138811
24
Zoom out
Zoom in
Vorherige Seite
1/109
Nächste Seite
24
ENGLISH
11
ADJUSTING THE PICTURE QUALITY
ENTER
TOP MENU
DISPLAY
MARKERRANDOM
PAGE
A-B
ZOOM
DIMMER
REPEAT
SETUP
SKIP
SLOW / SEARCH
ANGLE SUBTITLE AUDIO SEARCH MODE
PLAY
STILL /
PAUSE
STOP
PIC.ADJ
0 +10
P.D.MEMORY
MENU
1
2, 3, 4, 5, 7, 8
2, 6, 9
3
Use the 0 and 1 cursor buttons to select the
picture memory, then press the ENTER button.
The display switches as follows:
STD (STANDARD) ´ M1 (MEMORY 1) ´ M2
´ M3 ´ M4 ´ M5
STD (Factory default)
When this is selected, both the picture quality
and function are reset to normal.
M1 to M5
Picture quality settings you have adjusted can
be stored here.
2
P I C TURE MODE
STD M1 M2 M3 M4 M5
Remote control unit
ENTER
Remote control unit
Select the item to change using 0 and 1
buttons.
ADJUST MODE
The contrast , brightness , sharpness and
color (HUE) can be adjusted.
Perform steps 4 and 5 to adjust the picture
quality (ADJUST MODE).
GAMMA (-6 ~ +6)
Select this if dark portions of the picture are
too dark or bright portions are too bright.
Perform steps 7 and 8 to adjust the gamma
correction (GAMMA).
4
Press the ª cursor button to select the adjust
mode, then use the
0 and 1 cursor buttons to
select the image quality adjustment item.
CONTRAST (-6 ~ +6)
Adjusts the contrast of the image.
BRIGHTNESS (0 ~ +12)
Adjusts the pictures brightness.
SHARPNESS (-6 ~ +6)
Adjusts the sharpness of the picture.
HUE (-6 ~ +6)
Adjusts the balance of the green and red. (This
does not affect Progressive Scan images.)
Remote control unit
Press the P.ADJ button during playback.
1
PIC.ADJ
MEMORY 1 GAMMA
0000
Remote control unit
MEMORY 1 GAMMA
CONTRAST
0 000
Remote control unit
Remote control unit
Remote control unit
Use the and ª cursor buttons to set the
adjustment value.
5
Press the ENTER button.
All the adjustments are stored in the memory.
6
7
Use the 0 and 1 cursor buttons to select the
point to be set.
Use the and ª cursor buttons to adjust the
brightness level of the selected point.
(See Reference on page 25.)
The level decreases (the picture gets darker)
when the ª cursor button is pressed and
increases (the picture gets brighter) when the
cursor button is pressed.
Values from 16 to 235 can be set. It is not
possible to set in such a way that the level of
dark sections exceeds that of bright sections.
NOTE:
When the CLEAR button is pressed during
gamma correction, all the setting points are
set back to the standard level.
Progressive images only effective for the first,
third and fifth points from the left.
8
Press the ENTER button.
All the adjustments are stored in the memory.
9
To exit the picture adjust mode
Press the PICTURE ADJUST button.
Remote control unit
ENTER
MEMORY 1 GAMMA
0
0
100
235
Remote control unit
Remote control unit
Remote control unit
ENTER
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon dvd 3800 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Denon dvd 3800

Denon dvd 3800 Bedienungsanleitung - Deutsch, Englisch, Holländisch, Französisch, Italienisch - 46 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info