nd layer. This is not a malfunction.

• The operation may vary when you play back DVDs with

disc menu or Video CDs with PBC. Refer to the manual

accompanying the disc for details.

DivX

WMAJPEG

MP3CD

Super

Audio CD

VCDDVD-ADVD-V

Press the MENU button.

• The DVD main menu will appear.

If the feature is not available, symbol may

appear on the TV screen.

If disc menu is available on the disc, audio

language, subtitle options, chapters for the title and

other options will appear for selection.

Press the

Cursor buttons (K / L / s / B) to select an

item, and the ENTER button to confirm the selection.

DVD-V

Basic Playback

Disc Menu

DVD may contain menus to navigate the disc and access spe-

cial features. Press the appropriate Numeric buttons or use the

Cursor buttons (K / L / s / B) to highlight your selection in the

DVD main menu and press the ENTER button to confirm.

NOTE:

• Unless otherwise stated, all operations described are

based on remote control use. Some operations can be

carried out using the menu bar on the TV screen.

DVD-ADVD-V

General Features

Insert a Video CD.

Press the

STOP button.

Press the

Numeric buttons to enter the desired

Track number.

• PBC function is now cancelled and the playback of the

Video CD will start.

To call back PBC function, press the STOP button

twice, and then press the PLAY button.

• The title menu will appear on the display.

VCD

CANCELLING AND CALLING BACK PBC FUNCTION

Press the DIMMER button on the front panel to

select the desired brightness of the front panel dis-

play. (BRIGHT, DIMMER or OFF)

• The default setting is BRIGHT.

NOTES:

• The brightness of the front panel display can be adjust-

ed from the setup menu. Details are on page 31.

• When you turn on the power next time, the brightness

of the front panel display will be as set in setup menu.

Brightness of the Front Panel Display

HDMI Setup

Press the HDMI button on the front panel to select

the HDMI output mode.

The output mode changes as follows every time

the HDMI button is pressed.

• The HDMI indicator on the front panel lights up when

HDMI output mode is on.

OFF (Default):

No video outp

uts from the HDMI OUT connector.

480/576P: Video output from the HDMI OUT jack at 480/576p.

720P: Video output from the HDMI OUT jack at 720p.

1080: Video output from the HDMI OUT jack at 1080i.

NOTES:

• Video and audio signals may be distorted temporarily

when switching to/from the HDMI output mode.

Pure Direct Mode

Press the PURE DIRECT button on the front panel to

output an analog audio signal only (no analog video

and HDMI signals will be output and the display will be

turned off). The higher quality sound will be achieved.

NOTES:

• When the buttons below are pressed, the pure direct

mode will be released.

OPEN/CLOSE button (on both the remote and the front

panel), SETUP or DISPLAY button (on the remote),

ON/STANDBY or PURE DIRECT button (on the front panel).

• The PURE DIRECT button will not function while dis-

playing the setup menu.

• If you turn on the pure direct mode while selecting HDMI

mode, both video and audio signals will not be output.

•

Use a display equipment with an HDMI-compatible port.

•

Progressive video signal will not be output from the COM-

PONENT VIDEO OUT during the HDMI output mode.

•

The HDMI indicator on the front panel flashes when you

select the HDMI output mode but there is no HDMI cable.

• If you turn on the pure direct mode, both video and

audio signals through the HDMI output will be cut off

(press the

PURE DIRECT button again to recover).

• You can check the HDMI connection status by pressing

the DISPLAY button during playback with the HDMI

output mode (refer to page 25).

• If the TV is not compatible with newly selected HDMI

output mode, the actual output mode will be kept the

one before changing the selection. When this occurs,

the newly selected mode will appear on the front panel

display (see page 11) while the actual output resolution

will be indicated by performing the on-screen display as

described on pages 24-25.

• Actual output signals for each HDMI mode are differ

with the compatibility of the connected display device.

Refer to the table on page 11 for details of output pat-

terns of each HDMI mode.

1080720POFF 480/576P

E61E2/E3ED_EN.qx3 05.7.7 17:03 Page 17

Denon DVD-1920 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon DVD-1920

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info