Bedienungsanleitung Denon DVD-2500 (Seite 27 von 42) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

64120

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

ENGLISH

Playback Playback

ENGLISH

You can enjoy stereo phonic virtual space through your existing

2-channel stereo system.

1) In stop mode, press [MODE] repeatedly until the virtual

surround setting appears.

2) Use [U / V] to select “1” (Natural effect), “2” (Emphasised

effect) or “Off”.

3) Press [RETURN] to exit.

By selecting the pure direct mode, you can shut down the circuitry

of the front panel.

1) Press [PURE DIRECT] repeatedly to select your desired pure

direct mode.

• Each time you press [PURE DIRECT], the pure direct mode

changes as “Normal” A “Display Off” A “Normal”. The

modes will be displayed on the front panel display.

BD audio mode is to choose between two ways; you could output

the secondary and interactive audio accompanied by the primary

audio or you could output the primary audio only. Depending on

the setting of the mode, Dolby Digital, DTS, Dolby Digital Plus,

Dolby TrueHD, or DTS-HD output changes between multi LPCM

and bitstream.

1) In stop mode with BD inserted, press [MODE].

2) Use [U / V] to select desired setting.

BD Audio Mode

• The secondary audio is the audio for the sub picture

(Director's comment etc.) and the interactive audio is the

audio for the interactive application (Button click sounds

etc.).

3) Press [RETURN] to exit.

• You can also set the BD Audio Mode from the setup menu.

Refer to page 30.

Item Description

Adjustment range

(*:default)

Noise

Reduction

Reduces the noise of the

playback picture.

Off*

+1: Execute MPEG

noise reduction

witch reduce the

block noise and

mosquito noise on

the subtitle on

movie.

+2: Execute 3D noise

reduction witch

detect and delete

the noise by

comparing each

picture frames.

+3: Execute both

MPEG noise

reduction and 3D

noise reduction.

Note

• The setting remains even you turn off the unit.

• You cannot adjust the setting during the dialog speed

playback.

• For BD, noise reduction is not effective.

Virtual Surround

Note

• Select virtual surround “Off” or lower the volume if the

sound is distorted.

• This function cannot be used during dialog speed (refer to

page 15).

• For the virtual surround, audio signal will always be

2-channel LPCM.

Pure Direct Mode

“Normal” : Pure direct mode is off.

[PURE DIRECT]

“Display Off” : Front panel display will be turned off.

Note

• The “Display Off” mode goes back to “Normal” mode if you

turn off this unit.

DVD-VR

BD-V

DVD-V

Off

Setting the BD Audio Mode

“Mix Audio Output” : The Dolby Digital, DTS, Dolby

Digital Plus, Dolby TrueHD or

DTS-HD format will be converted to

Multi LPCM. If it is available,

secondary and interactive audio it

will be output with primary audio.

“HD Audio Output” : Dolby Digital, DTS, Dolby Digital

Plus, Dolby TrueHD, or DTS-HD will

be output in a full stream. Please

refer to page 11 for output audio

signals. In this mode secondary or

interactive audio will not be output.

BD-V

E5J01_03_05ED_EN.book Page 22 Tuesday, November 11, 2008 11:38 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DVD-2500 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon DVD-2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info