68570
42
Zoom out
Zoom in
Vorherige Seite
1/46
Nächste Seite
38
Function Setup Function Setup
ENGLISH
ENGLISH
Others
For how to select the setting items and options, refer to “Custom” on page 30.
Initialise the setting or SD Memory Card.
1) Press [SETUP] in stop mode.
2) Use [Y / Z] to select “Initialize”, then press [ENTER].
3) Use [U / V] to select a desired option, then press [ENTER].
“No” : Exit without any initialization.
“Setup” : Reset the SETUP setting to the factory default.
“Memory Device” : Initialises the SD Memory Card. After confirmation message appears, use
[U / V] to select “Yes”, then press [ENTER].
4) Press [ENTER]. (for “Setup” and “Memory Device” only)
5) Press [SETUP] to exit.
Setting items Options
Angle Icon On:
The angle icon appears on the screen when playback
the scene with various angle.
Off*:
The angle icon disappears on the screen.
Screen Saver On*:
If this unit is left with no activity for more than 5
minutes, the screen saver will be activated.
Off:
Sets off the screen saver.
Auto Power Off On*:
If this unit is left with no activity for more than 30
minutes, this unit turns off automatically.
Off:
Sets off the auto power off.
Panel Display
Sets the brightness of the front
panel display.
Bright*:
Front panel display gets brighter.
Dimmer:
Front panel display gets darker.
Auto:
Front panel display gets darker during playback.
Slide Show
Sets the display time for the still
picture (in JPEG format) playback
5sec*
10sec
DivX(R) VOD
Provides DivX
®
VOD registration
code.
For more information about DivX
®
VOD visit
www.divx.com/vod
Others
Angle Icon
Screen Saver
Auto Power Off
Panel Display
Slide Show
DivX(R) VOD
Power Saving
Off
On
On
Bright
5sec
On
Others
Remote Control Setting
Media Select
DENON1
Disc
Setting items Options
Power Saving
Lower the power consumption for
standby mode by denying the
command from RS-232C during
standby mode.
On*:
Denies the command from RS-232C when the power is
in standby mode.
Off:
Accepts the command from RS-232C when the power is
in standby mode.
Remote Control Setting
Changes the signal code of a
remote control. (Refer to page 6)
DENON1*
DENON2
Media Select
Select the media to playback.
Disc*:
Select this when you play back a disc.
SD Memory:
Select this when you play back a SD Memory Card.
Initialise
Note
The setting for “Ratings” will not be reset.
Initialize
Initialize?
No
Setup
Memory Device
E5J00_02_04ED_V2_EN.book Page 38 Thursday, October 16, 2008 12:00 PM
42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon DVD-3800BD wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info