40
3
B
When “CHANNEL LEVEL” is selected, use the
•
and
ª
cursor
buttons to select the speaker to be adjusted, then use the
0
and
1
cursor buttons to set the level.
• TEST TONE
Use the
0 and 1 cursor buttons to select auto or manual.
Adjust so that the volume of the test tones output from the
different speakers sounds the same.
• The volume level output from the front speakers (left and right
channels), center speaker, surround speakers (left and right
channels) and subwoofer can be adjusted.
• The volume level can be adjusted between 0 and –10 dB in
steps of 1 dB.
✽
Press the RETURN button to return to the “HDMI SPEAKER
SETUP” menu.
B
When “DELAY TIME” is selected:
With 5.1-channel surround sound, ideally the distance between
the listening position and all the speakers aside from the
subwoofer should be the same. The delay time setting can be
used to make the sound from the different speakers reach the
listening position at the same time.
Use the
•
and
ª
cursor buttons to select the setting item, then
press the ENTER button.
• When “DISTANCE” is selected:
METERS (when the
0 cursor button is pressed):
The unit of distance is set to meters (“m”).
FEET (when the
1 cursor button is pressed):
The unit of distance is set to feet (“ft”).
• When “FRONT LCH”, “FRONT RCH”, “CENTER”,
“SURROUND LCH”, ”SURROUND RCH”, “SUBWOOFER” is
selected:
Use the
0 and 1 cursor buttons to set the distance from the
listening position to the different speakers.
The distance can be set within the range of 0 to 18 meters
(60 feet).
The maximum difference in speaker distance for which
adjustment is possible is 4.5 meters (15 feet).
