Connecting the DVD-3930 to device with an HDMI terminal using an HDMI cable (sold separately) enables
digital transfer of both digital video signals and multi-channel audio signals.
HDMI audio
Audio recording formatDisc type
¢
Audio setting of device to be connected with an HDMI terminal ( page 17)
2CH
MULTI
(LPCM)
MULTI
(NORMAL)
The multi-channel audio signals are output from the analog
audio output and DENON LINK terminal.
Down-mixed 2-channel audio signals are output from the HDMI
output terminal.
The DTS or Dolby Digital signals can be decoded by the
connected TV or AV amplifier.
(The HDMI audio speaker setting, etc., cannot be made.)
Multi-channel audio signals are output from the HDMI terminal.
The HDMI audio speaker setting, etc., can be made.
Device compatible with DTS or
Dolby Digital decoding
Device compatible with 3 or
more channels of audio inputs
(not DTS or Dolby Digital
compatible)
Device compatible with 2-
channel audio input or device
not compatible with audio
input
DVD-Audio
Dolby Digital
DTS
PCM
LPCM or PPCM
Video CD
Music CD
MP3 CD
2-channel PCM Multi PCM
2CH MULTI (NORMAL) MULTI (LPCM)
2-channel PCM Multi PCM
DVD-Video
Dolby Digital
DTS
2-channel PCM
WMA CD
Super audio CD
Multi PCM
Multi PCM
Multi PCM
MPEG Audio 2-channel PCM Multi PCM Multi PCM
2-channel PCM 2-channel PCM 2-channel PCM
2-channel PCM 2-channel PCM 2-channel PCM
2-channel PCM 2-channel PCM 2-channel PCM
2-channel PCM 2-channel PCM 2-channel PCM
No output No output No output
No output No output No output
2-channel PCM 2-channel PCM 2-channel PCM
Multi PCM2-channel PCM
Stereo area
Multi area
CD layer
¢ For a TV, amplifier, etc.
Status of signal from
the DVD-3930’s HDMI
output terminal
DVI-D-compatible monitor
(Not HDCP compatible)
DVI-D-compatible monitor
(HDCP compatible)
HDMI-compatible monitor
¢ Connection with an HDMI/DVI-D conversion cable (adapter)
• HDMI video streams (video signals) are compatible with DVI-D.
The DVD-3930 can be connected to a TV with a DVI-D terminal using an HDMI/DVI-D conversion cable
(adapter), but depending on the combination of devices in some cases no picture will be output.
• When using an HDMI/DVI-D conversion adapter, the picture may not be output properly due to poor
contact with the connected cable.
Only video signals output *
Neither video nor audio
signals output
Both video and audio
signals output
* The video signals are only output in RGB format.
• Digital transfer is possible up to 24 bit/2ch for 192/176.4 kHz, 24 bit/6ch for 96 kHz or less.
• When making DENON LINK connections, be sure to check the version of the AV amplifier to be
connected then make the “DENON LINK” setting at “initial settings” appropriately ( page 19). If two
DENON LINK terminals of different versions are interconnected, there may be no sound or only noise.
• When “DENON LINK” is set, downmixed audio signals are output from the DVD-3930’s analog audio
output terminals (L/R, FL/FR and AV-1). When using the 5.1-channel analog audio terminals, set the
“DENON LINK” setting in the initial settings to “OFF”.
• The DVD-3930’s speaker settings are invalidated when the DENON LINK terminal is connected. (Make
the speaker settings on the AV amplifier to which the DVD-3930 is connected.)
• With the DENON LINK 2nd connection, Super Audio CD’s multi and stereo signals are not output from
the DENON LINK terminal. Please use the analog audio output terminals.
Monitor or
AV amplifier
AV amplifier
