138818
52
Zoom out
Zoom in
Vorherige Seite
1/92
Nächste Seite
DVD AUDIO-VIDEO/SUPER AUDIO CD PLAYER
DVD-A1XV
OPERATING INSTRUCTIONS
HDM
I/DVI
OPEN/
SUPER AUDIO
CLOSE
CD SETUP
PROGRAM
/DIRECT
CLEAR
CALL
SEARCH M
ODE
PAGE
PICTURE
ADJUST
PURE DI
RECT
DISPLAY
TOP M
ENU
RETURNM
ENU
SKIP
SLOW
/SEARCH
PLAY
STILL/PAUSE
STOP
BACK LIGHT
POW
ER OFF
POW
ER ON
AUDIOSUBTITLE
ANGLE
MARKERRANDOM DIMMERZOOM
PICT ADJ.SETUP MEMORY
A-BREPEAT
SELECT
SELECT FORMAT NTSC/PAL
RC-993
PLAY STOP
OPEN/ CLOSE
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-A1XV
STILL / PAUSE
PURE
DIRECT
SELECT
VIDEO MODE
PUSH ENTER
FORMATSELECT
HDMI / DVI SUPER
AUDIO CD
SET UP
ON / STANDBY
22
IMPORTANT TO SAFETY
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION:
1. Handle the power supply cord carefully
Do not damage or deform the power supply cord. If it is damaged or
deformed, it may cause electric shock or malfunction when used.
When removing from wall outlet, be sure to remove by holding the plug
attachment and not by pulling the cord.
2. Do not open the top cover
In order to prevent electric shock, do not open the top cover.
If problems occur, contact your DENON DEALER.
3. Do not place anything inside
Do not place metal objects or spill liquid inside the DVD audio-video/
Super audio CD player.
Electric shock or malfunction may result.
Please, record and retain the Model name and serial number of your set
shown on the rating label.
Model No. DVD-A1XV Serial No.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
NOTE:
This DVD audio-video/Super audio CD player uses the semiconductor laser.
To allow you to enjoy music at a stable operation, it is recommended to
use this in a room of 5 °C (41 °F) ~ 35 °C (95 °F).
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR REFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR
REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE
PERSONNEL.
Copyrights
It is prohibited by law to reproduce, broadcast, rent or play discs in public
without the consent of the copyright holder.
Urheberrechte
Die Reproduktion, Ausstrahlung, der Verleih sowie die öffentliche
Wiedergabe von Discs erfordern die Zustimmung des
Urheberrechtinhabers.
Droits d’auteur
La reproduction, la diffusion, la location, le prêt ou la lecture publique de
ces disques sont interdits sans le consentement du détenteur des droits
d’auteur.
Copyright
La duplicazione, la trasmissione, il noleggio e la riproduzione dei dischi in
pubblico senza l’autorizzazione scritta del titolare dei diritti di copyright
sono vietati dalla legge.
Derechos de Autor
De acuerdo con las leyes está prohibido reproducir, emitir, alquilar o
interpretar discos en público sin la autorización del propietario de los
derechos de autor.
Auteurstrechten
Het zonder toestemming van de auteursrechthebbenden reproduceren,
uitzenden, verhuren of in het openbaar afspelen van discs is wettelijk
verboden.
Upphovsrätt
Enligt lagen är det förbjudet att återge, utsända, hyra ut eller spela skivor
för allmän publik med mindre tillstånd från ägaren till upphovsrätten först
har inhämtats.
33
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product, to which this
declaration relates, is in conformity with the following standards:
EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3.
Following the provisions of 73/23/EEC, 89/336/EEC and 93/68/EEC
Directive.
ÜBEREINSTIMMUNGSERKLÄRUNG
Wir erklären unter unserer Verantwortung, daß dieses Produkt, auf das
sich diese Erklärung bezieht, den folgenden Standards entspricht:
EN60065, EN55013, EN55020, EN61000-3-2 und EN61000-3-3.
Entspricht den Verordnungen der Direktive 73/23/EEC, 89/336/EEC und
93/68/EEC.
DECLARATION DE CONFORMITE
Nous déclarons sous notre seule responsabilité que l’appareil, auquel se
réfère cette déclaration, est conforme aux standards suivants:
EN60065, EN55013, EN55020, EN61000-3-2 et EN61000-3-3.
D’après les dispositions de la Directive 73/23/EEC, 89/336/EEC et
93/68/EEC.
DICHIARAZIONE DI CONFORMITÀ
Dichiariamo con piena responsabilità che questo prodotto, al quale la
nostra dichiarazione si riferisce, è conforme alle seguenti normative:
EN60065, EN55013, EN55020, EN61000-3-2 e EN61000-3-3.
In conformità con le condizioni delle direttive 73/23/EEC, 89/336/EEC e
93/68/EEC.
DECLARACIÓN DE CONFORMIDAD
Declaramos bajo nuestra exclusiva responsabilidad que este producto al
que hace referencia esta declaración, está conforme con los siguientes
estándares:
EN60065, EN55013, EN55020, EN61000-3-2 y EN61000-3-3.
Siguiendo las provisiones de las Directivas 73/23/EEC, 89/336/EEC y
93/68/EEC.
EENVORMIGHEIDSVERKLARING
Wij verklaren uitsluitend op onze verantwoordelijkheid dat dit produkt,
waarop deze verklaring betrekking heeft, in overeenstemming is met de
volgende normen:
EN60065, EN55013, EN55020, EN61000-3-2 en EN61000-3-3.
Volgens de bepalingen van de Richtlijnen 73/23/EEC, 89/336/EEC en
93/68/EEC.
ÖVERENSSTÄMMELSESINTYG
Härmed intygas helt på eget ansvar att denna produkt, vilken detta intyg
avser, uppfyller följande standarder:
EN60065, EN55013, EN55020, EN61000-3-2 och EN61000-3-3.
Enligt stadgarna i direktiv 73/23/EEC, 89/336/EEC och 93/68/EEC.
CAUTION:
The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, table-cloths, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on the
apparatus.
•Please be care the environmental aspects of battery disposal.
The apparatus shall not be exposed to dripping or splashing for use.
No objects filled with liquids, such as vases, shall be placed on the
apparatus.
ACHTUNG:
Die Belüftung sollte auf keinen Fall durch das Abdecken der
Belüftungsöffnungen durch Gegenstände wie beispielsweise Zeitungen,
Tischtücher, Vorhänge o. Ä. behindert werden.
Auf dem Gerät sollten keinerlei direkten Feuerquellen wie beispielsweise
angezündete Kerzen aufgestellt werden.
Bitte beachten Sie bei der Entsorgung der Batterien die geltenden
Umweltbestimmungen.
Das Gerät sollte keinerlei Flüssigkeit, also keinem Tropfen oder Spritzen
ausgesetzt werden.
Auf dem Gerät sollten keinerlei mit Flüssigkeit gefüllten Behälter wie
beispielsweise Vasen aufgestellt werden.
ATTENTION:
La ventilation ne doit pas être gênée en recouvrant les ouvertures de la
ventilation avec des objets tels que journaux, rideaux, tissus, etc.
Aucune flamme nue, par exemple une bougie, ne doit être placée sur
l’appareil.
•Veillez à respecter l’environnement lorsque vous jetez les piles usagées.
•L’appareil ne doit pas être exposé à l’eau ou à l’humidité.
Aucun objet contenant du liquide, par exemple un vase, ne doit être placé
sur l’appareil.
PRECAUZIONI:
Le aperture di ventilazione non devono essere ostruite coprendole con
oggetti, quali giornali, tovaglie, tende e così via.
Non posizionare sull'apparecchiatura fiamme libere, come ad esempio le
candele accese.
•Prestare attenzione agli aspetti legati alla tutela dell'ambiente quando si
smaltisce la batteria.
L'apparecchiatura non deve essere esposta a gocciolii o spruzzi.
Non posizionare sull'apparecchiatura nessun oggetto contenete liquidi,
come ad esempio i vasi.
PRECAUCIÓN:
La ventilación no debe quedar obstruida por hacerse cubierto las
aperturas con objetos como periódicos, manteles, cortinas, etc.
No debe colocarse sobre el aparato ninguna fuente inflamable sin
protección, como velas encendidas.
•A la hora de deshacerse de las pilas, respete la normativa para el cuidado
del medio ambiente.
No se expondrá el aparato al goteo o salpicaduras cuando se utilice.
No se colocarán sobre el aparato objetos llenos de líquido, como jarros.
WAARSCHUWING:
De ventilatie mag niet worden belemmerd door de ventilatieopeningen af
te dekken met bijvoorbeeld kranten, een tafelkleed, gordijnen, enz.
Plaats geen open vlammen, bijvoorbeeld een brandende kaars, op het
apparaat.
Houd u steeds aan de milieuvoorschriften wanneer u gebruikte batterijen
wegdoet.
Stel het apparaat niet bloot aan druppels of spatten.
Plaats geen voorwerpen gevuld met water, bijvoorbeeld een vaas, op het
apparaat.
OBSERVERA:
•Ventilationen bör inte förhindras genom att täcka för
ventilationsöppningarna med föremål såsom tidningar, bordsdukar,
gardiner osv.
Inga blottade brandkällor, såsom tända ljus, bör placeras på apparaten.
Tänk på miljöaspekterna när du bortskaffar batteri.
Apparaten får inte utsättas för vätska.
Inga objekt med vätskor, såsom vaser, får placeras på apparaten.
ADVARSEL: USYNLIG LASERSTRÅLING VED ÅBNING, NÅR
SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION.
UNDGÅ UDSAETTELSE FOR STRÅLING.
VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA
ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE NÄKYMÄMTTÖMÄLLE LASERSÄTEILYLLE.
VARNING– OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN I DENNA
BRUKSANVISNING SPECIFICERATS, KAN ANVÄNDAREN
UTSÄTTAS FÖR OSYNLIG LASERSTRÅLNING SOM
ÖVERSKRIDER GRÄNSEN FÖR LASERKLASS 1.
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
,
CLASS 1
LASER
PRODUCT
,
,,
ATTENZIONE: QUESTO APPARECCHIO E’ DOTATO DI DISPOSITIVO
OTTICO CON RAGGIO LASER.
L’USO IMPROPRIO DELL’APPARECCHIO PUO’ CAUSARE PERICOLOSE
ESPOSIZIONI A RADIAZIONI!
44
NOTE ON USE / HINWEISE ZUM GEBRAUCH /
OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO
NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA
•Avoid high temperatures.
Allow for sufficient heat dispersion when installed
on a rack.
•Vermeiden Sie hohe Temperaturen.
Beachten Sie, daß eine ausreichend Luftzirkulation
gewährleistet wird, wenn das Gerät auf ein Regal
gestellt wird.
Eviter des températures élevées
Tenir compte d’une dispersion de chaleur suffisante
lors de l’installation sur une étagère.
Evitate di esporre l’unità a temperature alte.
Assicuratevi che ci sia un’adeguata dispersione del
calore quando installate l’unità in un mobile per
componenti audio.
Evite altas temperaturas
Permite la suficiente dispersión del calor cuando
está instalado en la consola.
•Vermijd hoge temperaturen.
Zorg voor een degelijk hitteafvoer indien het
apparaat op een rek wordt geplaatst.
Undvik höga temperaturer.
Se till att det finns möjlighet till god värmeavledning
vid montering i ett rack.
Handle the power cord carefully.
Hold the plug when unplugging the cord.
Gehen Sie vorsichtig mit dem Netzkabel um.
Halten Sie das Kabel am Stecker, wenn Sie den
Stecker herausziehen.
Manipuler le cordon d’alimentation avec précaution.
Tenir la prise lors du débranchement du cordon.
Manneggiate il filo di alimentazione con cura.
Agite per la spina quando scollegate il cavo dalla
presa.
Maneje el cordón de energía con cuidado.
Sostenga el enchufe cuando desconecte el cordón
de energía.
Hanteer het netsnoer voorzichtig.
Houd het snoer bij de stekker vast wanneer deze
moet worden aan- of losgekoppeld.
Hantera nätkabeln varsamt.
Håll i kabeln när den kopplas från el-uttaget.
Keep the set free from moisture, water, and dust.
Halten Sie das Gerät von Feuchtigkeit, Wasser und
Staub fern.
•Protéger l’appareil contre l’humidité, l’eau et
lapoussière.
•Tenete l’unità lontana dall’umidità, dall’acqua e dalla
polvere.
Mantenga el equipo libre de humedad, agua y polvo.
Laat geen vochtigheid, water of stof in het apparaat
binnendringen.
Utsätt inte apparaten för fukt, vatten och damm.
Unplug the power cord when not using the set for
long periods of time.
•Wenn das Gerät eine längere Zeit nicht verwendet
werden soll, trennen Sie das Netzkabel vom Netzstecker.
Débrancher le cordon d’alimentation lorsque l’appareil
n’est pas utilisé pendant de longues périodes.
Disinnestate il filo di alimentazione quando avete
l’intenzione di non usare il filo di alimentazione per un
lungo periodo di tempo.
Desconecte el cordón de energía cuando no utilice el
equipo por mucho tiempo.
Neem altijd het netsnoer uit het stopkontakt wanneer
het apparaat gedurende een lange periode niet wordt
gebruikt.
Koppla ur nätkabeln om apparaten inte kommer att
användas i lång tid.
* (For sets with ventilation holes)
Do not obstruct the ventilation holes.
Die Belüftungsöffnungen dürfen nicht verdeckt
werden.
Ne pas obstruer les trous d’aération.
Non coprite i fori di ventilazione.
No obstruya los orificios de ventilación.
De ventilatieopeningen mogen niet worden beblokkeerd.
Täpp inte till ventilationsöppningarna.
Do not let foreign objects in the set.
Keine fremden Gegenstände in das Gerät kommen
lassen.
Ne pas laisser des objets étrangers dans l’appareil.
E’ importante che nessun oggetto è inserito
all’interno dell’unità.
No deje objetos extraños dentro del equipo.
Laat geen vreemde voorwerpen in dit apparaat vallen.
Se till att främmande föremål inte tränger in i
apparaten.
Do not let insecticides, benzene, and thinner come in
contact with the set.
Lassen Sie das Gerät nicht mit Insektiziden, Benzin
oder Verdünnungsmitteln in Berührung kommen.
Ne pas mettre en contact des insecticides, du
benzène et un diluant avec l’appareil.
Assicuratevvi che l’unità non venga in contatto con
insetticidi, benzolo o solventi.
No permita el contacto de insecticidas, gasolina y
diluyentes con el equipo.
Laat geen insektenverdelgende middelen, benzine of
verfverdunner met dit apparaat in kontakt komen.
Se till att inte insektsmedel på spraybruk, bensen och
thinner kommer i kontakt med apparatens hölje.
Never disassemble or modify the set in any way.
•Versuchen Sie niemals das Gerät auseinander zu
nehmen oder auf jegliche Art zu verändern.
Ne jamais démonter ou modifier l’appareil d’une
manière ou d’une autre.
Non smontate mai, nè modificate l’unità in nessun
modo.
Nunca desarme o modifique el equipo de ninguna
manera.
Nooit dit apparaat demonteren of op andere wijze
modifiëren.
•Ta inte isär apparaten och försök inte bygga om den.
55
About the operating instructions on the
CD-ROM [ ENGLISH ]
1. Check the computer environment.
Adobe Acrobat Reader
5.0 or later is required to view the text.
If Adobe Acrobat Reader
is not installed on the computer, install it from
the included CD-ROM. (Adobe Reader 6.0)
[Windows] AdbeRdr60_ece.exe
Adobe Reader 6.0 system requirements
[Windows]
Intel
Pentium
processor
Microsoft
Windows 98 Second Edition, Windows Millennium
Edition, Windows NT
4.0 with Service Pack 6, Windows 2000 with
Service Pack 2, Windows XP Professional or Home Edition, Windows
XP Tablet PC Edition
32MB of RAM (64MB recommended)
60MB of available hard-disk space
Internet Explorer 5.01, 5.5, 6.0, or 6.1
2. Open the operating instructions’ file.
Open the file “DVDA1XV_ENGLISH.pdf”.
[If you cannot view the contents of the CD-ROM]
Contact one of the sales agents shown on the included “Service
Station” list. The operating instructions in the requested language
will be sent to you in writing (copy).
Wissenswertes über die Bedienungsanleitung
auf der CD-ROM
[ DEUTSCH ]
1. Überprüfen Sie die Computer-Umgebung.
Adobe Acrobat Reader 5.0
oder neuer ist für das Lesen des Textes
erforderlich.
Falls Adobe Acrobat Reader
mich auf dem Computer installiert ist,
installieren Sie das Programm bitte von der im Lieferumfang enthaltenen
CD-ROM aus. (Adobe Reader 6.0)
[Windows] AdbeRdr60_deu_full.exe
Adobe Reader 6.0 Systemanforderungen
[Windows]
Intel
Pentium
-Prozessor
Microsoft
Windows 98 Second Edition, Windows Millennium
Edition, Windows NT
4.0 mit Service Pack 6, Windows 2000 mit
Service Pack 2, Windows XP Professional oder Home, Windows XP
Tablet PC Edition
32 MB RAM (64 MB empfohlen)
60 MB freier Festplattenspeicher
Internet Explorer 5.01, 5.5, 6.0 oder 6.1
2. Öffnen Sie die Datei mit der Bedienungsanleitung.
•Öffnen Sie die Datei “DVDA1XV_DEUTSCH.pdf”.
[Falls Sie den Inhalt der CD-ROM nicht lesen können]
Konsultieren Sie eine der in der im Lieferumfang enthaltenen
“Kundenservice-Stellen“ aufgelisteten Verkaufsstellen. Die in der
gewünschten Sprache verfasste Bedienungsanleitung wird Ihnen
dann als Schriftdokument (Kopie) zugestellt.
A propos du mode d’emploi fourni sur le
CD-ROM [ FRANCAIS ]
1. Vérifier l’équipement de l’ordinateur.
Adobe Acrobat Reader
5.0 ou ultérieur est nécessaire pour lire le
texte.
Si Adobe Acrobat Reader
n’est pas installé sur l’ordinateur, installez-le
à partir du CD-ROM fourni. (Adobe Reader 6.0)
[Windows] AdbeRdr60_fra_full.exe
Configuration requise pour Adobe Reader 6.0
[Windows]
•Processeur Intel
Pentium
Microsoft
Windows 98 Deuxième Edition, Windows Millennium
Edition, Windows NT
4.0 avec Service Pack 6, Windows 2000 avec
Service Pack 2, Windows XP Edition Professionnelle ou Familiale,
Windows XP Edition Tablet PC
•32 Mo de RAM (64 Mo recommandés)
60 Mo d’espace disque disponible
Microsoft Internet Explorer 5.01, 5.5, 6.0 ou 6.1
2. Ouvrez le fichier du mode d’emploi.
Ouvrez le fichier “DVDA1XV_FRANCAIS.pdf”.
[Si vous ne pouvez pas lire le contenu du CD-ROM]
Contactez un des revendeurs figurant dans la liste “Service Station”
fournie. Le mode d’emploi dans la langue requise vous sera envoyé
sur papier (copie).
Informazioni sul Manuale delle istruzioni
incluso nel CD-ROM [ ITALIANO ]
1. Controllare l’ambiente informatico.
È necessario disporre di Adobe Acrobat Reader 5.0
o versione
successiva per visualizzare il testo.
Se Adobe Acrobat Reader
non è installato sul computer in uso, installarlo
dal CD-ROM incluso. (Adobe Reader 6.0)
[Windows] AdbeRdr60_ita_full.exe
Requisiti di sistema per Adobe Reader 6.0
[Windows]
•Processore Intel
Pentium
Microsoft
Windows 98 Second Edition, Windows Millennium
Edition, Windows NT
4.0 con Service Pack 6, Windows 2000 con
Service Pack 2, Windows XP Professional o Home Edition, Windows
XP Tablet PC Edition
32 MB di RAM (64 MB consigliati)
60 MB di spazio disponibile su disco rigido
Internet Explorer 5.01, 5.5, 6.0 o 6.1
2. Aprire il file del Manuale delle istruzioni.
Aprire il file “DVDA1XV_ITALIANO.pdf”.
[Se non è possibile visualizzare il contenuto del CD-ROM]
Rivolgersi a un agente di vendita presente nell'elenco “Stazione di
servizio” incluso. Il Manuale delle istruzioni nella lingua richiesta
verrà inviato per posta (copia).
66
Acerca de las instrucciones de funcionamiento
del CD-ROM
[ ESPAÑOL ]
1. Compruebe el entorno del ordenador.
Se necesita la versión del Adobe Acrobat Reader
5.0 o una superior
para ver el texto.
Si la versión del Adobe Acrobat Reader
no está instalada en el ordenador,
instálela desde el CD-ROM suministrado. (Adobe Reader 6.0)
[Windows] AdbeRdr60_esp_full.exe
Requisitos del sistema de Adobe Reader 6.0
[Windows]
•Procesador Intel
Pentium
Microsoft
Windows 98 Second Edition, Windows Millennium
Edition, Windows NT
4.0 con Service Pack 6, Windows 2000 con
Service Pack 2, Windows XP Professional o Home Edition, Windows
XP Tablet PC Edition
32 MB de RAM (se recomiendan 64 MB)
60 MB de espacio disponible en el disco duro
Internet Explorer 5.01, 5.5, 6.0 ó 6.1
2. Abra el archivo de las instrucciones de funcionamiento.
Abra el archivo “DVDA1XV_ESPANOL.pdf”.
[Si no puede visualizar el contenido del CD-ROM]
Póngase en contacto con uno de los agentes de venta que aparecen
en la lista “Estación de servicio” suministrada. Se le enviaran las
instrucciones de funcionamiento en el idioma solicitado por escrito
(copia).
Over de gebruiksaanwijzing op de CD-ROM
[ NEDERLANDS ]
1. Controleer de computeromgeving.
Om de tekst te bekijken, is Adobe Acrobat Reader
5.0 of hoger vereist.
Als Adobe Acrobat Reader
niet geïnstalleerd is op de computer, installeert
u dit programma vanaf de bijgeleverde CD-ROM. (Adobe Reader 6.0)
[Windows] AdbeRdr60_nld_full.exe
Adobe Reader 6.0 – Systeemvereisten
[Windows]
Intel
Pentium
-processor
Microsoft
Windows 98 Second Edition, Windows Millennium
Edition, Windows NT
4.0 met Service Pack 6, Windows 2000 met
Service Pack 2, Windows XP Professional of Home Edition,
Windows XP Tablet PC Edition
32 MB RAM (64 MB aanbevolen)
60 MB vrije schijfruimte
Internet Explorer 5.01, 5.5, 6.0 of 6.1
2. Open het bestand van de gebruiksaanwijzing.
Open het bestand “DVDA1XV_NEDERLANDS.pdf”.
[Als u de inhoud van de CD-ROM niet kunt bekijken]
Neem contact op met een van de verkooppunten die staan vermeld
in de bijgevoegde lijst van “Onderhoudscentra”. U zal dan een gedrukt
exemplaar van de gebruiksaanwijzing in de gewenste taal ontvangen.
Om bruksanvisningarna på CD-ROM-
skivan [ SVENSKA ]
1. Kontrollera datormiljön.
Adobe Acrobat Reader
5.0 eller senare behövs för att visa texten.
Om Adobe Acrobat Reader
inte är installerad på datorn, ska du installera
det från den medföljande CD-ROM-skivan. (Adobe Reader 6.0)
[Windows] AdbeRdr60_sve_full.exe
Adobe Reader 6.0 – systemkrav
[Windows]
Intel
Pentium
processor
Microsoft
Windows 98 Second Edition, Windows Millennium
Edition, Windows NT
4.0 med Service Pack 6, Windows 2000 med
Service Pack 2, Windows XP Professional eller Home Edition,
Windows XP Tablet PC Edition
32 MB RAM (64 MB rekommenderas)
60 MB ledigt hårddiskutrymme
Internet Explorer 5.01, 5.5, 6.0 eller 6.1
2. Öppna filen med instruktioner.
Öppna filen “DVDA1XV_SVENSKA.pdf”.
[Om du inte kan visa innehållet på CD-ROM-skivan]
Kontakta en av försäljningsagenterna i “Service Station”-listan.
Bruksanvisningarna på nödvändigt språk kommer att skickas till dig
skriftligt (kopia).
77
— TABLE OF CONTENTS —
z
Features...................................................................................8, 9
x
Discs ..........................................................................................10
c
Cautions on Handling Discs.......................................................11
v
Connections ......................................................................12 ~ 22
b
Part Names and Functions................................................23 ~ 26
n
Remote Control Unit .........................................................27 ~ 29
m
Loading Discs ............................................................................30
,
Changing the Default Settings..........................................31 ~ 56
.
Using the Pure Direct Mode................................................57, 58
⁄0
Using the Super Audio CD Setup..............................................58
⁄1
Adjusting the Picture Quality ............................................59 ~ 62
⁄2
Using the Video Setup ......................................................63 ~ 65
⁄3
Playback ............................................................................66 ~ 70
ACCESSORIES
Please check to make sure the following items are included with the main unit in the carton:
q Audio cord ................................................................................1
w Video cord.................................................................................1
e Remote control unit (RC-993)...................................................1
r R6P/AA batteries ......................................................................3
t Power supply cord....................................................................1
y DENON LINK cord....................................................................1
u IEEE 1394 cord.........................................................................1
i
CD-ROM (Operating instructions)
............................................1
o Operating instructions ..............................................................1
!0 Service station list ....................................................................1
er
t
⁄4
Playing Repeatedly ..............................................................71, 72
⁄5
Playing Tracks in the Desired Order ..........................................73
⁄6
Playing Tracks in the Random Order .........................................74
⁄7
Using the On-screen Display.....................................................75
⁄8
Using the Multiple Audio, Subtitle and Angle Functions ..76 ~ 78
⁄9
Using the Menus.................................................................79, 80
¤0
Marking Scenes you want to see again ....................................81
¤1
Playing in the Zoom Mode ........................................................82
¤2
Playing MP3.........................................................................83, 84
¤3
Playing WMA.............................................................................85
¤4
Playing Still Picture Files (JPEG format)............................86 ~ 88
¤5
Troubleshooting ...................................................................89, 90
¤6
Main Specifications....................................................................91
yu
q
w
i
8
1
FEATURES
1. Newly developed high performance 10 bit I/P converter
performing all processing with a precision of 10 bits
A high precision film/video source detection function not only
makes the DVD-A1XV compatible with 30 frame film sources,
but also achieves high quality images with smooth, natural
pictures and little jaggy noise even when playing images that
presented problems during editing. In addition, a large number
of picture quality adjustment functions, including noise
reduction and digital gamma correction, enables output of not
only progressive but also HDMI/DVI signals, so fine
adjustments can be made according to the display you are
using.
2. Newly developed 10-bit scaler for high definition pixel
conversion
The DVD-A1XV is equipped with a newly developed scaler that
uses an original algorithm to conduct pixel conversion of the
video output signals which have been given optimum
progressive processing with the I/P converter into higher
definition 720P or 1080i signals with 10-bit precision. This in
conjunction with the high performance 10-bit I/P converter
makes for effective high picture quality playback, and enables
output for digital signals via the HDMI/DVI connectors without
reduction in picture quality due to analog conversion.
In addition, the signals are optimized for output to the
independent HDMI and DVI transmitters, so two digital video
signals can be output at the same time.
3. DPI (DENON Pixel Image) correction function for more
natural outline correction
DENON has developed an outline correction circuit using a
new algorithm that samples the image data of pixels adjacent
to the perceived pixels and processes them. The image is
detected and processed in units of pixels in the vertical,
horizontal and diagonal directions, thereby generating more
natural outlines.
In addition, other processing is performed in ways optimum for
the images, for example brightness signals and color signals
are processed with independent algorithms, ringing that tends
to occur when images are enhanced is restrained, etc.,
thereby achieving more natural images with no reduction in
picture quality.
4. 14-bit/216 MHz video D/A converter (NOTE 1)
The DVD-A1XV uses a video D/A converter that conducts D/A
conversion of all video signals at 14 bits and allows 8X
oversampling in the progressive mode to achieve the high
quality picture that DVDs are meant to provide. In addition,
NSV technology reduces noise upon D/A conversion.
5. HDMI/DVI digital video interface (NOTE 2)
HDMI Ver. 1.1 enables digital transfer of the video and audio
signals of DVD audio discs that are copyright-protected by
CPPM, something that was not possible with HDMI Ver. 1.0.
The DVD-A1XV is HDMI Ver. 1.1 compatible.
(1) HDMI connector
Digital video signals are transferred in Y Cb Cr or RGB.
The audio signals can be transferred simultaneously, so
both audio and video signals can be transferred with a
single cable.
(2) DVI-D connector
Digital video signals are transferred in RGB.
6. Advanced AL24 Processing
“Advanced AL24 Processing” which greatly increases the
amount of information in the time axis area using unique high
speed signal detection and processing technology for the PCM
signal (CD/DVD) playback circuitry is provided for 2-channel
output. In addition to expansion of data to 24 bits, natural
signal correction without marring the original data is performed
with upconversion sampling.
In addition, DENON’s original analog waveform reproduction
technology, “AL24 Processing PLUS”, is used for the 5.1-
channel audio output, resulting in high sound quality for all
PCM signal sources.
7. High precision 24-bit D/A converter
The audio playback circuit includes an advanced segment type
D/A converter with the high technical specifications in the
business, manufactured by Burr-Brown, a company with an
established reputation for D/A converters. This high
performance D/A converter allows not only input of the 24-
bit/192 kHz data of DVD-Audio discs, it also includes an analog
pure FIR filter for ideal DSD playback of Super Audio CDs.
Furthermore, for mixed left and right channel signals, this D/A
converter is used for independent monaural modes for both
the left and right channels, a true luxury enabling playback of
even high quality signals.
8. DENON LINK/IEEE1394 digital audio transfer connectors
(1) DENON LINK terminal
This terminal can be used for digital transfer of not only
DVD video signals but also multi-channel audio signals of
DVD audio.
(2) IEEE 1394 terminal
This terminal can be used for digital transfer of not only
DVD video signals, but also DVD audio signals, Super
Audio CD signals and other multi-channel audio signals.
9. THX
®
Ultra Certification, the symbol of excellent high
quality (NOTE 3)
The DVD-A1XV meets THX
®
Ultra standards, a strict set of
criteria advocated by Lucasfilm on the picture and sound
quality of DVD video players and their operability with
connected equipment. This makes it possible to achieve the
high quality pictures and sound.
9
10. Super Audio CD multi-channel playback compatibility
In addition to playing DVD audio and video discs, the DVD-
A1XV can play multi-channel Super Audio CDs with a playback
frequency range covering 100 kHz and a dynamic range of 120
dB or greater within the audible frequency range, and a
maximum of 5.1 channels can be output.
11. HDCD
®
(High Definition Compatible Digital
®
) decoder
(NOTE 4)
HDCD is an encoding/decoding technology that greatly
reduces the distortion occurring at the time of digital recording
while maintaining compatibility with the conventional CD
format. HDCD allows 20-bit data to be converted into the 16-
bit data of current CDs with no loss in sound quality.
12. Dolby Digital/DTS decoder (NOTE 5, 6)
The DVD-A1XV is equipped with a built-in Dolby Digital/DTS
decoder, allowing you to recreate the atmosphere of a movie
theater or concert hall when using the DVD-A1XV in
combination with an AV amplifier and speakers.
13. Thorough vibration-resistant design
(1) Mechanism using a hybrid loader.
(2) The pickup mechanism is positioned at the center to
reduce the effects of external vibrations.
(3) A heavyweight chassis and low center of gravity make for
a low vibration design.
(4) The six blocks (mechanism + control unit, audio unit, video
unit, digital interface unit, analog power unit and digital
power unit) are structurally isolated, in a design that
eliminates mutual interference.
14. Multiple functions
(1) Still picture playback function
Kodak Picture CD (NOTE 7) and Fujifilm Fujicolor CD
(NOTE 8) can be played on the DVD-A1XV.
Still images stored in JPEG format on CD-R/RWs can also
be played.
(2) Windows Media™ playback function (NOTE 9)
Windows Media™ CDs can be played on the DVD-A1XV.
(3) Multiple audio function
Selection of up to 8 audio languages.
(The number of languages offered differs from DVD to
DVD.)
(4) Multiple subtitle function
Selection of up to 32 subtitle languages.
(The number of languages offered differs from DVD to
DVD.)
(5) Multiple angle function
The angle of view can be changed.
(For DVDs on which multiple angles are recorded.)
(6) GUI (Graphical User Interface) function
The DISPLAY button on the remote control unit can be
used to display player and disc information on the TV
screen.
(7) Marker function
The positions of up to five scenes can be stored in the
memory, so you can watch your favourite scenes
whenever you want.
(8) Playback disable function
This function can be used to disable playback of DVDs you
do not want children to watch.
NOTES:
1. “NSV” is a trademark of Analog Devices, Inc.
2. HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
3. Manufactured under license of Lucasfilm Ltd. Lucasfilm and
THX® Ultra are registered trademarks of Lucasfilm Ltd.
4.
®
, HDCD
®
, High Definition Compatible Digital
®
and
Microsoft
®
are either registered trademarks or trademarks of
Microsoft Corporation, Inc. in the United States and/or other
countries. HDCD system manufactured under license from
Microsoft Corporation, Inc. This product is covered by one or
more of the following: In the USA: 5,479,168, 5,638,074,
5,640,161, 5,808,574, 5,838,274, 5,854,600, 5,864,311,
5,872,531, and in Australia: 669114. Other patents pending.
5. Manufactured under license from Dolby Laboratories. “Dolby”
and the double-D symbol are trademarks of Dolby
Laboratories.
6. “DTS” and ”DTS Digital Surround” are registered trademarks
of Digital Theater Systems, Inc.
7. “KODAK” is a trademark of Eastman Kodak Company.
8. “FUJICOLOR CD” is a trademark of Fuji Photo Film Co, Ltd.
9. “Windows Media™”, “Windows
®
”are a trademarks of
Microsoft Corporation, Inc.
10
2
DISCS
The types of discs listed on the table below can be used on the
DVD-A1XV.
The marks are indicated on the disc labels or jackets.
Usable
discs
Mark (logo)
Recorded
signals
Disc size
DVD video
DVD audio
(NOTE 1)
DVD-R
DVD-RW
(NOTE 2)
DVD+R
(NOTE 2, 3)
DVD+RW
(NOTE 2)
Digital audio +
digital video
(MPEG2)
12 cm
8 cm
12 cm
8 cm
12 cm
8 cm
Digital audio +
digital video
(MPEG1)
Digital audio
MP3
Digital picture
(JPEG)
Video CD
(NOTE 1)
CD
CD-R
CD-RW
(NOTE 4)
2 The following types of discs cannot be played on the
DVD-A1XV:
For European model:
DVDs with region numbers other than “2” or “ALL”
For Oceanian, South American model:
DVDs with region numbers other than “4” or “ALL”
DVD-ROM/RAMs
CD-ROMs (unless MP3, JPEG, WMA Files)
CVD/VSDs/SVCD
CDVs (Only the audio part can be played.)
CD-Gs (Only the audio is output.)
Photo CDs
NOTE:
1. Some DVD audio, DVD video and video CD discs do not
operate as described in this manual due to the intentions of
the discs’ producers.
2. The DVD-A1XV cannot play DVD-R, -RW, +R and +RW discs
recorded in the “VR” mode or with “CPRM”.
If you wish to play images recorded using a DVD recorder on
the DVD-A1XV, set the DVD recorder to the “Video mode”
(to record in the DVD-Video format) and record on a DVD-R,
-RW, +R or +RW disc.
Discs that have not be finalized cannot be played.
Depending on the disc’s recording status, the disc may not
be accepted or may not be played normally (the picture or
sound may be not be smooth, etc.).
3. DVD+R DL.(Dual Layer) cannot be played.
4. According to recording quality, some CD-R/RW cannot be
played.
Recordable
ReWritable
12 cmJPEG
Kodak
Picture CD
R
R
R
W
R
W
12 cmDigital audio
Super
audio CD
12 cm
12 cm
JPEG
Digital audio
Fujicolor
CD
WMA
(Windows
Media
Audio)
DVD+R
DVD+ReWritable
Titles and chapters (DVD-videos)
DVD-videos are divided into several large sections called
“titles” and smaller sections called “chapters”.
Numbers are allotted to these sections. These numbers are
called “title numbers” and “chapter numbers”.
Playback control (video CDs)
Video CDs including the words “playback control” on the
disc or jacket are equipped with a function for displaying
menus on the TV screen for selecting the desired position,
displaying information, etc., in dialog fashion.
In this manual, playing video CDs using such menus is
referred to “menu playback”.
Video CDs with playback control can be used on the DVD-
A1XV.
NOTE:
This DVD player is designed and manufactured to respond
to the Region Management Information that is recorded on
a DVD disc.
If the Region number described on the DVD disc does not
correspond to the Region number of this DVD player, this
DVD player cannot play this disc.
For European model:
The Region number for this DVD player is 2.
For Oceanian, South American model:
The Region number for this DVD player is 4.
Tracks (Super audio CDs, video and music CDs)
Super audio CDs, video and music CDs are divided into
sections called “tracks”.
Numbers are allotted to these sections. These numbers are
called “track numbers”.
For example:
For example:
Title 1
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
Title 2
Track 1 Track 2 Track 3 Track 4 Track 5
2 Disc terminology
Groups and tracks (DVD-audios)
DVD-audios are divided into several large sections called
“groups” and smaller sections called “tracks”.
Numbers are allotted to these sections. These numbers are
called “group numbers” and “track numbers”.
For example:
Group 1
Track 1 Track 2 Track 3 Track 1 Track 2
Group 2
2
4
11
3
CAUTIONS ON HANDLING DISCS
Discs
Only the discs including the marks shown on page 10 can be
played on the DVD-A1XV.
Note, however, that discs with special shapes (heart-shaped
discs, hexagonal discs, etc.) cannot be played on the DVD-A1XV.
Do not attempt to play such discs, as they may damage the
player.
Cautions on Handling Discs
Do not get fingerprints, grease or dirt on discs.
Be especially careful not to scratch discs when removing them
from their cases.
Do not bend discs.
Do not heat discs.
Do not enlarge the center hole.
Do not write on the labeled (printed) side with a ball-point pen
or a pencil.
•Water droplets may form on the surface if the disc is moved
suddenly from a cold place to a warm one. Do not use a
hairdryer, etc., to dry the disc.
Cautions on Storing Discs
Always eject discs after playing them.
Keep discs in their cases to protect them from dust, scratches
and warping.
Do not put discs in the following places:
1. Places exposed to direct sunlight for long periods of time
2. Humid or dusty places
3. Places exposed to heat from heaters, etc.
Cautions on Loading Discs
Only load one disc at a time. Loading one disc on top of another
may result in damage or scratch the discs.
Load 8 cm discs securely in the disc guide, without using an
adapter. If the disc is not properly loaded, it may slip out of the
guide and block the disc tray.
Be careful not to let your fingers get caught when the disc tray
is closing.
Do not place anything but discs in the disc tray.
Do not load cracked or warped discs or discs that have been
fixed with adhesive, etc.
Do not use discs on which the adhesive part of cellophane tape
or glue used to attach the label is exposed, or discs with traces
of tape or labels that have been peeled off. Such discs may get
stuck inside the player, resulting in damage.
Holding Discs
Avoid touching the surface of discs when loading and unloading
them.
Cleaning Discs
2
Fingerprints or dirt on the disc may lower sound and picture
quality or cause breaks in playback. Wipe off fingerprints or
dirt.
2
Use a commercially available disc cleaning set or a soft cloth to
wipe off fingerprints or dirt.
Be careful not to get
fingerprints on the signal
surface (the side which
shines in rainbow colors).
Wipe gently from the middle
outwards.
Do not wipe with a circular
motion.
NOTE:
Do not use record spray or antistatic. Also do not use
volatile chemicals such as benzene or thinner.
Record
spray
Thinner Benzene
CAUTIONS ON INSTALLATION
Note:
For heat dispersal, do not install this equipment in a confined
space such as a book case or similar unit.
Note
wall
12
4
CONNECTIONS
Read the manuals of all the components when making
connections.
Keep the power supply cord unplugged until all connections
have been completed.
If the power is on when connections are made, noise may
be generated and damage the speakers.
Be sure to connect the left and right channels properly, L
(left) to L, R (right) to R.
Plug the power supply cord securely into the power outlet.
Incomplete connection may result in noise.
Binding the power supply cord together with connection
cords may result in humming or noise.
NOTES:
(1) Connecting to a TV
Use the included audio video cord to connect the TV’s video input connector and audio input connectors to the DVD-A1XV’s VIDEO
OUT or S-VIDEO OUT and AUDIO OUT.
DVD-A1XV
TV
S-Video output connector
The video signals are divided into color (C) and brightness (Y) signals, achieving a clearer
picture.
If the TV is equipped with an S-Video input connector, we recommend connecting it to the
DVD-A1XV’s S-Video output connector using a commercially available S-Video connection
cord.
To power outlet
NOTES:
Connect the DVD-A1XV’s video outputs to the TV either directly or through an AV amplifier. Do not connect it via a VCR (video
cassette recorder). Some discs contain copy prohibit signals. If such discs are played via a VCR, the copy prohibit system may
cause disturbance in the picture.
Set the “TV TYPE” in “VIDEO SETUP” in “SETUP” to comply with your TV’s video format. When the TV is PAL formatted set to
PAL. (See pages 43, 44.)
Use the “2ch AUDIO OUT” connectors to connect a TV to the DVD-A1XV. To use with 5.1ch audio output, set “2CH (SRS OFF)” or
“2CH (SRS ON)” under “AUDIO CHANNEL” in “AUDIO SETUP” on the “SETUP” menu to the initial settings. (See pages 46, 47.)
Set the “TV ASPECT” in “VIDEO SETUP” in “SETUP” to comply with your TV’s aspect. (See page 43.)
•To use with video out or s-video output, set “INTERLACED” in “TV SYSTEM” in “VIDEO SETUP” in “SETUP” at the initial
settings. (See pages 43, 44.)
13
(2) Connecting to a TV or Monitor Equipped with Component Video Input Connectors
To power outlet
Component video output connectors (PR/CR, PB/CB and Y)
The red (P
R/CR), blue (PB/CB) and brightness (Y) signals are output independently, achieving more faithful
reproduction of the colors.
The component video input connectors may be marked differently on some TVs or monitors (P
R, PB and Y/R-
Y, B-Y and Y/C
R, CB and Y, etc.). For details, refer to the TV’s operating instructions.
Connect in this way if your TV is compatible with Progressive Scan.
NOTES:
Use the three commercially available video cords to connect the DVD-A1XV’s component video output connectors to the TV or
monitor.
Set the “TV TYPE” in “VIDEO SETUP” in “SETUP” to comply with your TV’s video format. When the TV is PAL formatted set to
PAL. (See pages 43, 44.)
Set the “COMPONENT VIDEO OUT” in “VIDEO SETUP” in “SETUP” to comply with Progressive TV.
Use the “2ch AUDIO OUT” connectors to connect a TV to the DVD-A1XV. To use with 5.1ch audio output, set “2CH (SRS OFF)”
or “2CH (SRS ON)” in “AUDIO CHANNEL” in “AUDIO SETUP” in “SETUP” at the initial settings. (See pages 46, 47.)
Set the “TV ASPECT” in “VIDEO SETUP” in “SETUP” to comply with your TV’s aspect. (See page 43.)
TV
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE “STANDARD DEFINITION”
OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD
PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
DVD-A1XV
14
2 Connecting an optical fiber cable (commercially available) to the digital audio input connector (OPTICAL)
Line up in proper direction
Remove the dust cap, line up the cable in the proper directly, then
insert it securely as far as it goes.
NOTE:
Store the dust cap in a safe place, and be careful not to
lose it.
When not using the terminal, attach the cap to protect the
terminal from dust.
CH SEL
ENTER
(4) Connecting to a AV amplifier with a built-in decoder
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital or DTS bitstream signals are output from the DVD player’s digital
audio output connectors. If a Dolby Digital or DTS decoder is connected, you can achieve sound with the power and sense of presence
of a movie theater or concert hall.
DVD-A1XV
Digital audio input connector
(OPTICAL)
Digital audio input connector
(COAXIAL)
AV amplifier with a built-in decoder
(AV control center)
Optical fiber cable
(commercially available)
75/ohms pin-plug cable
(commercially available)
(or)
NOTE:
Some discs contain copy prohibit signals. If such discs are played via a VCR, the copy prohibit system may cause disturbance in
the picture.
Set the “TV TYPE” in “VIDEO SETUP” in “SETUP” to comply with your TV’s video format. When the TV is PAL formated, set to
PAL. (See pages 43, 44.)
(3) Connecting to a TV with 21-pin SCART Terminal
Use the commercially 21-pin SCART cable to connect the TV’s 21-pin SCART terminal to the DVD-A1XV’s 21-pin SCART terminal (AV1).
DVD-A1XV
21-pin SCART terminal
TV
•To improve picture quality, you can change the video signal output from the AV1 terminal from “Video” to either “S-Video” or “RGB”
to suit the type of television you are using (See page 45.).
Dust cap
NOTE:
Harsh noise that could harm your ears or damage the speakers is generated when a DVD recorded in DTS is played while using
a decoder, etc., that is not DTS-compatible.
15
2 Sound output from the DVD-A1XV’s digital audio output connectors
[ In the case of bitstream output ]
*1 Only 48 kHz/16 bit sources are output.
*2 Only 44.1 kHz/16 bit sources are output.
*3 44.1 kHz/16-bit PCM signals are output during CD layer playback.
Down-mixed to 2 channels for multi-channel PCM sources. (Only the front left and right channels are output for sources for which
down-mixing is prohibited.)
When playing copyright-protected linear PCM or packed PCM DVDs, in consideration of copyrights, no digital signals are output for
sources exceeding 48 kHz/16 bits. When playing such sources, either set “LPCM (44.1 kHz/48 kHz)” under “AUDIO SETUP” at
“SETUP” to “ON” (See pages 46, 50.) or make analog connections. (See page 16.)
When making digital connections to an AV amplifier that is not compatible with 96 kHz/88.2 kHz signals, set “LPCM (44.1 kHz/48 kHz)”
under “AUDIO SETUP” at “SETUP” to “ON”. (See pages 46, 50.)
•With Super audio CDs, digital audio signals cannot be output from the digital out terminals. Use analog or IEEE1394 connections. (See
pages 16, 19, 20.)
When “DIGITAL OUTPUT : OFF” is selected at the
PURE DIRECT MODE
, digital signals are not output from the digital audio output
at this time.
Bitstream signals are signals that are compressed and converted into digital format. They are decoded into multi-channel audio signals
(5.1-channel, etc.) by the decoder.
Linear PCM audio is the signal recording format used for music CDs.
While the signals are recorded at 44.1 kHz/16 bit for music CDs, for DVDs they are recorded at 44.1 kHz/16 bit to 192 kHz/24 bit,
providing higher sound quality than music CDs.
Packed PCM signals are high sound quality compressed PCM signals that are decompressed with virtually no loss of data.
OFF
DVD audio
Audio recording format
Linear PCM
Video CD
Linear PCM
or
Packed PCM
Music CD
MP3 CD
WMA CD
44.1 kHz / 16 bit PCM
44.1 kHz / 16 bit PCM
192 kHz / 16 ~ 24 bit
176.4 kHz / 16 ~ 24 bit
MPEG 1
44.1 kHz / 16 bit Linear PCM
MP3 (MPEG-1 Audio Layer 3)
WMA (Windows Media Audio)
96 kHz / 16 ~ 24 bit
88.2 kHz / 16 ~ 24 bit
48 kHz / 16 ~ 24 bit
44.1 kHz / 16 ~ 24 bit
96 kHz / 16 ~ 24 bit
48 kHz / 16 ~ 24 bit
LPCM (44.1 kHz / 48 kHz)
48 kHz / 16 bit PCM
44.1 kHz / 16 bit PCM
48 kHz / 16 bit PCM
44.1 kHz / 16 bit PCM
48 kHz / 16 bit PCM
44.1 kHz / 16 bit PCM
48 kHz / 16 bit PCM
48 kHz / 16 bit PCM
ON
DVD video
44.1 kHz / 16 bit PCM
44.1 kHz / 16 bit PCM
No output data
No output data
No output data
No output data
No output data (*1)
No output data (*2)
No output data
No output data (*1)
44.1, 48 kHz / 16 bit PCM
44.1, 48 kHz / 16 bit PCM
Copy protection ON
88.2 kHz / 16 ~ 24 bit PCM
96 kHz / 16 ~ 24 bit PCM
88.2 kHz / 16 ~ 24 bit PCM
48 kHz / 16 ~ 24 bit PCM
96 kHz / 16 ~ 24 bit PCM
Copy protection OFF
44.1, 48 kHz / 16 bit PCM
44.1, 48 kHz / 16 bit PCM
Settings
NORMALAudio recording format
Dolby Digital
DTS
DIGITAL OUTPUT
2 channels PCM (48 kHz / 16 bit)
2 channels PCM (48 kHz / 16 bit)
PCM
DVD video
Dolby Digital bitstream
DTS bitstream
Settings
[ In the case of PCM output ]
48 kHz / 16 ~ 24 bit PCM
44.1 kHz / 16 ~ 24 bit PCM
96 kHz / 16 ~ 24 bit PCM
Super audio CD
DSD (DIRECT STREAM DIGITAL) No output data (*3) No output data (*3)
MPEG Audio 2 channels PCM (48 kHz / 16 bit)2 channels PCM (48 kHz / 16 bit)
16
(5) Connecting a basic 5.1-channel surround system
Analog 5.1-channel audio signals can be output from the DVD-A1XV.
The multi-channel audio signals recorded in packed PCM and the multi-channel Super audio CDs can be played when an AV amplifier
equipped with analog 5.1-channel audio inputs is connected.
DVD-A1XV
AV amplifier with 5.1-channel input terminals
To power outlet
SURROUND
SUBWOOFER
CENTER
FRONT
NOTES:
For multi-channel connections, set “AUDIO CHANNEL” under “AUDIO SETUP” at “SETUP” to “MULTI CHANNEL” and make
the “SPEAKER CONFIGURATION”, “CHANNEL LEVEL” and “DELAY TIME” settings. (See pages 46 ~ 51.)
•With the DVD-A1XV, we recommend turning the digital output off by using the “PURE DIRECT MODE” and only outputting
analog signals in order to keep interference from the digital output circuitry to a minimum and allow you to enjoy high-quality
multi-channel sound thanks to the high-bit, high sampling frequency. (See pages 57, 58.)
17
Set the “AUDIO SETUP” default setting as shown below. (See pages 46 ~ 51.)
“DIGITAL OUTPUT” “PCM”
“LPCM (44.1kHz/48kHz)” “ON”
Playing DVDs with incorrect settings may result noise that could damage your ears or the speakers.
(6) Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.)
89
B
Optical fiber cable
(commercially available)
75/ohms pin-plug cable
(commercially available)
DVD-A1XV
(7) Connecting to a Stereo Component
DVD-A1XV
Stereo component
NOTE:
When connecting to a 2-channel audio stereo device using the “5.1ch AUDIO OUT”, set “AUDIO CHANNEL” under “AUDIO
SETUP” on the “SETUP” to “2CH (SRS OFF)” or “2CH (SRS ON)” (See pages 46, 47.). For multi-channel sources, the signals
are down-mixed into two channels (analog).
(Only the front left and right channels are output for sources for which down-mixing is prohibited.)
Digital audio input connector
(COAXIAL)
Digital audio input connector
(OPTICAL)
NOTE:
Digital audio signals cannot be output when playing Super Audio CDs. Use analog connections to record Super Audio CDs.
(or)
18
DVD-A1XV
AV amplifier with DENON LINK input terminals
To power outlet
High quality digital sound with reduced digital signal transfer loss can be enjoyed by connecting a separately sold DENON LINK compatible
AV amplifier.
(8) DENON LINK connections
2 DENON LINK S.E. (2nd) settings:
If you connect the DENON LINK, set to “2nd”.
At “DIGITAL INTERFACE SETUP” under “SETUP”, set “DENON
LINK” to “2nd (AUTO)”, “2nd (1394)” or “2nd (ANALOG)”. (See
pages 38 ~ 41.)
2 DENON LINK Second Edition:
•With the DENON LINK, Second Edition (2nd), the audio signals are
transferred from the DVD player to the AV amplifier in digital form,
with the same quality as the signals recorded on the disc.
Digital transfer of the high quality multi-channel signals of DVD
audio is possible for all discs.
When the DENON LINK connection, could be output 176.4kHz,
192kHz/24bit 2ch sources or 96kHz/24bit 6ch sources.
2 Compatibility with previous models:
Digital audio signals output from a DENON LINK 2nd compatible
DVD player can only be played on a DENON LINK 2nd compatible
AV amplifier.
NOTES:
When DENON LINK is set, the down-mixed audio signals are output only from the left and right terminals and front left and front
right terminals. If you want to use the analog terminals, set to “DENON LINK” to “OFF”.
The DVD-A1XV’s speaker settings are invalidated when the DENON LINK connector is connected. (Make the speaker settings on
the AV amplifier to which the DVD-A1XV is connected.)
When the DENON LINK 2nd connection, Super Audio CD’s
signals are not output from the DENON LINK connector. Please use
the analog audio output terminals or IEEE1394 connectors.
DENON LINK
19
The simple connection of one IEEE 1394 cable permits high quality digital transfer of the following between devices having IEEE 1394
connectors: the audio of DVD video, DVD audio that up until now could only be connected by 5-conductor audio cable in an analog
connection, or Super Audio CD and other multi-channel audio. (unless DENON LINK connections)
(IEEE 1394 is an international standard established by the Institute of Electrical and Electronics Engineers, Inc. of the U.S.)
(9) IEEE 1394 connections
DVD-A1XV
AV amplifier with IEEE 1394 terminals
To power outlet
2 IEEE1394 settings:
For IEEE1394 connection, set “IEEE1394” under ”DIGITAL INTERFACE SETUP”at “SETUP” to ”ON”. (See pages 38 ~ 42.)
The DVD-A1XV’s IEEE 1394 mode is designed based on IEEE Std. 1394a-2000, Standard for a High Performance Serial Bus.
IEEE 1394 network
The following types of connections can be made between devices handling IEEE 1394 audio signals (A&M protocol):
q Daisy chain connections
Connect the sets in series using a single IEEE 1394 cord. Up to 15 sets can be connected.
w Tree (tower) connections
Connect the sets in parallel and in series using a single IEEE 1394 cord. Up to 63 sets can be connected.
Copyright Protection System
To play back through an IEEE 1394 connection the audio of Super Audio CD or DVD (except for discs that may be copied freely),
both the player and the amplifier are required to support a copyright protection system called DTCP (Digital Transmission Content
Protection). DTCP is copy protection technology comprising data encryption and the authentication of the remote device. This unit
supports DTCP. Please see the operation manual of your amplifier for information about your amplifier.
IEEE 1394
20
NOTES:
Please use the included IEEE 1394 cable. When using a cable other than the included IEEE 1394 cable, please use a 4-pin IEEE
1394 cable with a length of 3.5 m or less for S400 or higher.
The “IEEE 1394 audio signal (A&M protocol)” output from the DVD-A1XV’s IEEE 1394 connector not out video signals, please
connecting to a TV or Monitor with “component video output” or “S-video output” or “Video output”. (See pages 12 ~ 14.)
The “IEEE 1394 audio signal (A&M protocol)” output from the DVD-A1XV’s IEEE 1394 connector can only be received on AV
equipment equipped with an IEEE 1394 connector. Digital video (DV), personal computer, and i-Link (a Sony trademark) audio
signals cannot be sent and received. Incorrect connections could lead to malfunction. Connect as instructed in the other device’s
operating manual. Note that there is no guarantee of the operation of the connection even between devices supporting IEEE
1394. Whether or not data and control signals can be transmitted and received between devices supporting IEEE 1394 depends
on the functions of the respective devices.
When connecting using the IEEE 1394 connector, only connect one cord between the two devices. Never connect two cords
between the two devices (loop connection). If this is done, the signal output from one device will return to the same device,
resulting in malfunction.
No audio signals are output from the DVD-A1XV’s analog audio connectors, digital audio connectors, DENON LINK and HDMI
connector when IEEE 1394 is set.
To use these connectors, set the IEEE 1394 setting to “OFF”.
When the IEEE 1394 connector is connected, the DVD-A1XV’s speaker settings are disabled.
During playback of a device supporting IEEE 1394, please do not disconnect the IEEE 1394 cable of the other device, do not
connect a new device, and do not switch the power on or off. Doing so may interrupt the audio.
Among the devices that support IEEE 1394, when the power is in the standby mode or off, some devices are not able to relay
data. Please see the operation manual of the connected device that supports IEEE 1394. This unit is not able to relay the IEEE
1394 data while in the standby mode.
Devices that support IEEE 1394 have the maximum data transfer speed supported by that device marked in the vicinity of the
IEEE 1394 connector. The maximum transfer speed of IEEE 1394 is defined as approximately 100/200/400 Mbps*, with 200
Mbps items having S200 inscribed and 400 Mbps items having S400 inscribed. The maximum IEEE 1394 data transfer speed of
this unit is 400 Mbps. The actual transfer speed may be slower than 400 Mbps when S100 or S200 devices are connected, or
depending on the specifications of the device. Try to ensure that connections are made between devices that have the same
maximum data transfer speed.
* Mbps (Mega bps) is an abbreviation of “Mega bits per second” and indicates the volume of data that can be communicated in 1
second. At 400 Mbps, 400 Mega bits of data is transferred in 1 second.
A simple 1-cable connection (using a commercially available cable) with a device having an HDMI (High-Definition Multimedia Interface)
connector allows digital transfer of the digital images of and other sources, and the multi-channel sound of DVD video and DVD audio.
The DVD-A1XV is compatible with High-Definition Multimedia Interface (HDMI) Specification Version 1.1. (The multi-channel audio signals
of DVD audio discs can be transferred.) Use Type-A cables that have received HDMI certification for connections to the DVD-A1XV. For
stable signal transfer, we recommend using cables that are a maximum of 5 meters in length.
(10) HDMI connections
DVD-A1XV
HDMI Input connector
HDMI (TYPE A) cable (commercially available)
Monitor equipped with HDMI input connectors
21
Device to be connected
MULTI
(LPCM)
Video signals and Dolby Digital/DTS bitstream signals
converted into multi-channel PCM signals are output via the
HDMI connector. Make the speaker settings at “HDMI AUDIO
SETUP” at SETUP.
Video signals and 2-channel PCM audio signals are output via
the HDMI connector. When connecting to an AV amplifier with
DENON LINK/IEEE1394 or multi-channel analog audio, set to
“2CH”.
Video signals and Dolby Digital/DTS bitstream signals are
output via the HDMI connector.
Make the speaker settings on the connected AV amplifier, etc.
HDMI compatible monitor, projector etc. (2-channel
audio compatible or non-audio compatible)
HDMI compatible AV amplifier, monitor, etc. (with
Dolby Digital/DTS decoder)
HDMI compatible monitor, etc. (without Dolby
Digital/DTS decoder, with multi-channel audio
compatibility)
When set to DENON LINK and IEEE1394, switch the “HDMI AUDIO SETUP” setting to “2CH”.
When the setting for outputting audio signals from the IEEE1394 connector is made, no audio signals are output via the HDMI
connector.
When “MULTI (NORMAL)” “MULTI (LPCM)” is set, analog audio signals are only output from the L/R and FL/FR terminals.
(The signals from the FL/FR terminals are down-mixed audio signals.)
With Super Audio CDs, digital audio signals in areas except for the CD layer are not output via the HDMI connector. To play multi-
channel/stereo area signals, set the “HDMI AUDIO SETUP” setting to “2CH” and use the analog audio or IEEE1394.
2 CH
MULTI
(NORMAL)
NOTES:
The HDMI video and audio output are both turned off if the video output is set to “OFF” or if “ALL OFF” is set. (See Pages 57,
58.)
When selecting MULTI (NORMAL), the DVD-A1XV speaker settings under “AUDIO SETUP”become invalid.
Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however, the DVD-A1XV
cannot be controlled by another device via the HDMI connector.
When using display equipment that is not supported by the HDCP (content protection function), the image will not be output
properly.
The audio signals via the HDMI connector (including the sampling frequency and bit length) may be limited by the equipment that
is connected.
When using devices not compatible with HDMI specification Ver. 1.1, the audio signals of DVD audio discs copyright-protected
by CPPM are not output via the HDMI connector.
HDMI AUDIO SETUP HDMI audio
HDMI settings
When using HDMI connections, use the HDMI/DVI SELECT button on the main unit or the remote control unit to set “HDMI Y Cb Cr”
or “HDMI R G B”. (See page 63. By default, this setting is set to “HDMI/DVI OFF”.)
Video settings
Set to “480P/576P” upon shipment from the factory. Can be set manually to change the resolution. Use the HDMI/DVI FORMAT
button on the main unit or the remote control unit to set the resolution to 480P/576P, 720P or 1080i according to the connected
monitor.
Also, when set to “AUTO”, the resolution of the connected HDMI device is detected and the resolution is set automatically.
Audio settings
When connecting another device with the HDMI connector, make the “HDMI AUDIO SETUP” under “DIGITAL INTERFACE SETUP”
on the “SETUP” according to the specifications of the device or monitor to be connected. (See pages 38 ~ 41.)
22
DVI-D connector HDMI compatible monitor
Audio
Switches automatically to RGB.
Output via DVI-D connector in RGB format.
(11) DVI-D connections
Connection with equipment that has a DVI (Digital Visual Interface)-D connector permits the transfer of digital images.
When using display equipment that is not supported by the HDCP (content protection function), the image will not be output properly.
Make an audio connection also because an audio signal will not be output via the DVI-D connector.
Commercially DVI cables are available in 24-pin and 29-pin types. The DVD-A1XV supports the 24-pin DVI-D cable, but the 29-pin DVI
cable cannot be connected.
DVI-D Input connector
Monitor equipped with DVI-D input connectors
24P DVI-D cable (commercially available)
DVD-A1XV
HDMI connector DVI-D compatible monitor
Video
x
x
Copyright Protection System
To play the digital images and sounds of DVD video or DVD audio via an HDMI/DVI-D connection, it is necessary that both the player
and monitor (or AV amplifier) support a copyright protection system called HDCP (High-bandwidth Digital Content Protection
System). HDCP is copy protection technology that comprises data encryption and authentication of the partner equipment. The
DVD-A1XV supports HDCP. Please see the user’s manual of your monitor (or AV amplifier) for information about this.
DVI-D Settings
When using DVI-D connections, use the HDMI/DVI SELECT button on the main unit or the remote control unit to set “HDMI Y Cb Cr”
or “HDMI R G B”. (See “HDMI/DVI SELECT” on page 63. By default, this setting is set to “HDMI/DVI OFF”.)
Signals are output via the DVI-D connector in RGB format, regardless of whether “HDMI Y Cb Cr” or “HDMI R G B” is set.
When connecting both the HDMI and DVI-D connectors to monitors
Video signals with the same resolution are output via the HDMI and DVI-D connectors.
When monitors are connected to both the HDMI and DVI-D connectors in the AUTO mode, the resolution is set automatically
according to the connected devices. (See “HDMI/DVI FORMAT” on page 63.)
q When two HDMI devices are connected (an HDMI-DVI conversion cable is required)
The resolutions of the two HDMI devices are detected automatically, the lowest resolution is selected and the signals are output
with that resolution.
w When one HDMI and one DVI device are connected
The resolution is set to “480P/576P”.
e When two DVI devices are connected (an HDMI-DVI conversion cable is required)
The resolution is set to “480P/576P”.
It is also possible to set the resolution manually. Use the HDMI/DVI FORMAT button on the main unit or the remote control unit to
set the resolution to “480P/576P”, “720P” or “1080i” according to the resolution of the connected device.
Select the HDMI output format, either the Y Cb Cr or the RGB format. Use the HDMI/DVI SELECT button on the main unit or the
remote control unit to make the setting. The DVI-D output is set to the RGB format regardless of the HDMI setting. (See page 63.)
Connecting an HDMI-DVI conversion cable
When connecting to a monitor using a commercially available HDMI-DVI conversion cable, no audio signals are output.
When connected to a DVI-D compatible monitor, the output is automatically switched to RGB.
For stable signal transfer, we recommend using cables that are a maximum of 5 meters in length.
23
5
PART NAMES AND FUNCTIONS
(1) Front Panel
q
Power ON/STANDBY button
•Press once to set to the standby mode. The indicator
lights up in red.
•Press again to turn the power on. The indicator lights up in
green.
w
Power indicator
This indicator lights when the power is on and when the
power is in the standby mode.
Light green: Power is on
Light red : Power is in the standby mode
e
Power switch
•Press once to turn the power on.
•Press again to set to the “OFF” position and turn the
power off.
r
Display
Information on the disc that is currently playing is shown
on the display. (See page 26.)
t
Remote control sensor
y
SELECT of HDMI/DVI button
•Press this to set the video signal output via the HDMI/DVI
connector. (See page 63.)
u
FORMAT of HDMI/DVI button
•Press this to set the video signal format via the HDMI
connector or the DVI connector. (See page 63.)
480P/576P 720P 1080i AUTO
HDMI Y Cb Cr HDMI RGB
HDMI/DVI OFF
i
VIDEO MODE button
Use this to instantly change the adjustment mode of the
stored video signals. (See page 63.)
The setting values of PICTURE MODE and SQUEEZE
MODE will not be stored.
The unit will return to the stored setting values when the
power is switched off.
PICTURE MODE
TV SYSTEM
SQUEEZE MODE
No effective for interlaced image.
AUDIO ADJUST
o
Select the playback area/layer of SUPER AUDIO
CD (SUPER AUDIO CD SETUP)
Switch the area /layer of the Super audio CDs played with
priory.
MULTI.......When playing Super audio CDs, the Multi
channel area is played with priory
STEREO....When playing Super audio CDs, the stereo
channel area is played with priority.
•CD.............When playing Super audio CDs, the CDs layer
is played with priority.
MULTI STEREO CD
TIME:0msecTIME:–30msec TIME:+200msec
OFF ON AUTO
INTERLACEDPROGRESSIVE
HDMI/DVIOTHERS
STD M1 M2 M3 M4 M5
24
!0
PURE DIRECT SELECT button
•Press to switch the modes with the specific video signals,
digital audio signals and indicate in display on and off. (See
pages 57, 58.)
!1
DVD AUDIO/VIDEO indicator
This indicator lights when playing the DVD audio or DVD
video.
!2
Super Audio CD indicator
This indicator lights when playing the Super Audio CD.
!3
Disc tray
Load discs here. (See page 30.)
•Press the OPEN/CLOSE button
!6 to open and close the
disc tray.
The disc tray is also closed when the PLAY button
!8 is
pressed.
!4
DENON LINK indicator
This indicator lights when the audio signals are transferred
by DENON LINK connections.
!5
Advanced AL24 Processing indicator
This indicator lights when the audio signals of a DVD, etc.,
are being processed digitally with the Advanced AL24
processing.
NORMAL MODE 1 MODE 2 ALL OFF
!6
OPEN/CLOSE button (5)
•Press this to open and close the disc tray.
(See pages 30, 66.)
!7
STILL/PAUSE button (3)
•Press this to pause images or music or to play images
frame by frame. (See page 68, 69.)
!8
PLAY button (1)
•Press this to play the disc. (See page 67.)
!9
STOP button (2)
•Press this to stop the disc. (See page 68.)
@0
Skip button (8)
•Press this to move back to the beginning of the current
track (or chapter).
•Press again to move back to the beginning to the previous
track (or chapter). (See page 69.)
@1
Skip button (9)
•Press this to move ahead to the beginning of the next
track (or chapter). (See page 69.)
@2
Slow/Search buttons (6 7)
•Press this to set the slow or search play mode.
(See pages 68, 69.)
6: search in the reverse direction.
7: search in the forward direction.
25
(2) Rear Panel
@3
21-pin SCART terminal (AV1)
Connect using a 21-pin SCART cable (available in stores).
@4
Audio output connectors (2ch AUDIO OUT)
Connect using the included audio cord.
Multi-channel sound is down-mixed and output.
@5
Component video output connectors
(COMPONENT VIDEO OUT)
Connect using video cords (available in stores).
@6
S-Video output connector (S-VIDEO OUT)
Connect using an S-Video connection cord (available in
stores).
@7
Video output connector (VIDEO OUT)
Connect using the included video cord.
@8
HDMI output connector (HDMI)
Connect using HDMI (TYPE A) connection cord (available
in stores).
@9
DVI-D-Video output connector (DVI-D OUT)
Connect using 24P DVI-D connection cord (available in
stores).
#0
Audio output connectors (5.1ch AUDIO OUT)
Connect using an audio cord. Connect a commercially
available pin-plug cord.
#1
Digital connectors (IEEE 1394)
This is for connection of a separately sold AV amplifier
equipped with a IEEE 1394 connector.
Use it to achieve high quality digital sound with low data
loss.
#2
Control connector (RS-232C)
This is a terminal for future system expansion.
#3
Control input connector (ROOM TO ROOM IN)
This is the input connector for wired remote control.
Consult your DENON dealer if you wish to use this
connector.
#4
Control output connector (ROOM TO ROOM OUT)
This is the output connector for wired remote control.
Consult your DENON dealer if you wish to use this
connector.
#5
Digital output connector (DENON LINK)
This is for connection of a separately sold AV amplifier
equipped with a DENON LINK connector.
Use it to achieve high quality digital sound with low data
loss.
#6
Digital audio output connector (OPTICAL)
Connect using an optical fiber cable (available in stores).
Digital data is output from this connector.
#7
Digital audio output connector (COAXIAL)
Connect using an digital audio cord. Connect a
commercially available 75 /ohms pin-plug cord.
Digital data is output from this connector.
#8
Power input (AC IN)
Connect to AC power supply using the included power
supply cord.
26
(3) Display
q
Lights to indicate the currently playing disc.
w
Lights in the repeat play mode.
e
These light to indicate the names of sections of the disc
being played.
r
Lights during playback of multiple angles disc.
t
Lights when the audio signals can be down-mixed.
y
Lights in the programmed play mode.
u
Lights in the random play mode.
i
There light to indicate the time display mode.
o
Lights when HDCD is playing.
!0
Lights when SRS TruSurround is on.
!1
Lights to indicate the currently playing audio format.
!2
Lights to indicate the currently playing audio.
L:Front left channel
C:Center channel
R:Front right channel
SL : Surround left channel
S:Mono surround channel
SR : Surround right channel
LFE : Low frequency effect
!3
Lights to indicate the currently playing video type.
F :Film source
V:Video source
!4
Lights when progressive video signals are being output.
!5
Displays the title , track number and elapsed time during
playback.
!6
Lights when the audio signals is output from IEEE1394
terminals.
!7
Lights when the video (or audio) signals is output via HDMI
or DVI connectors.
(Flashes while the connection to the HDMI/DVI-D connector
is being checked.)
27
6
REMOTE CONTROL UNIT
2 The DVD-A1XV can be controlled from a distance using the included remote control unit (RC-993).
(1) Inserting Batteries
q Remove the remote control unit’s rear cover.
w Place three R6P/AA batteries in the battery compartment in
the direction indicated by the marks.
e Close the rear cover.
Cautions On Batteries
Use R6P/AA batteries in this remote control unit.
Replace the batteries with new ones approximately once
a year, though this depends on the frequency with which
the remote control unit is used.
If the remote control unit does not operate from close to
the main unit, replace the batteries with new ones, even
if less than a year has passed.
The included battery is only for verifying operation.
Replace it with a new battery as soon as possible.
•When inserting the batteries, be careful to do so in the
proper direction, following the < and > marks in the
remote control unit’s battery compartment.
•To prevent damage or battery fluid leakage:
Do not use a new battery with an old one.
Do not use two different types of batteries.
Do not short-circuit, disassemble, heat or dispose of
batteries in flames.
Remove the batteries when not planning to use the
remote control unit for a long period of time.
If the batteries should leak, carefully wipe off the fluid
from the inside of the battery compartment, then insert
new batteries.
(2) Using the Remote Control Unit
When operating the remote control unit, point it at the remote
control sensor as shown on the diagram.
The remote control unit can be used from a direct distance of
approximately 7 meters. This distance will be shorter, however,
if there are obstacles in the way or if the remote control unit is
not pointed directly at the remote control sensor.
The remote control unit can be operated at a horizontal angle of
up to 30° with respect to the remote control sensor.
NOTES:
It may be difficult to operate the remote control unit if the
remote control sensor is exposed to direct sunlight or
strong artificial light.
Do not press buttons on the main unit and on the remote
control unit at the same time. Doing so will result in
malfunction.
Approx. 7 meters
30°
30°
28
(3) Names and Functions of Remote Control Unit Buttons
2 Button not explained here function in the same way as the corresponding buttons on the main unit.
q
POWER ON/POWER OFF buttons
•Press this to switch the power between on and standby.
w
HDMI/DVI SELECT/FORMAT buttons
Use these to select to use HDMI connector or DVI
connector, and the format of video signals (480P/576P,
720P, 1080i, AUTO).
e
Number buttons
Use these to input numbers.
Use the +10 button to input numbers of 10 or over.
Example : To input 25
r
LIGHT button
•Press this to light the all buttons.
Press again this to put out light.
t
ANGLE button
•Press this to switch the angle.
y
TOP MENU button
The top menu stored on the disc is displayed.
u
Cursor buttons/ENTER button
Use the and ª cursor buttons to select in the vertical
direction.
Use the
0 and 1 cursor buttons to select in the horizontal
direction.
Press the ENTER button to select the item selected with
the cursor buttons.
i
MENU button
The DVD menu stored on the disc is displayed.
o
STOP button (2)
!0
STILL/PAUSE button (3)
!1
SKIP buttons
!2
REPEAT button
•Press this to play tracks repeatedly.
!3
A-B repeat button (A-B)
Use this to repeat sections between two specific points.
!4
RANDOM button
•Press this to play the tracks on the video or music CD in
random order.
!5
MARKER button
•Press this to mark places you want to see again.
!6
SETUP button
•Press this to display the default setting screen.
!7
PICTURE ADJUST button
•Press this to adjust the picture quality to suit your tastes.
RC-993
MARKERRANDOM DIMMERZOOM
PICT ADJ.SET UP MEMORY
A-BREPEAT
SELECT
SELECT FORMAT NTSC/PAL
AUDIOSUBTITLE
ANGLE
HDMI/DVI OPEN/
SUPER AUDIO
CLOSE
CD SETUP
PROGRAM
/DIRECT
CLEAR
CALLSEARCH MODE
PAGE
PICTURE
ADJUST
PURE DIRECT
DISPLAY
TOP MENU
RETURN
MENU
SKIP
SLOW/SEARCH
PLAY
STILL/PAUSE
STOP
BACK LIGHT
POWER OFF POWER ON
q
w
e
r
u
i
o
!2
!3
!5
!7
!4
!6
!1
!0
y
t
29
!8
OPEN/CLOSE button
!9
NTSC/PAL button
Use this to switch the set’s video output format
(NTSC/PAL).
@0
SUPER AUDIO CD SETUP button
@1
PROGRAM/DIRECT button
@2
CLEAR button
•Press this to clear numbers that you have input.
@3
CALL button
•Press this to check the program contents.
@4
SEARCH MODE button
•Press this to change the search mode to search for groups
or titles, tracks or chapters when selecting sections of
discs directly using the number buttons.
@5
AUDIO button
For DVDs, press this to switch the audio language. For
video CDs, press this to switch the channel between
“STEREO”, “MONO LEFT” and “MONO RIGHT”.
@6
SUBTITLE button
•Press this to switch the DVD’s subtitle language.
@7
DISPLAY button
•Press this to display the ON-SCREEN.
@8
RETURN button
•Press this to return to the previous menu screen.
@9
PLAY button (1)
#0
SLOW/SEARCH buttons
#1
PAGE –/PAGE + buttons
Use these to selected the desired still picture on DVD
audio discs containing browseable still pictures.
#2
ZOOM button
•Press this to enlarge the image.
#3
DIMMER button
Use this to adjust the brightness of the main unit’s display.
Can be switched in 4 steps, from all off to always on.
#4
PURE DIRECT MEMORY/SELECT buttons
Use these to make and select that various setting to
achieve higher quality sound.
RC-993
MARKERRANDOM DIMMERZOOM
PICT ADJ.SET UP MEMORY
A-BREPEAT
SELECT
SELECT FORMAT NTSC/PAL
AUDIOSUBTITLE
ANGLE
HDMI/DVI OPEN/
SUPER AUDIO
CLOSE
CD SETUP
PROGRAM
/DIRECT
CLEAR
CALLSEARCH MODE
PAGE
PICTURE
ADJUST
PURE DIRECT
DISPLAY
TOP MENU
RETURN
MENU
SKIP
SLOW/SEARCH
PLAY
STILL/PAUSE
STOP
BACK LIGHT
POWER OFF POWER ON
@1
@2
@3
@5
@7
@8
@9
#0
#1
#3
#2
#4
@0
@4
@6
!8
!9
30
7
LOADING DISCS
2 Set discs in the disc tray with the labeled (printed) side facing up.
Inner disc guide
(8 cm disc)
Disc tray
NOTE:
Do not move the DVD-A1XV while a disc is playing. Doing
so may scratch the disc.
(1) Opening and Closing the Disc Tray
q Turn on the power.
w Press the OPEN/CLOSE button.
Disc tray
OPEN/CLOSE button
NOTES:
Be sure to turn on the power before opening and closing
the disc tray.
Do not strike on the button with a pencil, etc.
(2) Loading Discs
Pick up the disc carefully so as not to touch the signal surface
and hold it with the labeled side facing up.
•With the disc tray fully open, set the disc in the disc tray.
Set 12 cm discs in the outer disc guide (Figure 1), 8 cm discs in
the inner disc guide (Figure 2).
•Press the OPEN/CLOSE button. The disc is automatically
loaded.
The disc tray can also be closed automatically to load the disc
by pressing the PLAY button.
Figure 1
Outer disc guide
12 cm disc
Figure 2
Inner disc guide
8 cm disc
NOTES:
If a foreign object is caught in the disc tray during closing,
simply press the OPEN/CLOSE button again and the tray
will open.
Do not press the disc tray in by hand when the power is
off. Doing so will damage it.
Do not place foreign objects in the disc tray. Doing so will
damage it.
Outer disc guide
(12 cm disc)
Power switch
31
8
CHANGING THE DEFAULT SETTINGS
SELECT FORMAT NTSC/PAL
AUDIOSUBTITLE
ANGLE
H
D
M
I/D
V
I
O
PE
N
/
S
U
P
E
R
A
U
D
IO
C
LO
S
E
C
D
S
E
T
U
P
P
R
O
G
R
A
M
/D
IR
E
C
T
C
L
EA
R
C
A
L
L
SE
A
R
C
H
M
O
D
E
D
IS
P
L
A
Y
TO
P
M
E
N
U
R
ET
U
R
N
M
EN
U
B
A
C
K
LIG
H
T
P
O
W
ER
O
FF
P
O
W
E
R
O
N
PICT ADJ.SET UP MEMORY
SELECT
P
IC
T
U
R
E
A
D
J
U
S
T
P
U
R
E D
IR
E
C
T
2
1
3
1
Turn on the power.
•Press the power button, the power indicator lights green and the
power turns on.
When pressed again, the power turns off and indicator is off.
In the standby mode (the power indicator lights red), press the
ON/STANDBY button on the main unit or POWER ON button on the
remote control unit (RC-993).
ON / STANDBYON / STANDBY
Main unit
2 Make the initial settings to suit your usage conditions before starting playback.
The initial settings are retained until they are next changed, even if the power is turned off.
PLAY STOP
OPEN/ CLOSE
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-A1XV
STILL / PAUSE
PURE
DIRECT
SELECT
VIDEO MODE
PUSH ENTER
FORMATSELECT
HDMI / DVI SUPER
AUDIO CD
SET UP
ON / STANDBY
1 1
(Green)
ON / STANDBYON / STANDBY
Main unit
Remote control unit
POWER ON
(Red)
32
Use the
0
and
1
cursor buttons to select the desired setting item, then
press the ENTER button.
Select “LANGUAGE SETUP”. (See pages 35 ~ 37.)
Select “DIGITAL INTERFACE SETUP”. (See pages 38 ~ 42.)
Select “VIDEO SETUP”. (See pages 43 ~ 45.)
Select “AUDIO SETUP”. (See pages 46 ~ 51.)
Select “RATINGS”. (See pages 52, 53.)
Select “OTHER SETUP”. (See pages 54 ~ 56.)
Remote control unit
To exit the setup mode
Use the
ª
cursor button to select “EXIT SETUP”, then press the ENTER button. It is also possible to quit by pressing the SETUP
button on the remote control unit.
3
Remote control unit
2
In the stop mode, press the SETUP button.
The setup (default settings) screen appears.
NOTE: For some menus, the initial values can be changed during
playback.
LANGUAGE SETUP
Use this to set the language to be used when playing the disc. If the set
language is not offered on that disc, the discs default language is set.
And use this to set the language for the default setting screen and
messages displayed on the TV screen (“PLAY”, etc.).
DIGITAL INTERFACE SETUP
Use this to set the output of DVI, HDMI, DENON LINK and IEEE1394
terminals.
VIDEO SETUP
Use this to set the DVD-A1XV’s screen mode.
AUDIO SETUP
Use this to set the DVD-A1XV’s audio output mode.
RATINGS
Use this to disable playback of adult DVDs so that children cannot watch
them. Note that playback of adult DVDs cannot be disabled if the rating
level is not recorded on the DVD.
OTHER SETUP
These include special settings such as CAPTIONS, WALL PAPER , etc,.
LANGUAGE SETUP
SELECT :DECISION:ENTER BUTTON
DIALOG
DISC MENUS
OSD LANGUAGE
EXIT SETUP
SUBT I TLE
ENGL I SH
ENGL I SH
ENGL I SH
ENGL I SH
SETUP
Remote control unit
33
Setup items for use
Bold characters indicate factory defaults.
The display depends on the connected device.
34
Bold characters indicate factory defaults.
35
When “LANGUAGE SETUP” is selected
1
2
3
See pages 31, 32.
Use the
and
ª
cursor buttons to select the desired setting, then press
the ENTER button.
DIALOG
Use this to set the language of the sound output from the speakers.
SUBTITLE
Use this to set the language of the subtitles displayed on the TV.
DISC MENUS
Use this to set the language of the menus recorded on the disc (top
menu, etc.).
OSD LANGUAGE
Use this to set the language for the default setting screen and
messages displayed on the TV screen (“PLAY”,etc.)
Use the
and
ª
cursor buttons to select the desired setting, then press
the ENTER button.
q
When “DIALOG” is selected:
ENGLISH (Factory default)
Select this when you want to play the DVD with the sound in English.
FRENCH
Select this when you want to play the DVD with the sound in French.
SPANISH
Select this when you want to play the DVD with the sound in Spanish.
GERMAN
Select this when you want to play the DVD with the sound in German.
ITALIAN
Select this when you want to play the DVD with the sound in Italian.
OTHERS
Use the number buttons to input the language number.
(See “Language code list” on page 37.)
LANGUAGE SETUP
DECISION:ENTER BUTTON
DIALOG
DISC MENUS
EXIT SETUP
SUBT I TLE
OSD LANGUAGE
SELECT :
ENGL I SH
ENGL I SH
ENGL I SH
ENGL I SH
LANGUAGE SETUP
DECISION:ENTER BUTTON
DIALOG
DISC MENUS
EXIT SETUP
SUBT I TLE
ENGL I SH
FRENCH
SPANISH
ITALIAN
GERMAN
OTHERS
OSD LANGUAGE
SELECT :
Remote control unit Remote control unit
Remote control unit Remote control unit
36
3
w
When “SUBTITLE” is selected:
OFF
Select this if you do not want to display the subtitles. (For some discs
it is not possible to turn off the subtitle display.)
ENGLISH (Factory default)
Select this when you want to play the DVD with the subtitles in
English.
FRENCH
Select this when you want to play the DVD with the subtitles in
French.
SPANISH
Select this when you want to play the DVD with the subtitles in
Spanish.
GERMAN
Select this when you want to play the DVD with the subtitles in
German.
ITALIAN
Select this when you want to play the DVD with the subtitles in
Italian.
OTHERS
Use the number buttons to input the language number.
(See “Language code list” on page 37.)
e
When “DISC MENUS” is selected:
ENGLISH (Factory default)
Select this when you want to display the menus in English.
FRENCH
Select this when you want to display the menus in French.
SPANISH
Select this when you want to display the menus in Spanish.
GERMAN
Select this when you want to display the menus in German.
ITALIAN
Select this when you want to display the menus in Italian.
OTHERS
Use the number buttons to input the language number.
(See “Language code list” on page 37.)
r
When “OSD LANGUAGE” is selected:
ENGLISH (Factory default)
Select this to set the OSD language to English.
FRANÇAIS
Select this to set the OSD language to French.
ESPAÑOL
Select this to set the OSD language to Spanish.
DEUTSCH
Select this to set the OSD language to German.
LANGUAGE SETUP
DECISION:ENTER BUTTON
DIALOG
DISC MENUS
EXIT SETUP
SUBT I TLE
ENGL I SH
FRENCH
SPANISH
ITALIAN
GERMAN
OTHERS
OFF
OSD LANGUAGE
SELECT :
LANGUAGE SETUP
DECISION:ENTER BUTTON
DIALOG
DISC MENUS
EXIT SETUP
SUBT I TLE
ENGL I SH
FRENCH
SPANISH
ITALIAN
GERMAN
OTHERS
SELECT :
OSD LANGUAGE
To exit the setup mode
Use the
ª
cursor button to select “EXIT SETUP”, then press the ENTER button. It is also possible to quit by pressing the SETUP
button on the remote control unit.
LANGUAGE SETUP
DECISION:ENTER BUTTON
DIALOG
DISC MENUS
EXIT SETUP
SUBT I TLE
ENGL I SH
FRANÇAIS
ESPAÑOL
DEUTSCH
SELECT :
OSD LANGUAGE
Remote control unit Remote control unit
37
Language code list
Code
6565
6566
6570
6577
6582
6583
6588
6590
6665
6669
6671
6672
6678
6679
6682
6765
6779
6783
6789
6865
6869
6890
6976
6978
6979
6983
6984
6985
7065
7073
7074
Code
7079
7082
7089
7165
7168
7176
7178
7185
7265
7273
7282
7285
7289
7365
7378
7383
7384
7387
7465
7473
7487
7565
7575
7576
7577
7578
7579
7583
7585
7589
7665
Code
7678
7679
7684
7686
7771
7773
7775
7776
7778
7779
7782
7783
7784
7789
7865
7869
7876
7879
7982
8065
8076
8083
8084
8185
8277
8279
8285
8365
8368
8372
8373
Language
Afar
Abkhazian
Afrikaans
Ameharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bengali; Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Language
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Indonesian
Icelandic
Italian
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Language
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonish
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Oriya
Panjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Romanian
Russian
Sanskrit
Sindhi
Serbo-Croatian
Singhalese
Code
8375
8376
8377
8378
8379
8381
8382
8385
8386
8387
8465
8469
8471
8472
8473
8475
8476
8479
8482
8484
8487
8575
8582
8590
8673
8679
8779
8872
8979
9072
9085
Language
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Tonga
Turkish
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Chinese
Zulu
38
When “DIGITAL INTERFACE SETUP” is selected
1
2
See pages 31, 32.
Use the
and
ª
cursor buttons to select the desired setting, then press
the ENTER button.
HDMI/DVI PICTURE ADJUST
Switches the digital RGB video range (data range) via the HDMI and the
DVI-D connectors.
HDMI AUDIO SETUP
Use this to adjust for the audio signals via the HDMI connector.
HDMI AUTO FORMAT
Set the “AUTO” function selected with the HDMI/DVI FORMAT button
on the main unit or the remote control unit.
DENON LINK
Use this to output digital signals from the DENON LINK terminal.
IEEE1394
Use this to output digital signals from the IEEE1394 terminal.
PANE L RES .
NORMAL
2CH
DIGITAL INTERFACE SETUP
HDMI/DVI PIC TURE ADJUST
HDMI AUDIO SETUP
HDMI AUTO FORMAT
EXIT SETUP
OFF
OFF
DENON L INK
IEEE1394
DECISION:ENTER BUTTONSELECT :
3
Use the
and
ª
cursor buttons to select the desired setting, then press
the ENTER button.
q
When “HDMI/DVI PICTURE ADJUST” is selected:
NORMAL (Factory default)
Signals are output via the HDMI and the DVI-D connectors with a
digital RGB video range (data range) of 16 (black) to 235 (white).
ENHANCED
Signals are output via the HDMI and the DVI-D connectors with a
digital RGB video range (data range) of 0 (black) to 255 (white).
When the HDMI and the DVI-D connectors are connected , the black
may seem to stand out, depending on the TV or the Monitor. In this
case, set this to “ENHANCED”.
When select “HDMI Y Cb Cr” under “HDMI/DVI SELECT”, will have
no effect. (See page 63.)
DECISION:ENTER BUTTONSELECT :
DIGITAL INTERFACE SETUP
HDMI/DVI PIC TURE ADJUST
NORMAL
ENHANCED
HDMI AUDIO SETUP
HDMI AUTO FORMAT
EXIT SETUP
DENON LINK
IEEE1394
Remote control unit Remote control unit
Remote control unit Remote control unit
39
3
w
When “HDMI AUDIO SETUP” is selected:
2CH (Factory default)
The audio signals are output via the HDMI connector with a down-
mixed to 2 channel.
MULTI (NORMAL)
The multi-channel audio signals are output via the HDMI connector
with a bitstream.
MULTI (LPCM)
The multi-channel audio signals are output via the HDMI connector
with a linear PCM.
B
When “MULTI (LPCM)” is selected, use the
and
ª
cursor
buttons to select the item to be set, then press the ENTER button.
SPEAKER CONFIGURATION
Use this to select the types of the different speakers.
CHANNEL LEVEL
Use this to adjust the output level of the different speakers.
DELAY TIME
Use this to set the distance from the different speakers to the
listening position.
To exit the HDMI SPEAKER SETUP mode.
Use the
ª
cursor button to select “DIGITAL INTERFACE SETUP”
then press ENTER button.
B
When “SPEAKER CONFIGURATION” is selected, use the
and
ª
cursor buttons to select the speaker to be set then press the
ENTER button.
The type of speaker used for the front speakers, center speaker,
subwoofer and surround speakers can be set. Use the and ª
cursor buttons to select the speaker type, then press the
ENTER button.
LARGE
Select this when a large speaker is connected.
SMALL
Select this when a small speaker is connected.
When “CROSSOVER” is selected:
40 Hz, 60 Hz, 80 Hz (Factory default), 100 Hz, 120 Hz, set the
frequency of cross over.
Press the RETURN button to return to the “HDMI SPEAKER
SETUP” menu.
HDMI SPEAKER SETUP
SPEAKER CONF I GURAT I ON
CHANNE L L EVEL
DELAY TI
M
E
DIGITAL INTERFACE SETUP
DECISION:ENTER BUTTONSELECT :
HDMI SPEAKER SETUP
SPEAKER CONF I GURAT I ON
FRONT SP
CENTER SP
SUB
W
OOF ER
SURROUND SP
CROSSOVER
LARGE
LARGE
YES
LARGE
80Hz
DECISION:ENTER BUTTONSELECT :
The display depends on the connected device.
(Indicates whether or not speakers are
connected)
Remote control unit Remote control unit
DECISION:ENTER BUTTONSELECT :
DIGITAL INTERFACE SETUP
HDMI/DVI PIC TURE ADJUST
2CH
MULTI(NORMAL)
MULTI(LPCM)
HDMI AUDIO SETUP
HDMI AUTO FORMAT
EXIT SETUP
DENON LINK
IEEE1394
40
3
B
When “CHANNEL LEVEL” is selected, use the
and
ª
cursor
buttons to select the speaker to be adjusted, then use the
0
and
1
cursor buttons to set the level.
TEST TONE
Use the
0 and 1 cursor buttons to select auto or manual.
Adjust so that the volume of the test tones output from the
different speakers sounds the same.
The volume level output from the front speakers (left and right
channels), center speaker, surround speakers (left and right
channels) and subwoofer can be adjusted.
The volume level can be adjusted between 0 and –10 dB in
steps of 1 dB.
Press the RETURN button to return to the “HDMI SPEAKER
SETUP” menu.
B
When “DELAY TIME” is selected:
With 5.1-channel surround sound, ideally the distance between
the listening position and all the speakers aside from the
subwoofer should be the same. The delay time setting can be
used to make the sound from the different speakers reach the
listening position at the same time.
Use the
and
ª
cursor buttons to select the setting item, then
press the ENTER button.
When “DISTANCE” is selected:
METERS (when the
0 cursor button is pressed):
The unit of distance is set to meters (“m”).
FEET (when the
1 cursor button is pressed):
The unit of distance is set to feet (“ft”).
When “FRONT LCH”, “FRONT RCH”, “CENTER”,
“SURROUND LCH”, ”SURROUND RCH”, “SUBWOOFER” is
selected:
Use the
0 and 1 cursor buttons to set the distance from the
listening position to the different speakers.
The distance can be set within the range of 0 to 18 meters
(60 feet).
The maximum difference in speaker distance for which
adjustment is possible is 4.5 meters (15 feet).
HDMI SPEAKER SETUP
DELAY TIME
DECISION:ENTER BUTTONSELECT :
DISTANCE
FRONT LCH
CENTER
FRONT RCH
SURROUND RCH
SURROUND L CH
SUB
W
OOF ER
DEFAULT
ON
METERS
3.6 m
3.6 m
3.6 m
3.6 m
3.0 m
3.0 m
HDMI SPEAKER SETUP
DELAY TIME
DECISION:ENTER BUTTONSELECT :
DISTANCE
FRONT LCH
CENTER
FRONT RCH
SURROUND RCH
SURROUND L CH
SUB
W
OOF ER
DEFAULT
METERS
ON
3.6 m
3.6 m
3.6 m
3.6 m
3.0 m
3.0 m
HDMI SPEAKER SETUP
DELAY TIME
DECISION:ENTER BUTTONSELECT :
DISTANCE
FRONT LCH
CENTER
FRONT RCH
SURROUND RCH
SURROUND L CH
SUB
W
OOF ER
DEFAULT
ON
METERS
3.6 m
3.6 m
3.6 m
3.6 m
3.0 m
3.0 m
Remote control unit Remote control unit
HDMI SPEAKER SETUP
CHANNEL LEVEL
DECISION:ENTER BUTTONSELECT :
TEST TONE
FRONT LCH
CENTER
FRONT RCH
SURROUND RCH
SURROUND LCH
SUB
W
OOF ER
OFF
0dB
0dB
0dB
0dB
0dB
0dB
41
3
•When “DEFAULT” is selected:
When “DEFAULT” is selected and the ENTER button is
pressed, all the items are restored to their factory default
settings.
When digital connections are made with an AV amplifier, make
the speaker settings on the AV amplifier.
For DVD audio discs, the disc’s settings are given priority, so the
sound may not be produced as set with the above speaker mode
setting.
Press the RETURN button to return to the “HDMI SPEAKER
SETUP” menu.
When the HDMI connection cable is disconnected, the “SPEAKER
CONFIGURATION”, “CHANNEL LEVEL”, and “DELAY TIME”
settings under “HDMI SPEAKER SETUP” are stored.
e
When “HDMI AUTO FORMAT” is selected:
PANEL RES. (Factory default)
The HDMI output format is selected automatically according to the
panel resolution of the connected HDMI device.
MAX RES.
The HDMI output format is selected automatically according to the
maximum resolution of the connected HDMI device.
When connected with a DVI device, the HDMI output format is fixed
at 480P/576P.
r
When “DENON LINK” is selected:
OFF (Factory default)
No digital audio signals are output from the DENON LINK connector.
Set to “OFF” when not using DENON LINK connections.
2nd (AUTO)
Signals are output from the DENON LINK connector in “2nd” format.
When playing the multi/stereo area of super audio CDs, the
connection to the IEEE1394 connector is detected automatically, and
if a device is connected, the signals are output from the IEEE1394
connector. If no device is connected to the IEEE1394 connector, the
signals are output from the analog audio connectors.
2nd (1394)
Signals are output from the DENON LINK connector in “2nd” format.
When playing the multi/stereo area of super audio CDs, the signals
are output from the IEEE1394 connector. No signals are output from
the analog audio connectors.
2nd (ANALOG)
Signals are output from the DENON LINK connector in “2nd” format.
When playing super audio CDs, the signals are output from the
analog audio connectors. (No signals are output from the IEEE1394
connector, even if a device is connected.) Select this if your AV
amplifier does not have an IEEE1394 connector.
When the DENON LINK 2nd connection, Super audio CD’s signals
are not output from the DENON LINK connector. Please use the
analog output terminals or the IEEE1394 connection.
When the DENON LINK is set, the down mixed audio signals are
output only from the Left and Right and Front Left and Front Right
terminals.
DECISION:ENTER BUTTONSELECT :
DIGITAL INTERFACE SETUP
HDMI/DVI PIC TURE ADJUST
HDMI AUDIO SETUP
DENON LINK
EXIT SETUP
OFF
2nd(AUTO)
2nd(1394)
2nd(ANALOG)
HDMI AUTO FORMAT
DENON LINK
IEEE1394
DECISION:ENTER BUTTONSELECT :
DIGITAL INTERFACE SETUP
HDMI/DVI PIC TURE ADJUST
HDMI AUDIO SETUP
EXIT SETUP
PANEL RES.
MAX RES.
HDMI AUTO FORMAT
DENON LINK
IEEE1394
Remote control unit Remote control unit
HDMI SPEAKER SETUP
DELAY TIME
DECISION:ENTER BUTTONSELECT :
DISTANCE
FRONT LCH
CENTER
FRONT RCH
SURROUND RCH
SURROUND L CH
SUB
W
OOF ER
DEFAULT
ON
METERS
3.6 m
3.6 m
3.6 m
3.6 m
3.0 m
3.0 m
42
3
I EEE1394 SETUP
I EEE1394 SETUP
AUTO PL AY
AUD IO F ORMAT
OFF
ON
DECISION:ENTER BUTTON
SELECT :
I EEE1394 SETUP
I EEE1394 SETUP
AUTO PL AY
AUD IO F ORMAT
FORMAT1
FORMAT2
DECISION:ENTER BUTTON
SELECT :
t
When “IEEE1394” is selected:
OFF (Factory default)
Digital audio signals are not output from the IEEE1394 terminal.
ON
Digital audio signals are output from the IEEE1394 terminal.
No audio signals are output from the analog connectors when
IEEE1394 is set.
B
When “ON” is selected:
This will lead to the “AUTO PLAY”, and “AUDIO FORMAT”
setting screens. Select the item to be set using the (
,
ª
) cursor
buttons and press the ENTER button.
AUTO PLAY
Set this when automatically playing this unit from another device,
under circumstances in which this unit is used in conjunction with
a DENON device that supports IEEE1394.
AUDIO FORMAT
Set this format of audio signals from IEEE1394 connector.
B
When “AUTO PLAY” is selected:
OFF (Factory default)
Set this when you do not wish to control the operation of this unit
from another device.
ON
Set this when you wish to control the operation of this unit from
another device.
B
When “AUDIO FORMAT” is selected:
FORMAT1 (Factory default)
Set this when you conjunction with a DENON device.
FORMAT2
This is a mode for future system expansion.
[IEEE1394 indicator in the display]
When “IEEE1394” set to “ON”,
this indicator lights as bellow.
flashing .......................self check of IEEE1394 connections.
light.............................IEEE1394 connection is OK.
slow flashing ..............IEEE1394 connection is NG. (Loop
connection) confirm the connection.
fast flashing ................IEEE1394 connection is NG. confirm the
connection.
Remote control unit Remote control unit
I EEE1394 SETUP
I EEE1394 SETUP
AUTO PL AY
AUD IO F ORMAT
OFF
F ORMAT 1
DECISION:ENTER BUTTON
SELECT :
DECISION:ENTER BUTTONSELECT :
DIGITAL INTERFACE SETUP
HDMI/DVI PIC TURE ADJUST
HDMI AUDIO SETUP
HDMI AUTO FORMAT
EXIT SETUP
OFF
ON
DENON LINK
IEEE1394
To exit the setup mode
Use the
ª
cursor button to select “EXIT SETUP”, then press the ENTER button. It is also possible to quit by pressing the SETUP
button on the remote control unit.
43
3
Use the
and
ª
cursor buttons to select the desired setting, then press
the ENTER button.
q
When “TV ASPECT” is selected:
4:3 PS
Select this to play wide DVDs in the pan & scan mode (with the sides
of the picture cut off). Discs for which pan & scan is not specified are
played in the letter box mode.
4:3 LB
Select this to play wide DVDs in the letter box mode (with black
strips at the top and bottom).
WIDE (16:9) (Factory default)
Select this to play wide DVDs in the full-screen mode.
EXIT SETUP
PROGRESS I VE MODE
AV1 V IDEO MODE
SQUEEZE MODE
VIDEO SETUP
TV ASPECT
TV TYPE
TV SYSTEM
COMPONENT V I DEO OUT
4:3 PS
4:3 LB
W
IDE(16:9)
DECISION:ENTER BUTTONSELECT :
Remote control unit Remote control unit
When “VIDEO SETUP” is selected
2
Use the
and
ª
cursor buttons to select the desired setting, then press
the ENTER button.
TV ASPECT
Use this to set the shape of your TV’s screen.
TV TYPE
Use this to set your TV’s video format (NTSC, PAL or MULTI).
TV SYSTEM
Select the video output connected to the TV or monitor whose image
you want to view.
On the DVD-A1XV, interlace output, progressive output and HDMI/DVI
output signals are each processed on independent video circuits. The
audio output is optimized for the selected video output, so choose the
video output you wish to view.
COMPONENT VIDEO OUT
Use this to select either the progressive image output or interlace
image output.
SQUEEZE MODE
The size of the screen to be output can be switched.
PROGRESSIVE MODE
The play DVD video, select the desired video mode.
AV1 VIDEO MODE
To select whether composite video signals or S video signals or RGB
signals will be output from the AV1 SCART terminals.
VIDEO SETUP
TV ASPECT
TV TYPE
TV SYSTEM
COMPONENT V I DEO OUT
EXIT SETUP
W
IDE(16:9)
MUL T I
PROGRESSI VE
PROGRESSI VE
OFF
AUTO
SQUEEZE MODE
PROGRESS I VE MODE
VIDEO
AV1 V IDEO MODE
DECISION:ENTER BUTTONSELECT :
1
See pages 31, 32.
Remote control unit Remote control unit
44
3
w
When “TV TYPE” is selected:
NTSC
Select this when your TV’s video format is NTSC.
If NTSC is selected, output format is fixed to NTSC.
PAL
Select this when your TV’s video format is PAL.
If PAL is selected, output format is fixed to PAL.
MULTI (Factory default)
Select this when your TV is compatible with both the NTSC and PAL
formats.
NTSC signals are output from the video output jacks when discs
recorded in NTSC format are played, and PAL signals are output from
the video output jacks when discs recorded in PAL format are played.
NOTE:
If “TV TYPE” is set to a format other than a registered TV format, the
image may no longer be smooth and the top and bottom of the image
may be cut off.
e
When “TV SYSTEM” is selected:
PROGRESSIVE (Factory default)
The audio signals are synchronized with the progressive output.
(For component video output signals when “COMPONENT VIDEO
OUT” at “VIDEO SETUP” is set to “PROGRESSIVE”)
INTERLACED
The audio signals are synchronized with the interlaced output.
(For video output and S-video output signals, as well as for
component video output signals when “COMPONENT VIDEO OUT”
at “VIDEO SETUP” is set to “INTERLACED”)
HDMI/DVI
The audio signals are synchronized with the video signals output via
the HDMI/DVI connectors.
OTHERS
Select this when you want to view both the interlace
output/progressive output image and the HDMI/DVI output image at
the same time.
The audio signals are set to the optimum timing for the interlace
output/progressive output image and the HDMI/DVI output image.
(Note, however, that the audio signals are not synchronized with the
interlace output/progressive output image and the HDMI/DVI output
image. To synchronize them, set to another position.)
r
When “COMPONENT VIDEO OUT” is selected: (NOTE)
PROGRESSIVE (Factory default)
The signals output from the DVD-A1XV’s “COMPONENT VIDEO
OUT” connector are formatted in the progressive format.
Select this when using the DVD-A1XV connected to a progressive
type TV.
INTERLACED
The signals output from the DVD-A1XV’s “COMPONENT VIDEO
OUT” connector are formatted in the interlaced format.
Select this when using the DVD-A1XV connected to an interlace type
TV.
NOTE:
For the component output only, it is possible to switch between
interlace image output and progressive image output. It is not
possible to specify progressive image output for the Video output
connector or S-Video output connector.
Remote control unit Remote control unit
SQUEEZE MODE
TV SYSTEM
VIDEO SETUP
TV ASPECT
TV TYPE
COMPONENT V I DEO OUT
NTSC
PAL
M
ULT I
PROGRESS I VE MODE
AV1 V IDEO MODE
EXIT SETUP
DECISION:ENTER BUTTONSELECT :
SQUEEZE MODE
VIDEO SETUP
TV ASPECT
TV TYPE
TV SYSTEM
COMPONENT V I DEO OUT
PROGRESSI VE
INTERLACED
PROGRESS I VE MODE
AV1 V IDEO MODE
EXIT SETUP
DECISION:ENTER BUTTONSELECT :
SQUEEZE MODE
VIDEO SETUP
TV ASPECT
TV TYPE
TV SYSTEM
COMPONENT V I DEO OUT
PROGRESSI VE
INTERLACED
HDMI/DVI
OTHERS
PROGRESS I VE MODE
AV1 V IDEO MODE
EXIT SETUP
DECISION:ENTER BUTTONSELECT :
45
3
t
When “SQUEEZE MODE” is selected:
OFF (Factory default)
Select this to display as full size of a 16:9 TV,
regardless of the image’s size.
ON
Select this to display the image with a ratio of 4:3 at
the center of a 16:9 TV display, regardless of the
image’s size.
AUTO
Select this when playing back a 4:3 image, display at 4:3 aspect ratio
at the center of a 16:9 TV.
Only effective for set to “WIDE (16:9)” at “TV ASPECT”.
(See page 43.)
No effective for interlaced image.
y
When “PROGRESSIVE MODE” is selected:
AUTO (Factory default)
The set identifies the type of material on the disc being played (film
or video) and selects the mode automatically.
VIDEO1
This mode is best suited for playing discs containing video material.
VIDEO2
This mode is best suited for playing discs containing video material
or 30-frame film material.
u
When “AV1 VIDEO MODE” is selected:
VIDEO (Factory default)
Composite video signals will be output from the AV1 SCART
terminal.
S-VIDEO
S video signals will be output from the AV1 SCART terminal.
RGB
RGB signals will be output from the AV1 SCART terminal.
Remote control unit Remote control unit
SQUEEZE MODE
AV1 V IDEO MODE
VIDEO SETUP
TV ASPECT
TV TYPE
TV SYSTEM
COMPONENT V I DEO OUT
AUTO
V IDEO1
V IDEO2
PROGRESS I VE MODE
EXIT SETUP
DECISION:ENTER BUTTONSELECT :
To exit the setup mode
Use the
ª
cursor button to select “EXIT SETUP”, then press the ENTER button. It is also possible to quit by pressing the SETUP
button on the remote control unit.
SQUEEZE MODE
VIDEO SETUP
TV ASPECT
TV TYPE
TV SYSTEM
COMPONENT V I DEO OUT
VIDEO
S -VIDEO
RGB
PROGRESS I VE MODE
AV1 V IDEO MODE
EXIT SETUP
DECISION:ENTER BUTTONSELECT :
TV
TV
SQUEEZE MODE
VIDEO SETUP
TV ASPECT
TV TYPE
TV SYSTEM
COMPONENT V I DEO OUT
PROGRESS I VE MODE
AV1 V IDEO MODE
EXIT SETUP
DECISION:ENTER BUTTONSELECT :
OFF
ON
AUTO
46
When “AUDIO SETUP” is selected
1
2
See pages 31, 32.
Use the
and
ª
cursor buttons to select the desired setting, then press
the ENTER button.
AUDIO CHANNEL
Use this to adjust for the connected speaker systems.
DIGITAL OUTPUT
Use this to select the digital output’s signal format.
LPCM (44.1 kHz/48 kHz)
Use this to set the digital audio output when playing DVDs recorded in
linear PCM audio.
SOURCE DIRECT
This permits a setting to output the audio without adding speaker
settings to the audio signals of DVD audio or Super Audio CD.
BASS ENHANCER
Set whether or not to output audio signals from the subwoofer when
playing two-channel audio signals.
The BASS ENHANCER settings do not apply to digital outputs.
COMPRESSION
Use this to set the dynamic range output when playing discs.
SACD FILTER
The low pass filter value when playing Super Audio CDs can be set.
AUD I O SETUP
AUD I O CHANNEL
DIGITAL OUTPUT
LPCM(44.1kHz/48kHz)
BASS ENHANCER
SACD F I L TER
M
UL T I CHANNEL
NOR
M
AL
OFF
OFF
SOURCE D I RECT
EXIT SETUP
OFF
OFF
50kHz
COMPRESSION
DECISION:ENTER BUTTONSELECT :
Remote control unit Remote control unit
The audio channel, digital output, LPCM conversion mode and source
direct bass expand items cannot be selected when DENON LINK or
IEEE1394 is selected or when the HDMI audio is “MULTI (NORMAL)”.
47
3
Use the
and
ª
cursor buttons to select the desired setting, then press
the ENTER button.
q
When “AUDIO CHANNEL” is selected:
MULTI CHANNEL (Factory default)
Select this for systems in which three or more speakers are
connected.
When MULTI CHANNEL is set, the speaker settings (SPEAKER
CONFIGURATION), speaker output level adjustment (CHANNEL
LEVEL) and speaker distances (DELAY TIME) can be set.
2CH (SRS OFF)
Select this does not to use the SRS TruSurround function for
systems in which only two speakers are connected.
When connecting with Dolby Prologic decoder (Dolby Prologic
amplifier etc.), select this setting.
2CH (SRS ON)
Select this to use the SRS TruSurround function for systems in which
only two speakers are connected.
The indicator “ in the display lights at this mode.
2 The SRS TruSurround function
(only for DVD-videos and Video CDs)
The multi-channel sound normally achieved with five speakers is
recreated using only the two front stereo speakers. This results in
a sound with a nearly natural sense of movement that seems to
surround the head, without the strong directivity characteristic of
multi-speaker systems.
NOTES:
Note that for some discs the effect will be weak or there will be
no effect.
•Turn off other surround functions (the TV’s surround mode,
etc.).
B
When “MULTI CHANNEL” is selected, use the
and
ª
cursor
buttons to select the item to be set, then press the ENTER button.
SPEAKER CONFIGURATION
Use this to select the types of the different speakers.
CHANNEL LEVEL
Use this to adjust the output level of the different speakers.
DELAY TIME
Use this to set the distance from the different speakers to the
listening position.
The SPEAKER CONFIGURATION settings only apply to analog
outputs.
To exit the SPEAKER SETUP mode
Use the
ª
cursor button to select “AUDIO SETUP” then press
ENTER button.
AUD I O SETUP
AUD I O CHANNEL
DIGITAL OUTPUT
LPCM(44.1kHz/48kHz)
BASS ENHANCER
SACD F I L TER
SOURCE D I RECT
EXIT SETUP
COMPRESSION
DECISION:ENTER BUTTONSELECT :
M
UL T I CHANNEL
2CH(SRS ON)
2CH(SRS OFF)
Remote control unit Remote control unit
SPEAKER SETUP
SPEAKER CONF I GURAT I ON
CHANNE L L EVEL
DELAY TI
M
E
AUDIO SETUP
DECISION:ENTER BUTTONSELECT :
is a trademark of SRS Labs, Inc.
TruSurround technology is incorporated under license from SRS
Labs, Inc.
48
B
When “SPEAKER CONFIGURATION” is selected, use the
and
ª
cursor buttons to select the speaker to be set then press the
ENTER button.
The type of speaker used for the front speakers, center speaker,
subwoofer and surround speakers can be set. Use the and ª
cursor buttons to select the speaker type, then press the
ENTER button.
LARGE
Select this when a large speaker is connected.
SMALL
Select this when a small speaker is connected.
NONE
Select this when no speaker is connected.
YES
Select this when a subwoofer is connected.
NO
Select this when no subwoofer is connected.
When “CROSSOVER” is selected:
40 Hz, 60 Hz, 80 Hz (Factory default), 100 Hz, 120 Hz, set the
frequency of crossover.
Press the RETURN button to return to the “SPEAKER SETUP”
menu.
B
When “CHANNEL LEVEL” is selected, use the
and
ª
cursor
buttons to select the speaker to be adjusted, then use the
0
and
1
cursor buttons to set the level.
TEST TONE
Use the
0
and
1
cursor buttons to select auto or manual.
Adjust so that the volume of the test tones output from the
different speakers sounds the same.
The volume level output from the front speakers (left and right
channels), center speaker, surround speakers (left and right
channels) and subwoofer can be adjusted.
The volume level can be adjusted between 0 and –10 dB in
steps of 1 dB.
Settings SW +10 dB to “ON” increases by 10 dB the volume
level that is output from the subwoofer.
Press the RETURN button to return to the “SPEAKER SETUP”
menu.
SPEAKER SETUP
CHANNEL LEVEL
DECISION:ENTER BUTTONSELECT :
TEST TONE
FRONT LCH
CENTER
FRONT RCH
SURROUND RCH
SURROUND L CH
SUB
W
OOF ER
S
W + 1 0
d
B
OFF
0dB
0dB
0dB
0dB
0dB
0dB
OFF
Remote control unit
3
SPEAKER SETUP
SPEAKER CONF I GURAT I ON
FRONT SP
CENTER SP
SUB
W
OOF ER
SURROUND SP
CROSSOVER
LARGE
LARGE
YES
LARGE
80Hz
DECISION:ENTER BUTTONSELECT :
Remote control unit Remote control unit
49
3
B
When “DELAY TIME” is selected:
With 5.1-channel surround sound, ideally the distance between
the listening position and all the speakers aside from the
subwoofer should be the same. The delay time setting can be
used to make the sound from the different speakers reach the
listening position at the same time.
Use the
and
ª
cursor buttons to select the setting item, then
press the ENTER button.
When “DISTANCE” is selected:
METERS (when the
0 cursor button is pressed):
The unit of distance is set to meters (“m”).
FEET (when the
1 cursor button is pressed):
The unit of distance is set to feet (“ft”).
When “FRONT LCH”, “FRONT RCH”, “CENTER”,
“SURROUND LCH”, “SURROUND RCH”, “SUBWOOFER” is
selected:
Use the
0 and 1 cursor buttons to set the distance from the
listening position to the different speakers.
The distance can be set within the range of 0 to 18 meters
(60 feet).
The maximum difference in speaker distance for which
adjustment is possible is 4.5 meters (15 feet).
•When “DEFAULT” is selected:
When “DEFAULT” is selected and the ENTER button is
pressed, all the items are restored to their factory default
settings.
When digital connections are made with an AV amplifier, make
the speaker settings on the AV amplifier.
For DVD audio discs, the disc’s settings are given priority, so the
sound may not be produced as set with the above speaker mode
setting.
Press the RETURN button to return to the “SPEAKER SETUP”
menu.
SPEAKER SETUP
DELAY TIME
DECISION:ENTER BUTTONSELECT :
DISTANCE
FRONT LCH
CENTER
FRONT RCH
SURROUND RCH
SURROUND L CH
SUB
W
OOF ER
DEFAULT
ON
METERS
3.6 m
3.6 m
3.6 m
3.6 m
3.0 m
3.0 m
SPEAKER SETUP
DELAY TIME
DECISION:ENTER BUTTONSELECT :
DISTANCE
FRONT LCH
CENTER
FRONT RCH
SURROUND RCH
SURROUND L CH
SUB
W
OOF ER
DEFAULT
ON
METERS
3.6 m
3.6 m
3.6 m
3.6 m
3.0 m
3.0 m
SPEAKER SETUP
DELAY TIME
DECISION:ENTER BUTTONSELECT :
DISTANCE
FRONT LCH
CENTER
FRONT RCH
SURROUND RCH
SURROUND L CH
SUB
W
OOF ER
DEFAULT
METERS
ON
3.6 m
3.6 m
3.6 m
3.6 m
3.0 m
3.0 m
Remote control unit Remote control unit
SPEAKER SETUP
DELAY TIME
DECISION:ENTER BUTTONSELECT :
DISTANCE
FRONT LCH
CENTER
FRONT RCH
SURROUND RCH
SURROUND L CH
SUB
W
OOF ER
DEFAULT
ON
METERS
3.6m
3.6m
3.6m
3.6m
3.0m
3.0m
50
3
w
When “DIGITAL OUTPUT” is selected:
NORMAL (Factory default)
When playing DVDs recorded in Dolby Digital or DTS, bitstream
signals are output from the digital audio output terminals. When
playing DVDs recorded in linear PCM or packed PCM, linear PCM
signals are output.
Select “NORMAL” when making digital connections to an AV
amplifier with built-in Dolby Digital and DTS decoder.
PCM
When playing Dolby Digital/DTS bitstream signals or DVDs recorded
in linear PCM or packed PCM, the signals are converted into 48
kHz/16-bit PCM (2-channel) signals and output from the digital
outputs. When playing DVDs recorded in PCM, linear PCM signals
are output.
e
When “LPCM (44.1 kHz/ 48 kHz)” is selected:
OFF (Factory default)
When playing linear PCM or packed PCM DVDs that are not
copyright-protected, for 2-channel PCM audio signals up to 96 kHz,
linear PCM signals are output as such without being converted from
the digital outputs. (176.4 kHz and 192 kHz signals are converted to
88.2 kHz and 96 kHz, respectively.)
For DVDs containing multi-channel PCM signals, the digital signals
are down-mixed for output into two channels, front left and right.
(Only the front left and right channels are output for sources for
which down-mixing is prohibited.)
When playing copyright-protected linear PCM or packed PCM DVDs,
in consideration of copyrights, no digital signals are output for
sources exceeding 48 kHz/16 bits. When playing such sources,
either set to “ON” or make analog connections. (See page 16.)
ON
Linear PCM and packed PCM signals are converted to 44.1 kHz or
48 kHz and output. (The PCM digital audio output signals are
converted to 48 kHz or less in consideration of copyrights.) When
making digital connections to an AV amplifier that is not compatible
with 96 kHz/88.2 kHz signals, set to “ON”.
r
When “SOURCE DIRECT” is selected:
OFF (Factory default)
Please set to OFF when performing speaker settings or setting the
delay time and playing back.
ON
Set to ON when playing back without performing the processing of
speaker settings. Performing this setting will result in the setting of
the DTS recommended all-channel, full bandwidth playback. (Note
that the volume of the sub woofer will increase by 5 dB, and there
will be an increase of 15 dB with a Super Audio CD.) This is also set
when playing back a 6-channel source of DVD audio that has been
recorded with all channels and full bandwidth. When set to “ON”,
the speaker size will be set to “Large” for all speakers and the sub
woofer will be set to “Yes”. When playing back software such as
this, perform the analog connections according to the software
instruction manual.
AUD I O SETUP
AUD I O CHANNEL
DIGITAL OUTPUT
LPCM(44.1kHz/48kHz)
BASS ENHANCER
SACD F I L TER
SOURCE D I RECT
EXIT SETUP
COMPRESSION
DECISION:ENTER BUTTONSELECT :
ON
OFF
AUD I O SETUP
AUD I O CHANNEL
DIGITAL OUTPUT
LPCM(44.1kHz/48kHz)
BASS ENHANCER
SACD F I L TER
SOURCE D I RECT
EXIT SETUP
COMPRESSION
DECISION:ENTER BUTTONSELECT :
ON
OFF
AUD I O SETUP
AUD I O CHANNEL
DIGITAL OUTPUT
LPCM(44.1kHz/48kHz)
BASS ENHANCER
SACD F I L TER
SOURCE D I RECT
EXIT SETUP
COMPRESSION
DECISION:ENTER BUTTONSELECT :
NORMAL
PCM
Remote control unit Remote control unit
51
3
t
When “BASS ENHANCER” is selected: (For 2 channel source.)
OFF (Factory default)
No sound is produced from the subwoofer.
ON
Sound is produced from the subwoofer.
In the case, set the subwoofer to “YES” at the speaker settings.
This works only with analog audio output.
This does not work, at “SOURCE DIRECT” is on.
y
When “COMPRESSION” is selected:
OFF (Factory default)
Select this for the standard range.
ON
Select this to achieve powerful sound even when the volume is low.
This setting is suited for watching DVDs late at night with the volume
low. (This setting is only valid for DVDs recorded in Dolby Digital.)
u
When “SACD (Super Audio CD) FILTER” is selected:
50kHz (Factory default)
When playing Super Audio CDs, high frequencies of 50kHz and
higher are cut.
100kHz
When playing Super Audio CDs, high frequencies of 100kHz and
higher are cut.
Set to 100kHz when a high frequency compatible AV amplifier is
connected.
AUD I O SETUP
AUD I O CHANNEL
DIGITAL OUTPUT
LPCM(44.1kHz/48kHz)
BASS ENHANCER
SACD F I L TER
SOURCE D I RECT
EXIT SETUP
COMPRESSION
DECISION:ENTER BUTTONSELECT :
ON
OFF
AUD I O SETUP
AUD I O CHANNEL
DIGITAL OUTPUT
LPCM(44.1kHz/48kHz)
BASS ENHANCER
SACD F I L TER
SOURCE D I RECT
EXIT SETUP
COMPRESSION
DECISION:ENTER BUTTONSELECT :
100kHz
50kHz
To exit the setup mode
Use the
ª
cursor button to select “EXIT SETUP”, then press the ENTER button. It is also possible to quit by pressing the SETUP
button on the remote control unit.
Remote control unit Remote control unit
AUD I O SETUP
AUD I O CHANNEL
DIGITAL OUTPUT
LPCM(44.1kHz/48kHz)
BASS ENHANCER
SACD F I L TER
SOURCE D I RECT
EXIT SETUP
COMPRESSION
DECISION:ENTER BUTTONSELECT :
OFF
ON
52
When “RATINGS” is selected
1
2
3
See pages 31, 32.
Use the
and
ª
cursor buttons to select the desired
setting, then press the ENTER button.
RATING LEVEL
Use this to restrict playback of adult DVDs you do
not want children to view. Note that even with adult
DVDs, viewing cannot be restricted unless the
restriction level is recorded on the disc.
PASSWORD
Use this to change the password.
The default password is “0000”.
Use the
and
ª
cursor buttons to select the desired
setting, then press the ENTER button.
q
When “RATING LEVEL” is selected:
0 (LOCK ALL)
Select this to disable playback of all DVDs.
Use this for example to disable playback of adult
DVDs on which the rating level is not recorded.
1
Select this to play only DVDs for children. (Adult
and general audience DVDs cannot be played.)
2 to 7
Select this to play DVDs for general audiences
and children. Adult DVDs cannot be played.
8(NO LIMIT) (Factory default)
Select this to play all DVDs.
Use the number buttons to input a 4-digit
password, then press the ENTER button.
The default password is “0000”.
Do not forget the password.
The setting cannot be changed without
inputting the correct password.
RAT INGS
RAT ING LEVEL
PASS
W
ORD
DECISION:ENTER BUTTONSELECT :
EXIT SETUP
8(NO L IMI T)
RAT INGS
RAT ING LEVEL
PASS
W
ORD
DECISION:ENTER BUTTONSELECT :
EXIT SETUP
0(LOCK ALL)
1
2
3
4
5
6
7
8(NO L IMI T)
Remote control unit
Remote control unit
RAT INGS
RAT ING LEVEL
PASS
W
ORD
CURRENT PASS
W
ORD
PLEASE ENTER PASS
W
ORD
----
DECISION:ENTER BUTTONSELECT: 0-9
Remote control unit
Remote control unit
Remote control unit
Remote control unit
53
3
w
When “PASSWORD” is selected:
Use the
1
cursor button to select the
“CHANGE”, then press the ENTER button.
Use the number buttons to input a old (current) 4-
digit password.
The default password is “0000”.
Use the number buttons to input a new 4-digit
password.
Use the number buttons to input a new 4-digit
password again. (for the confirmation.)
Then press the ENTER button.
Do not forget the password.
The setting cannot be changed without
inputting the correct password.
RAT INGS
RAT ING LEVEL
PASS
W
ORD
OLD PASS
W
ORD
PLEASE ENTER OLD PASS
W
ORD
XXXX
NE
W
PASS
W
ORD
----
CONF IRM PASS
W
ORD
----
DECISION:ENTER BUTTONSELECT: 0-9
RAT INGS
RAT ING LEVEL
PASS
W
ORD
OLD PASS
W
ORD
PLEASE ENTER NEW PASS
W
ORD
XXXX
NE
W
PASS
W
ORD
XXXX
CONF IRM PASS
W
ORD
----
DECISION:ENTER BUTTONSELECT :0-9
RAT INGS
RAT ING LEVEL
PASS
W
ORD
OLD PASS
W
ORD
PLEASE REENTE R NEW PASS
W
ORD
XXXX
NE
W
PASS
W
ORD
XXXX
CONF IRM PASS
W
ORD
XXXX
DECISION:ENTER BUTTONSELECT :0-9
Remote control unit
To exit the setup mode
Use the
ª
cursor button to select “EXIT SETUP”, then press the ENTER button. It is also possible to quit by pressing the SETUP
button on the remote control unit.
RAT INGS
RAT ING LEVEL
PASS
W
ORD
DECISION:ENTER BUTTONSELECT :
EXIT SETUP
CHANGE
Remote control unit
Remote control unit
Remote control unit
Remote control unit Remote control unit
54
When “OTHER SETUP” is selected
1
2
3
See pages 31, 32.
Use the
and
ª
cursor buttons to select the desired setting, then press
the ENTER button.
PLAYER MODE
The DVD video play mode can be set to play the DVD video contents
included on a DVD audio disc.
CAPTIONS
Use this to set whether or not to display the closed captions recorded
on DVDs.
WALL PAPER
Use this to select the image to be shown on the screen in the stop
mode and CD play mode.
SCREEN SAVER
The screen saver function prevents ghosting on the TV screen.
DISPLAY
The setting of whether or not there will be an indication on the display
of this unit only for the 2 seconds immediately following the operation,
even while the display has been off.
AUTO POWER MODE
To save power, DVD-A1XV’s can automatically be set to the standby
mode when it is not used for long periods of time.
SLIDE SHOW
The time interval for switching to the next still picture when playing
slide shows of still pictures (in JPEG format) can be set.
Use the
and
ª
cursor buttons to select the desired setting, then press
the ENTER button.
q
When “PLAYER MODE” is selected:
AUDIO (Factory default)
Set this to play the DVD audio signals as such.
VIDEO
Set this to play the DVD video contents included on a DVD audio
disc.
OTHER SETUP
PLAYER
M
ODE
SCREEN
SAVER
CAPT IONS
WAL L PAPER
AUDIO
OFF
BLUE
OFF
DECISION:ENTER BUTTONSELECT :
AUTO PO
W
ER
M
ODE
SL IDE SHO
W
EXIT SETUP
OFF
OFF
5SEC
DISPLAY
OTHER SETUP
PLAYER
M
ODE
CAPT IONS
WAL L PAPER
SCREEN
SAVER
DISPLAY
AUTO PO
W
ER
M
ODE
SL IDE SHO
W
EXIT SETUP
AUDIO
VIDEO
DECISION:ENTER BUTTONSELECT :
Remote control unit Remote control unit
Remote control unit Remote control unit
55
3
OTHER SETUP
PLAYER
M
ODE
CAPT IONS
WAL L PAPER
SCREEN
SAVER
DISPLAY
AUTO PO
W
ER
M
ODE
SL IDE SHO
W
EXIT SETUP
DECISION:ENTER BUTTONSELECT :
BLUE
GRAY
BLACK
PICTURE
OTHER SETUP
PLAYER
M
ODE
CAPT IONS
WAL L PAPER
DISPLAY
DECISION:ENTER BUTTONSELECT :
SCREEN
SAVER
DISPLAY
AUTO PO
W
ER
M
ODE
SL IDE SHO
W
EXIT SETUP
OFF
ON
OTHER SETUP
PLAYER
M
ODE
CAPT IONS
WAL L PAPER
SCREEN
SAVER
DISPLAY
AUTO PO
W
ER
M
ODE
SL IDE SHO
W
EXIT SETUP
DECISION:ENTER BUTTONSELECT :
OFF
ON
w
When “CAPTIONS” is selected:
OFF (Factory default)
Select this when you do not want to display the captions on the
screen when playing DVDs containing English captions
ON
Select this to display the captions on the screen when playing DVDs
containing English captions.
e
When “WALL PAPER” is selected:
BLUE (Factory default)
Select this to display a blue background on the TV display.
GRAY
Select this to display a gray background on the TV display.
BLACK
Select this to display a black background on the TV display.
PICTURE
Select this to display the picture on the TV display.
r
When “SCREEN SAVER” is selected:
OFF (Factory default)
The screen saver function does not work.
ON
If more than 5 minutes passes while in the stop, pause or other
mode, the screen saver function is activated to prevent ghosting on
the TV screen.
t
When “DISPLAY” is selected:
OFF (Factory default)
This is valid when the display has been switched off. The display will
not show an indication even when the button (ex. skip, stop, etc.)
has been pressed.
ON
This is valid when the display has been switched off. When the
button (ex. skip, stop, etc.) is pressed, the indication will appear on
the display for approximately 2 seconds.
Remote control unit Remote control unit
NOTES:
An English caption decoder is required to display English
captions.
DVDs with caption signals are indicated by the , ,
mark.
English captions cannot be displayed when playing DVDs which
do not contain caption signals.
OTHER SETUP
PLAYER
M
ODE
CAPT IONS
WAL L PAPER
SCREEN
SAVER
DISPLAY
AUTO PO
W
ER
M
ODE
SL IDE SHO
W
EXIT SETUP
DECISION:ENTER BUTTONSELECT :
OFF
ON
56
OTHER SETUP
PLAYER
M
ODE
CAPT IONS
WAL L PAPER
SCREEN
SAVER
DECISION:ENTER BUTTONSELECT :
DISPLAY
AUTO PO
W
ER
M
ODE
SL IDE SHO
W
EXIT SETUP
5SEC
To exit the setup mode
Use the
ª
cursor button to select “EXIT SETUP”, then press the ENTER button. It is also possible to quit by pressing the SETUP
button on the remote control unit.
3
y
When “AUTO POWER MODE” is selected:
OFF (Factory default)
The power does not automatically switch to the standby mode.
ON
The DVD-A1XV’s power turns off and the standby mode is set if the
DVD-A1XV remains in the stop mode for approximately 30 minutes.
u
When “SLIDE SHOW” is selected:
Use the
and
ª
cursor buttons to set the time interval.
The time interval can be set within 5 and 15 seconds. (The factory
default setting is 5 seconds.)
Remote control unit Remote control unit
OTHER SETUP
PLAYER
M
ODE
CAPT IONS
WAL L PAPER
SCREEN
SAVER
DECISION:ENTER BUTTONSELECT :
DISPLAY
AUTO PO
W
ER
M
ODE
SL IDE SHO
W
EXIT SETUP
OFF
ON
57
PLAY STOP
OPEN/ CLOSE
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-A1XV
STILL / PAUSE
PURE
DIRECT
SELECT
VIDEO MODE
PUSH ENTER
FORMATSELECT
HDMI / DVI SUPER
AUDIO CD
SET UP
ON / STANDBY
4
MARKERRANDOM DIMMERZOOM
PICT ADJ.SET UP MEMORY
A-BREPEAT
SELECT
AUDIOSUBTITLE
ANGLE
PA
G
E
P
IC
T
U
R
E
A
D
J
U
S
T
P
U
R
E D
IR
E
C
T
D
IS
P
L
A
Y
TO
P
M
EN
U
R
E
T
U
R
N
M
EN
U
S
K
IP
S
LO
W
/S
EA
R
C
H
P
L
A
Y
S
T
ILL
/P
A
U
S
E
S
T
O
P
B
A
C
K
LIG
H
T
1, 3
4
2
9
USING THE PURE DIRECT MODE
2 In the pure direct mode, only analog audio signals (no video signals, etc.) are output, thereby achieving high quality sound.
1
2
3
Press the PURE DIRECT MEMORY button.
The output status of the video signals, etc., can be
stored at MODE 1 and MODE 2 as desired.
Use the and ª cursor buttons to select the mode, then
press the ENTER button.
DIGITAL OUTPUT
ON : Digital audio signals are output.
OFF : Digital audio signals are not output.
Does not function for DENON LINK or IEEE1394
digital outputs. For these outputs, set “OFF” at the
initial settings.
VIDEO OUT
ON : Video signals are output.
OFF : Video signals are not output.
DISPLAY
ON : It is indicate in Display of the main unit.
OFF : It is not indicate in Display of the main unit.
When the video output is set to “OFF” or “ALL OFF”,
neither HDMI video nor audio signals are output.
Also, when the “HDMI AUDIO SETUP” is set to
“MULTI (NORMAL)”, the setting of DIGITAL OUTPUT
cannot be made. (See pages 38, 39.)
When DENON LINK and IEEE 1394 settings are valid,
the setting of DIGITAL OUTPUT cannot be selected.
Remote control unit
Remote control unit
PURE DIRECT
MEMORY
SELECT
PURE DIRECT MEMORY
PURE D I RECT MODE
PURE D I RECT MODE 1
SETUP
DIGI TAL OUTPUT
VIDEO OUT
DI SPLAY
ON
ON
ON
DECISION:ENTER BUTTON
SELECT :
MODE1
MODE2
Remote control unit
PURE DIRECT
MEMORY
SELECT
Display the setting mode
PURE DIRECT MEMORY
PURE D I RECT MODE
PURE D I RECT MODE 1
SETUP
DIGI TAL OUTPUT
VIDEO OUT
DI SPLAY
DECISION:ENTER BUTTON
SELECT :
MODE1
ON
OFF
Press the PURE DIRECT MEMORY button.
All of the settings are stored in the memory.
58
4
Main unit
PURE
DIRECT
SELECT
Press the PURE DIRECT SELECT button.
The modes described below will appear on the display.
NORMAL : All signals are output normally.
MODE 1 : The settings stored for MODE 1 are used.
The factory default settings are:
“DIGITAL OUTPUT” : “ON”
“VIDEO OUT” : “ON”
“DISPLAY” : “ON”
MODE 2 : The settings stored for MODE 2 are used.
The factory default settings are:
“DIGITAL OUTPUT” : “ON”
“VIDEO OUT” : “ON”
“DISPLAY” : “ON”
ALL OFF : No indicate in Display of the main unit,
video and digital signals are not
out.(except analog audio output)
PLAY STOP
OPEN/ CLOSE
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-A1XV
STILL / PAUSE
PURE
DIRECT
SELECT
VIDEO MODE
PUSH ENTER
FORMATSELECT
HDMI / DVI SUPER
AUDIO CD
SET UP
ON / STANDBY
1
10
USING THE SUPER AUDIO CD SETUP
2 On a Super Audio CD, the stereo and multi – channel areas are separate.
Hybrid discs comprise 2-layer structure of Super Audio CD layer and a CD layer.
The area/layer can be set to be played with priority.
1
Press the SUPER AUDIO CD SETUP button.
The modes described below will appear on the display.
MULTI (Factory default)
When playing a Super Audio CD disc, the multi –
channel area will be played back with priority.
STEREO
When playing a Super Audio CD disc, the stereo area
will be played back with priority.
CD
When playing a Super Audio CD disc, the CD layer will
be played back with priority.
When playing back a disc that does not have a selected
area/layer, another area/layer will be played back
automatically.
Main unit
SUPER
AUDIO CD
SETUP
Display the setting mode
MULTI
STEREO
CD
Remote control unit
PURE DIRECT
MEMORY
SELECT
SELECT FORMAT NTSC/PAL
AUDIOSUBTITLE
ANGLE
H
D
M
I/D
V
I
O
P
E
N
/
S
U
P
E
R
A
U
D
IO
C
L
O
S
E
C
D
S
E
T
U
P
P
R
O
G
R
A
M
/D
IR
E
C
T
C
L
E
A
R
C
A
L
L
S
E
A
R
C
H
M
O
D
E
D
IS
P
L
A
Y
T
O
P
M
E
N
U
R
E
T
U
R
N
M
E
N
U
B
A
C
K
L
IG
H
T
P
O
W
E
R
O
F
F
P
O
W
E
R
O
N
1
Remote control unit
SUPER AUDIO
CD SETUP
59
MARKERRANDOM DIMMERZOOM
PICT ADJ.SET UP MEMORY
A-BREPEAT
SELECT
AUDIOSUBTITLE
ANGLE
P
A
G
E
P
IC
T
U
R
E
A
D
JU
S
T
P
U
R
E
D
IR
E
C
T
D
IS
P
LA
Y
TO
P
M
E
N
U
R
E
T
U
R
N
M
EN
U
S
K
IP
S
L
O
W
/S
E
A
R
C
H
P
LA
Y
S
T
IL
L
/P
A
U
S
E
S
T
O
P
B
A
C
K
L
IG
H
T
1
2, 3, 4, 5, 6, 7
11
ADJUSTING THE PICTURE QUALITY
1
Press the PICTURE ADJUST button.
The image quality adjustment screen will appear.
STD
Returns the settings to the factory default settings.
M1 TO M5
Image quality settings that have been adjusted to your
preference can be stored to 5 memories, M1 to M5.
SET
SET permits set to setup level and setting of the
screen display position (horizontal and vertical).
Remote control unit
ADJUST
PICTURE
PICT ADJ.
PICTURE MODE
STD M1 M2 M3 M4 M5 SET
2
Select the memory using the 2 cursor buttons (0, 1) and
press the ENTER button.
IMAGE QUALITY ADJUSTMENT 1
This permits adjustment of the contrast, brightness,
sharpness and hue. / Advance to Operation 3
IMAGE QUALITY ADJUSTMENT 2
This permits adjustment of the white level, black level
and chroma level. / Advance to Operation 4.
IMAGE QUALITY ADJUSTMENT 3
This permits adjustment of the enhancer.
/ Advance to Operation 5.
GAMMA CORRECTION
This is selected when dark portions of the image are
obscure, or bright portions are much brighter than
necessary. / Advance to Operation 6.
Remote control unit
MEMORY 1
123
000
MH
00
60
4
MEMORY 1
123
00OFF
E
E
When Image Quality Adjustment 2 is selected and
adjusted:
WHITE LEVEL (–5 to +5) (Factory default: 0)
This adjusts the white level.
BLACK LEVEL (–5 to +5) (Factory default: 0)
This adjusts the black level.
CHROMA LEVEL (–6 to +6) (Factory default: 0)
This adjusts the density of the color.
Remote control unit
5
When Image Quality Adjustment 3 is selected and
adjusted:
ENHANCER (0 to +11) (Factory default: 0)
This emphasizes the contour of the image.
DNR (Digital Noise Reduction) (0 to +3)
(Factory default: 0)
This reduces video noise.
CCS (ON/OFF) (Factory default: OFF))
This performs removal of the color signal component
for images in which the color signal component is
mixed with the brightness signal. (Only effective
with progressive images.)
123
000
MEMORY 1
3
When Image Quality Adjustment 1 is selected and
adjusted:
•Press cursor button (ª), then select the image quality
adjustment item with cursor buttons (
0, 1), set the
adjustment value with cursor buttons (, ª), and press
the ENTER button.
All of the adjusted contents will be stored.
CONTRAST (–6 to +6) (Factory default: 0)
This adjusts the light/dark difference of the image.
BRIGHTNESS (0 to +12) (Factory default: 0)
This adjusts the brightness of the image.
SHARPNESS (MID) (–6 to +6) (Factory default: 0)
This adjusts the sharpness of the image for the
intermediate frequencies.
SHARPNESS (HIGH) (–6 to +6) (Factory default: 0)
This adjusts the sharpness of the image for the high
frequencies. (Only effective for progressive images.)
HUE (–6 to +6) (Factory default: 0)
This adjusts the balance between green and red.
(This does not affect the component interlaced
output.)
MEMORY 1
123
0000
MH
0
Remote control unit
Remote control unit
61
6
Select the adjust point with cursor buttons (0, 1), set the adjustment brightness level with cursor buttons (, ª), and press
the ENTER button.
(If the PICTURE ADJUST button is pressed before pressing the enter button, an adjustment level is not stored)
The brightness level can be adjusted in range of 16 to 235.
•Pressing the cursor button () raises the level (and the image becomes brighter), and pressing the cursor button (ª) lowers
the level (and the image becomes darker).
•A press of the CLEAR button returns all of the setting points to the standard level.
The level of the selected point cannot exceed the level of the points above and below that point.
(A dark portion cannot be set to exceed a portion that is brighter than it.)
MEMORY 1
0
0
100
235
GO : 0 2 4
(Figure 2)
When Gamma Correction is selected and adjusted:
Two kinds of displays are prepared for adjustment of Gamma Correction.
When use the Numerical table of Gamma Correction. (Figure 1)
:Pressing the cursor button (ª)
When use the Graph of Gamma Correction. (Figure 2)
:Pressing the enter button
Remote control unit
MEMORY 1
123
24 32 48 80 96 128 160 19264
G0 G1 G2 G4 G5 G6 G7 G8
224
G9G3
(Figure 1)
REFERENCE:
In the Graph of Gamma correction, the horizontal axis indicates the brightness level of the image that is recorded on the disc, and
the vertical axis indicates the brightness level of the image when it is output from this unit.
MEMORY 1
0
0
100
235
GO : 0 2 4
MEMORY 1
0
0
100
235
GO : 0 2 4
When bright points of the disc side are
adjusted to the “dark” of the output side,
the fine parts of the bright portion that
normally become hard to see, become an
easily discerned image.
When dark points of the disc side are
adjusted to the “bright” of the output side,
the fine parts of the dark portion that
normally become hard to see, become an
easily discerned image.
To exit the Image Quality Adjustment mode
Press the PICTURE ADJUST button.
62
STD(STANDARD)
M1(MEMORY1)
M2(MEMORY2)
M3(MEMORY3)
M4(MEMORY4)
M5(MEMORY5)
SET
1(ADJUSTMENT 1)
2(ADJUSTMENT 2)
3(ADJUSTMENT 3)
GAMMA
CONTRAST
BRIGHTNESS
SHARPNESS(MID)
SHARPNESS(HI)
HUE
WHITE LEVEL
BLACK LEVEL
CHROMA LEVEL
ENHANCER
DNR
CCS
G0~G9
SETUP LEVEL
H.POSITION
V.POSITION
PICTURE MODE
1 This does not affect the HDMI/DVI output.
2 Only effective for HDMI, DVI and progressive scan.
3 This does not affect the interlaced of component video output.
2
When the Display Position is Selected and Adjusted:
•Press the cursor button (ª), then select the
horizontal/vertical direction with the cursor buttons (
0,
1), set the adjustment value with the (, ª) cursor
buttons, and press the ENTER button.
SETUP LEVEL (0 IRE, 0 IRE)
(Factory default: 0 IRE)
This corrects floating black.
H. POSITION (–7 to +7) (Factory default: 0)
•A position adjustment is permitted left and right.
V. POSITION (–7 to +7) (Factory default: 0)
•A position adjustment is permitted up and down.
7
PICTURE MODE
STD M1 M2 M3 M4 M5 SET
PIC SETUP
SETUP LEVEL
0
0
0
To exit the picture adjust mode
Press the PICTURE ADJUST button.
Remote control unit
2
2
2
2
1
2
3
63
PLAY STOP
OPEN/ CLOSE
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-A1XV
STILL / PAUSE
PURE
DIRECT
SELECT
VIDEO MODE
PUSH ENTER
FORMATSELECT
HDMI / DVI SUPER
AUDIO CD
SET UP
ON / STANDBY
3, 4
1 2
12
USING THE VIDEO SETUP
2 The video output setting of the HDMI and the DVI-D connectors can be changed.
2 The video output setting of the PICTURE MODE, TV SYSTEM, SQUEEZE MODE and AUDIO ADJUST also can be changed.
1
Press the HDMI/DVI SELECT button.
The modes described below will appear on the display.
HDMI/DVI OFF (Factory default)
Not output via the HDMI and DVI-D connectors. Set to “HDMI/DVI OFF”
when not connecting to these connectors.
HDMI Y Cb Cr
The Y Cb Cr format video signals and audio signals are output via the HDMI
connector.
The RGB format video signals are output via the DVI-D connector.
HDMI RGB
The RGB format video signals and audio signals are output via the HDMI
connector.
The RGB format video signals are output via the DVI-D connector.
When connecting to the DVI device via the HDMI connector, signals are
output in RGB format regardless of whether “HDMI Y Cb Cr” or “HDMI
R G B” is set.
Main unit
SELECT FORMAT
HDMI / DVI
The HDMI and DVI indicators flash when the connection is being checked, then stop flashing, once the check is completed.
HDMI/DVI OFF
HDMI Y Cb Cr
HDMI R G B
SELECT FORMAT NTSC/PAL
AUDIOSUBTITLE
ANGLE
H
D
M
I/D
V
I
O
P
EN
/
S
U
P
ER
A
U
D
IO
C
LO
SE
C
D
S
ET
U
P
P
R
O
G
R
A
M
/D
IR
E
C
T
C
LE
A
R
C
A
L
L
S
EA
R
C
H
M
O
D
E
D
IS
P
LA
Y
T
O
P
M
EN
U
B
A
C
K
LIG
H
T
P
O
W
E
R
O
F
F
P
O
W
ER
O
N
1
2
Remote control unit
HDMI/DVI
SELECT FORMAT
Display the setting mode
2
Main unit
SELECT FORMAT
HDMI / DVI
480P/576P
720P
1080i
Remote control unit
HDMI/DVI
SELECT FORMAT
Press the HDMI/DVI FORMAT button.
The modes described below will appear on the display.
Select the item you wish to set and define it.
480P/576P (Factory default)
Outputs the image via the HDMI or DVI-D connector at 480P or 576P.
720P
Outputs the image via the HDMI or DVI-D connector at 720P.
1080i
Outputs the image via the HDMI or DVI-D connector at 1080i.
AUTO
The performance of the HDMI device connected to the HDMI/DVI-D
connectors is detected automatically and the signals are output according to
the HDMI device’s panel resolution or maximum resolution. The panel
resolution or maximum resolution is selected according to the setting made
at “HDMI AUTO FORMAT” in the initial settings. (By factory default this is
set to “PANEL RES.”. (See pages 38, 41.) ) When a DVI device is connected,
the signals are output with a resolution of “480P/576P” automatically, so set
the resolution manually.
AUTO
64
3
Turning the VIDEO MODE knob.
The modes described below will appear on the display.
Select the item you wish to set and press the VIDEO MODE knob to define
it.
PICTURE MODE
It is possible to select between five modes at which picture quality settings
are stored (M1 to M5) as well as the standard settings set upon shipment
from the factory. (See pages 59 ~ 62.)
TV SYSTEM
Select the video output connected to the TV or monitor whose image you
want to view.
On the DVD-A1XV, interlace output, progressive output and HDMI/DVI
output signals are each processed on independent video circuits. The audio
output is optimized for the selected video output, so choose the video
output you wish to view.
SQUEEZE MODE
The various modes that are selected in the VIDEO MODE are temporary.
The unit will return to the stored values when the power turns off.
AUDIO ADJUST
Depending on the connected device, the difference in the time required to
process the audio and video signals may result for example in the lips of
speaking characters not being synchronized with the sound. If this should
happen, this delay can be adjusted by offsetting the output of the audio
signals from the DVD-A1XV.
For “TV SYSTEM” and “AUDIO ADJUST” selected at “VIDEO MODE”,
the change in the setting is stored in the memory. The same setting is
set when the power is turned off then back on.
“PICTURE MODE” and “SQUEEZE MODE” selected at “VIDEO MODE”
are temporary changes. The settings return to those stored in the
memory as the default settings when the power is turned off then back
on.
Main unit
VIDEO MODE
PUSH ENTER
PICTURE MODE
TV SYSTEM
SQUEEZE MODE
AUDIO ADJUST
When “PICTURE MODE” is selected:
The modes described below will appear on the display.
Select the item you wish to set and press the VIDEO MODE knob to define
it. (See pages 59 ~ 62.)
STD (STANDARD)
Returns the settings to the factory default settings.
M1 (MEMORY1)
Picture quality adjustment items – M1 (MEMORY1) mode stored in the
picture quality adjustment mode.
M2 (MEMORY2)
Picture quality adjustment items – M2 (MEMORY2) mode stored in the
picture quality adjustment mode.
M3 (MEMORY3)
Picture quality adjustment items – M3 (MEMORY3) mode stored in the
picture quality adjustment mode.
M4 (MEMORY4)
Picture quality adjustment items – M4 (MEMORY4) mode stored in the
picture quality adjustment mode.
M5 (MEMORY5)
Picture quality adjustment items – M5 (MEMORY5) mode stored in the
picture quality adjustment mode.
STD(STANDARD)
M1 (MEMORY1)
M2 (MEMORY2)
M3 (MEMORY3)
M4 (MEMORY4)
M5 (MEMORY5)
4
Main unit
VIDEO MODE
PUSH ENTER
65
When “TV SYSTEM” is selected:
The modes described below will appear on the display.
Select the item you wish to set and press the VIDEO MODE knob to define
it.
PROGRESSIVE (Factory default)
The audio signals are synchronized with the progressive output.
(For component video output signals when “COMPONENT VIDEO OUT” at
“VIDEO SETUP” is set to “PROGRESSIVE”)
INTERLACED
The audio signals are synchronized with the interlaced output.
(For video output and S-video output signals, as well as for component video
output signals when “COMPONENT VIDEO OUT” at “VIDEO SETUP” is set
to “INTERLACED”)
HDMI/DVI
The audio signals are synchronized with the video signals output via the
HDMI/DVI connectors.
OTHERS
Select this when you want to view both the interlace output/progressive
output image and the HDMI/DVI output image at the same time.
The audio signals are set to the optimum timing for the interlace
output/progressive output image and the HDMI/DVI output image.
(Note, however, that the audio signals are not synchronized with the
interlace output/progressive output image and the HDMI/DVI output image.
To synchronize them, set to another position.)
INTERLACED
HDMI/DVI
PROGRESSIVE
OFF
ON
AUTO
4
Main unit
VIDEO MODE
PUSH ENTER
When “SQUEEZE MODE” is selected:
The modes described below will appear on the display.
Select the item you wish to set and press the VIDEO MODE knob to define
it.
OFF
Select this to display as full size of a 16:9 TV, regardless of the image’s size.
ON
Select this to display the image with a ratio of 4:3 at the center of a 16:9 TV,
regardless of the image’s size.
AUTO
Select this when playing back a 4:3 image, display images with a 4:3 aspect
ratio in the center of a 16:9 TV.
When “AUDIO ADJUST” is selected:
The currently set time is shown on the display.
To change the set time, turn the VIDEO MODE knob, then press the knob.
Settable in units of 10 msec between –30 msec and +200 msec.
(+ direction: delay the sounds in the picture.)
The setting is reset to the default value (0 msec) when the “TV SYSTEM”
setting at “VIDEO SETUP” is switched.
TIME: 0msec
OTHERS
TIME: +10msec
66
4
Press the OPEN/CLOSE button.
Main unit Remote control unit
OPEN/CLOSEOPEN/CLOSE
OPEN/
CLOSE
1
2
3
Press the OPEN/CLOSE button to open the disc tray.
Set the disc in the disc tray.
Main unit Remote control unit
OPEN/CLOSEOPEN/CLOSE
OPEN/
CLOSE
PLAY STOP
OPEN/ CLOSE
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-A1XV
STILL / PAUSE
PURE
DIRECT
SELECT
VIDEO MODE
PUSH ENTER
FORMATSELECT
HDMI / DVI SUPER
AUDIO CD
SET UP
ON / STANDBY
2, 4 53
1
1
SELECT FORMAT NTSC/PAL
AUDIOSUBTITLE
ANGLE
H
D
M
I/D
V
I
O
P
E
N
/
S
U
P
E
R
A
U
DIO
C
L
O
S
E
C
D
SE
T
U
P
P
R
O
G
R
A
M
/D
IR
E
C
T
C
LE
A
R
C
A
LL
S
EA
R
C
H
M
O
D
E
D
IS
P
L
A
Y
TO
P
M
EN
U
R
E
T
U
R
N
M
E
N
U
S
K
IP
S
LO
W
/S
E
A
R
C
H
P
LA
Y
ST
IL
L/P
A
U
S
E
S
T
O
P
B
A
C
K
LIG
H
T
P
O
W
ER
O
F
F
P
O
W
E
R
O
N
1
5
2, 4
6
7
13
PLAYBACK
(1) Playback
Turn on the power.
•Press the power button, the power indicator lights
green and the power turns on.
When pressed again, the power turns off and indicator
is off.
In the standby mode (the power indicator lights red),
press the ON/STANDBY button on the main unit or
POWER ON button on the remote control unit (RC-993).
ON / STANDBYON / STANDBY
Main unit
(Green)
ON / STANDBYON / STANDBY
Main unit
Remote control unit
POWER ON
(Red)
67
Apple
6
7
Use the cursor buttons (, ª, 0 and 1) to select the
desired item.
For some discs there is a second menu screen. If so,
press the
9 button to display the next menu screen.
(See the disc’s jacket.)
The cursor buttons (, ª,
0 and 1) do not work for
video CDs. Use the number buttons to select the
desired item.
Press the ENTER button.
The desired item is selected and playback starts.
•You can return to the menu screen by pressing the TOP
MENU/MENU button while the DVD is playing, though
this depends on the disc.
•Press the RETURN button during playback of a video CD
to return to the menu screen.
Remote control unit
Example: When “Apple” is
selected
If appears on the TV screen while buttons are being
operated, that operation is not possible on the DVD-A1XV or
with that disc.
Set the disc in the disc guide.
Do not place more than one disc in the disc tray.
The disc keeps turning while the menu screen is displayed
on the TV screen.
NOTES:
TOP MENU
Apple
Orange
Peach
Banana
Strawberry
Pineapple
5
Press the PLAY button.
For many interactive DVDs and video CDs with playback
control, a menu screen appears. In this case use the
procedure in step 6 to select the desired item.
Interactive DVDs are DVDs including multiple angles,
stories, etc.
Main unit Remote control unit
PLAYPLAY
PLAY
Remote control unit
TOP MENU
Apple
Orange
Peach
Banana
Strawberry
Pineapple
1. Opening
2. 1st movement
3. 2nd movement
4. 3rd movement
5. Ending
Example: For DVDs with menu
screens
Example: For video CDs with
playback control
68
PLAY STOP
OPEN/ CLOSE
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-A1XV
STILL / PAUSE
PURE
DIRECT
SELECT
VIDEO MODE
PUSH ENTER
FORMATSELECT
HDMI / DVI SUPER
AUDIO CD
SET UP
ON / STANDBY
STILL/PAUSE button
(2) Stopping Playback
During playback, press the STOP button on the main unit or the remote
control unit, playback stops and wall paper is displayed.
When “AUTO POWER MODE” is selected after 30 minutes in the stop
mode, the DVD-A1XV’s power automatically turns off and the standby mode
is set. (Auto Power Off) (See pages 54, 56.)
<Resume play memory function (DVD only)>
•With the DVD-A1XV, when the STOP button is pressed, that position is
stored in the memory. At this time, “
1” flashes on the display. When the
PLAY button is pressed after pressing the STOP button, playback resumes
from the position at which it was stopped. The resume play memory
function is cancelled if the disc tray is opened or the STOP button is
pressed a second time.
STOPSTOP
STOP
The resume play memory function only works for
discs for which the elapsed time is shown on the
display during playback.
Main unit Remote control unit
Remote control unit
Remote control unit
(3) Playing Still Pictures (Pausing)
During playback, press the STILL/PAUSE button on the main unit or the
remote control unit.
•Press the PLAY button to resume normal playback.
STILL/PAUSE
(4) Forward/Reverse Searching
During playback, press one of the SLOW/SEARCH buttons on the main unit
or the remote control unit.
6 : Reverse direction
7 : Forward direction
•When pressed again, the search speed increases.
•Variable in 4 steps for Super audio CDs and CDs, 7 steps for DVD audio,
DVD video and video CD discs.
•Press the PLAY button to resume normal playback.
SLOW/SEARCH
NOTE:
In some cases the menu screen may reappear
when one of the SLOW/SEARCH buttons is
pressed during menu playback on a video CD.
A-BREPEAT
SELECT FORMAT NTSC/PAL
AUDIOSUBTITLE
ANGLE
H
D
M
I/D
V
I
O
P
EN
/
S
U
P
E
R A
U
D
IO
C
LO
S
E
C
D
S
ET
U
P
P
R
O
G
R
A
M
/D
IR
EC
T
C
L
E
AR
CA
LL
S
EA
R
C
H
M
O
D
E
P
A
G
E
D
IS
P
L
A
Y
T
O
P
M
E
N
U
R
ET
U
R
N
M
E
N
U
S
K
IP
S
L
O
W
/S
E
A
R
C
H
P
LA
Y
S
TIL
L/P
A
U
S
E
S
T
O
P
B
A
C
K
LIG
H
T
STOP button SKIP buttons
STILL / PAUSE
Main unit
Main unit
SLOW/SEARCH buttons
NOTE:
The resume play memory function does not work
during menu playback of DVD discs.
SLOW/SEARCH buttons
Number buttons
STILL/PAUSE button
SKIP buttons
STOP button
SEARCH MODE button
ENTER button
69
(5) Skipping to the Beginning of Chapters or Tracks
Cueing using the SKIP buttons
During playback, press one of the SKIP buttons on the main unit or the
remote control unit.
8 : Reverse direction (PREVIOUS)
9 : Forward direction (NEXT)
•A number of chapters or tracks equal to the number of times the button is
pressed is skipped.
When the SKIP
8 button is pressed once, the pickup returns to the
beginning of the currently playing chapter or track.
SKIP
NOTE:
In some cases the menu screen may reappear
when one of the SKIP buttons is pressed during
menu playback on a video CD.
Playing position
Chapter/Track Chapter/Track Chapter/Track Chapter/Track
Reverse direction
,/
Forward direction (direction of playback)
(6) Playing Frame by Frame (for DVD-videos and video CDs only)
During playback, press the STILL/PAUSE button on the main unit or the
remote control unit.
The picture moves forward one frame each time the button is pressed.
•Press the PLAY button to resume normal playback.
•With DVD audio discs, forward frame-by-frame skipping is only possible for
the video part.
(7) Slow Playback (for DVD-videos and video CDs only)
In the still mode, press one of the SLOW/SEARCH buttons on the main unit
or the remote control unit.
6 : Reverse direction
7 : Forward direction
•When pressed again, the slow play speed increases.
For video CDs there are three steps.
•Press the PLAY button to resume normal playback.
•With DVD audio discs, the forward slow play function can only be used
with the video part.
NOTE:
Reverse slow play is not possible on video CDs.
Main unit Remote control unit
Cueing using the number buttons
Press the SEARCH MODE button during playback.
The search mode switches each time the button is pressed.
For DVD audio discs : Group Æ Track Æ (Group) Æ
For DVD video discs : Title Æ Chapter Æ (Title) Æ
For Super audio CDs, CDs and video CDs : Track only
The search mode set by pressing the SEARCH MODE button is stored
in the memory until the button is pressed again.
However, the search mode returns to the default mode when the power
is turned off.
Use the number buttons to input the number to be played.
NOTE:
Some DVD audio, DVD video and video CD discs
do not operate as described in this manual due to
the intentions of the discs’ producers.
Remote control unit
SEARCH MODE
Remote control unit
Remote control unit
STILL/PAUSE
SLOW/SEARCH
STILL / PAUSE
Main unit
Main unit
Remote control unit
70
(8) Selecting the still image (only for DVD-audios)
During playback, press the PAGE + or PAGE – button on the remote control
unit.
For DVD audio discs with still images, the desired image can be selected.
On some discs the image cannot be selected due to the intentions of the
discs’ producers.
Remote control unit
PAGE
(9) Playing bonus groups (only for DVD-audios)
In the stop mode, press the SEARCH MODE button on the remote
control unit to set the search mode to “GROUP”.
Remote control unit
SEARCH MODE
1
Use the number buttons to input the bonus group number.
2
Remote control unit
Use the number buttons on the remote control unit to input the
password (4 digits), then press the ENTER button.
Playback starts from the first track in the specified group.
Remote control unit
3
In some cases the password must be input at the menu screen. In these cases, follow the instructions on the screen.
Once the password is input, the disc can be played as many times as you want until it is removed.
If you make a mistake when inputting the password, press the CLEAR button on the remote control unit.
71
14
PLAYING REPEATEDLY
2 Use this function to play your favourite audio or video sections repeatedly.
Playing Repeatedly (Repeat Playback)
1
In the play mode, press the REPEAT button.
The display on the TV screen switches each time the button is
pressed, and the corresponding repeat play mode or normal
playback mode is set.
To return to normal playback:
Return to normal playback by pressing the REPEAT button until “REPEAT OFF” appears on the TV screen.
REPEAT
Remote control unit
TRACK REPEAT
GROUP REPEAT
REPEAT OFF
Normal playback
•Track repeated
Repeat playback cancelled
w For DVD video discs
CHAPTER REPEAT
TITLE REPEAT
REPEAT OFF
Normal playback
Chapter repeated
e For video CDs, Super audio CDs and
music CDs
TRACK REPEAT
DISC REPEAT
REPEAT OFF
Normal playback
•Track repeated
•Group repeated Title repeated
Repeat playback cancelled
Entire disc repeated
Repeat playback cancelled
q For DVD audio discs
72
Playing a Certain Section Repeatedly (A-B Repeat Playback)
1
2
During playback, press the A-B button.
This sets start point A.
Press the A-B button again.
This sets end point B, and repeat playback of the A-B section
starts.
A TO B SET A
A TO B SET B
To return to normal playback:
Press the A-B button until “A TO B CANCELED” appears on the TV screen.
NOTES:
Repeat playback may not work for some DVDs.
The repeat playback and A-B repeat playback functions will not work for DVDs and video CDs for which the elapsed time is not
shown on the display during playback.
In some cases, subtitles may not be displayed near the A and B points during A-B repeat playback.
Remote control unit
A-B
Remote control unit
A-B
73
15
PLAYING TRACKS IN THE DESIRED ORDER
2 Use this function with DVD-AUDIO discs, video CDs, Super audio CDs and music CDs to play the tracks in the desired order.
2 This function does not affect with DVD-VIDEO discs.
1
2
3
In the stop mode, press the PROGRAM/DIRECT
button once.
The program selection screen appears.
Use the number buttons to select the track number
you want to program.
EX: To program track 5 and track 12
•Press the “5”.
•Press the “+10” and “2”.
•With DVD-audio, group numbers can be specified
and programmed. Bonus tracks, however, cannot
be programmed.
Press the PLAY button.
Playback of the tracks in the programmed order
begins.
To return to normal playback:
Press the STOP button to stop programmed playback, then press the PROGRAM/DIRECT button.
Now press the PLAY button to start normal playback from the beginning of the disc.
To clear tracks from the program:
Press the STOP button. The program play screen appears. Press the CLEAR button to clear the last track in the program.
To clear the entire program:
The entire program is cleared when the power is turned off or the disc is ejected.
To check the programmed contents, press the CALL button in the stop mode. The programmed contents are displayed step by
step.
Up to 20 tracks can be programmed.
SELECT FORMAT NTSC/PAL
AUDIOSUBTITLE
ANGLE
H
D
M
I/D
V
I
O
P
E
N
/
S
U
P
ER
A
U
D
IO
C
LO
S
E
C
D
S
ET
U
P
P
R
OG
R
A
M
/D
IR
EC
T
C
LE
A
R
C
A
LL
S
E
A
R
C
H
M
O
D
E
D
IS
P
L
A
Y
T
O
P
M
EN
U
RE
T
U
R
N
M
E
N
U
S
K
IP
S
L
O
W
/S
EA
R
C
H
P
L
A
Y
S
T
IL
L/P
A
U
S
E
S
T
O
P
B
A
C
K
LIG
H
T
2
3
1
PROGRAM
/DIRECT
Remote control unit
Main unit Remote control unit
PLAYPLAY
PLAY
Remote control unit
PLAY STOP
OPEN/ CLOSE
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-A1XV
STILL / PAUSE
PURE
DIRECT
SELECT
VIDEO MODE
PUSH ENTER
FORMATSELECT
HDMI / DVI SUPER
AUDIO CD
SET UP
ON / STANDBY
3
PROGRAM
INPUT: 0-9, +10 CLEAR :CLEAR BUTTON
NO. TRACK
1
MODE : NORMAL TOTAL TIME : - - : - -
PROGRAM
INPUT: 0-9, +10 CLEAR :CLEAR BUTTON
NO. TRACK
1 0 5
2 1 2
3 _ _
MODE : NORMAL TOTAL T IME : 1 0 : 3 5
74
16
PLAYING TRACKS IN THE RANDOM ORDER
2 Use this function with video CDs, Super audio CDs and music CDs to play the tracks in random order.
With DVD-AUDIO discs, random playback is performed within the selected group.
2 This function does not affect with DVD-VIDEO discs.
1
2
In the stop mode, press the RANDOM button.
The random play screen appears.
Press the PLAY button.
The tracks start playing in random order.
Random playback is not possible for some discs.
To return to normal playback:
Press the STOP button to stop random playback, then press the RANDOM button once.
PLAY STOP
OPEN/ CLOSE
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-A1XV
STILL / PAUSE
PURE
DIRECT
SELECT
VIDEO MODE
PUSH ENTER
FORMATSELECT
HDMI / DVI SUPER
AUDIO CD
SET UP
ON / STANDBY
2
MARKERRANDOM DIMMERZOOM
PICT ADJ.SET UP MEMORY
A-BREPEAT
SELECT
SELECT FORMAT NTSC/PAL
AUDIOSUBTITLE
ANGLE
H
D
M
I/D
V
I
O
P
E
N
/
S
U
P
E
R
A
U
D
IO
C
LO
S
E
CD
S
E
T
U
P
P
R
O
G
R
A
M
/D
IR
EC
T
C
LE
A
R
C
A
L
L
S
E
A
R
C
H
M
O
D
E
P
A
G
E
P
IC
T
U
R
E
A
D
J
U
S
T
P
U
R
E
D
IR
E
C
T
D
IS
P
LA
Y
T
O
P
M
E
N
U
R
ET
U
R
N
M
E
N
U
S
K
IP
S
L
O
W
/S
E
A
R
C
H
P
LA
Y
S
T
IL
L
/P
A
U
S
E
S
T
O
P
B
A
C
K
LIG
H
T
1
2
2
2
RANDOM
Remote control unit
Main unit Remote control unit
PLAYPLAY
PLAY
RANDOM ON
Remote control unit
for DVD audio discs
SEARCH MODE
For DVD audio discs:
When operating from the remote control unit, use
the buttons to input the number of the group you
want to play.
Remote control unit
75
GROUP 01/02
GROUP ELAPSED
TRACK 01 /10
0 : 00 : 01
AUDIO 1/1 : PPCM 5.1 ch/ 96 kHz/24 BIT
GROUP REMAIN 0 : 57 : 59
TRACK ELAPSED 0 : 00 : 01
TRACK REMAIN 0 : 05 : 59
17
USING THE ON-SCREEN DISPLAY
2 Use this function to display and change information on the disc
(titles, chapters, time, etc.)
1
2
3
In the play mode, press the DISPLAY button.
The On-Screen Display appears.
The picture on the TV screen switches each time the button is pressed.
The items displayed differ from disc to disc.
Use the and ª cursor buttons to select the item you wish to change.
The selected item is displayed with a yellow frame.
q For DVD audio discs
The elapsed time of groups and tracks can be selected.
w For DVD video discs
The elapsed time of titles, titles and chapters can be selected.
e For video CDs, Super audio CDs and music CDs
The elapsed time of tracks, tracks can be selected.
q Changing the elapsed time
Input using the number buttons, then press the ENTER button.
Example: For 1 minute 26 seconds / “00126” :
DVD/SUPER AUDIO CD
“0126” : VIDEO CD/CD
w Changing the title, track or chapter
For DVDs
Input using the number buttons, then press the ENTER button.
(For some discs it is not possible to change the title or chapter.)
For video CDs, Super audio CDs and music CDs
Input using the number buttons. Playback starts from that track.
SELECT FORMAT NTSC/PAL
AUDIOSUBTITLE
ANGLE
H
D
M
I/D
V
I
O
P
E
N
/
S
U
P
E
R
A
U
D
IO
CL
O
S
E
C
D
SE
T
U
P
P
R
O
G
RA
M
/D
IR
E
C
T
C
LEA
R
C
A
LL
S
EA
R
C
H
M
O
D
E
D
IS
P
LA
Y
TO
P
M
EN
U
R
ET
U
R
N
M
E
N
U
B
A
C
K
LIG
H
T
3
3
1
2
DISPLAY
Remote control unit
Remote control unit
Remote control unit
Normal playback screen
Disc information screen
Disc information screen
Example: For DVD video discs
Normal playback screen
Disc information screen
Disc information screen
Example: For video CDs, Super audio
CDs and music CDs
TRACK 05/ 10
SINGLE ELAPSED
02 : 11
SINGLE REMAIN 03 : 17
TOTAL ELAPSED 26 : 15
TOTAL REMAIN 32 : 05
Normal playback screen
Disc information screen
Remote control unit
Some Super audio CDs contain text
data. In this case, the album title and
artist are displayed in the stop mode,
and the title of the currently playing
track is displayed in the play mode.
Example: For DVD audio discs
TITLE 01/10
TITLE ELAPSED
CHAPTER 01 /10
00 : 00 : 01
SUBTITLE OFF
AUDIO 1/2 : DOLBY D3/2.1 ENGLISH
TITLE REMAIN 01 : 10 : 59
CHAPTER ELAPSED 00 : 00 : 01
CHAPTER REMAIN 00 : 40 : 59
76
NOTES:
•With some discs it is not possible to change the audio language during playback. In such cases, select from the DVD menu. (See
page 79.)
If the desired language is not set after pressing the and ª cursor buttons several times, the disc does not include that language.
The language selected in the default settings (See page 35.) is set when the power is turned on and when the disc is replaced.
18
USING THE MULTIPLE AUDIO, SUBTITLE AND ANGLE FUNCTIONS
2 With DVDs containing multiple audio language signals, the audio language can be switched during playback.
1
2
During playback, press the AUDIO button.
The current audio language number is displayed.
Use the and ª cursor buttons to select the desired language.
The display turns off when the AUDIO button is pressed.
AUDIO 1/3 :DOLBY D3/2.1 ENGLISH
AUDIO 2/3 :DOLBY D3/2.1 FRENCH
Switching the Audio Language (Multiple Audio Function)
AUDIO
Remote control unit
Remote control unit
77
NOTES:
If the desired language is not set after pressing the and ª cursor buttons several times, the disc does not include that language.
The subtitle language set with the default settings (See pages 35, 36.) is set when the power is turned on and when the disc is
replaced.
If that language is not included on the disc, the disc’s default language is set.
When the subtitle language is changed, several seconds may be required for the new language to appear.
When a disc supporting the closed caption is played, the subtitle and the closed caption may overlap each other on the TV
monitor. In this case, turn the subtitle off.
2 With DVDs containing multiple subtitle language signals, the subtitle language can be switched during playback.
1
2
During playback, press the SUBTITLE button.
The current subtitle language number is displayed.
Use the and ª cursor buttons to select the desired language.
The display turns off when the SUBTITLE button is pressed.
SUBTITLE : 01/ 0 3 ENGLISH
SUBTITLE : 02/03 FRENCH
Switching the Subtitle Language (Multiple Subtitle Function)
SUBTITLE
Remote control unit
Remote control unit
78
Switching the Angle (Multiple Angle Function)
2 With DVDs containing multiple angle signals, the angle can be switched during playback.
1
2
During playback, press the ANGLE button.
The current angle number is displayed.
Use the and ª cursor buttons to select the desired angle.
The display turns off when the ANGLE button is pressed.
3/5
NOTES:
The multiple angle function only works with discs on which multiple angles are recorded.
“ANGLE” lights on the main unit’s display when playing a section recorded in the multi-angle mode.
•At scenes where multiple angles are recorded, the angle can be switched.
ANGLE
Remote control unit
Remote control unit
4/5
79
19
USING THE MENUS
2 For DVDs containing multiple titles, the desired title can be selected and played from the top menu.
1
2
During playback, press the TOP MENU button.
The top menu appears.
Use the cursor or number buttons to select the desired title.
If you select the title number using the number buttons, skip step
3 below.
Press the ENTER button.
Playback starts.
•Playback also starts if the PLAY button is pressed.
TOP MENU
Apple
Orange
Peach
Banana
Strawberry
Pineapple
Using the Top Menu
3
Example:
Example:
When “Orange” is selected
TOP MENU
Apple
Orange
Peach
Banana
Strawberry
Pineapple
Remote control unit
Remote control unit
TOP MENU
Remote control unit
Remote control unit
80
2 Some DVDs include special menus called DVD menus.
For example, DVDs with complex contents may contain guide menus, and DVDs with multiple languages may contain audio and
subtitle language menus.
These menus are called “DVD menus”.
Here we describe the general procedure for using DVD menus.
Using the DVD Menu
1
2
During playback, press the MENU button.
The DVD menu appears.
Use the cursor or number buttons to select the desired item.
If you select the item using the number buttons, skip step 3
below.
Press the ENTER button.
The selected item is set.
If more menus appear, repeat steps 2 and 3.
DVD MENU
1. SUB TITLE
2. AUDIO
3. ANGLE
3
Example:
Example:
“AUDIO” is selected
DVD MENU
1. SUB TITLE
2. AUDIO
3. ANGLE
Remote control unit
MENU
Remote control unit
Remote control unit
Remote control unit
81
20
MARKING SCENES YOU WANT TO SEE AGAIN
2 Set marks at scenes you want to see again so that you can start playback from the marked position whenever you want.
1
2
During playback, press the MARKER button.
The marker screen appears.
Use the
0 and 1 cursor buttons to select the “
marks.
•“ ” is displayed if the mark is not set.
Press the ENTER button at the scene you want to
mark.
•A number is displayed.
Up to five marks can be set.
(To select another marker, use the cursor buttons
(
0, 1).)
Setting Marks (for DVD-audios and DVD-videos only)
MARKER
Remote control unit
Remote control unit
Calling Out Marked Scenes and Clearing Marks
3
Use the 0 and 1 cursor buttons to select the marker number and
press the ENTER button.
If the marker screen is not displayed during playback, press the
MARKER button to display it.
To clear the marker display:
Press the MARKER button.
To clear a marker:
Use the
0
and
1
cursor buttons to select a marker number and press the
CLEAR button.
•You can clear existing markers, but they are restored when you open
the disc tray or switch the unit to standby.
Remote control unit Remote control unit
NOTES:
All the markers added with this unit are cleared when the unit is switched to standby or the disc tray is opened.
Depending on where the marker is set, subtitles may not be displayed.
82
NOTES:
Zooming is not possible with some discs.
The zoom function may not work properly at some scenes.
Zooming is not possible at the top menu or the menu screen.
•When the picture is enlarged, the picture quality may be decreased and the picture may be blurred.
21
PLAYING IN THE ZOOM MODE
1
In the play or pause mode, press the ZOOM button.
The zoom rate increases each time the ZOOM button is pressed.
For DVD video discs and video CDs:
OFF Æ x1.5 Æ x2 Æ x4 Æ OFF
For DVD audio discs:
OFF Æ x2 Æ x4 Æ OFF
ZOOM
Remote control unit
2
Use the cursor buttons (ª, , 0 and 1) to move the zoomed picture.
Remote control unit
83
22
PLAYING MP3
PLAY STOP
OPEN/ CLOSE
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-A1XV
STILL / PAUSE
PURE
DIRECT
SELECT
VIDEO MODE
PUSH ENTER
FORMATSELECT
HDMI / DVI SUPER
AUDIO CD
SET UP
ON / STANDBY
1 31
SELECT FORMAT NTSC/PAL
AUDIOSUBTITLE
ANGLE
H
D
M
I/D
V
I
O
P
E
N
/
S
U
P
E
R
A
U
D
IO
C
L
O
S
E
C
D
S
E
T
U
P
P
R
O
G
R
A
M
/D
IR
E
C
T
C
L
E
A
R
C
A
L
L
S
E
A
R
C
H
M
O
D
E
D
IS
P
L
A
Y
T
O
P
M
E
N
U
R
E
T
U
R
N
M
E
N
U
S
K
IP
S
LO
W
/S
E
A
R
C
H
P
L
A
Y
S
T
IL
L/P
A
U
S
E
S
T
O
P
B
A
C
K
L
IG
H
T
3
1
2, 3
Listening to MP3 CD, CD-Rs and CD-RWs
2 There are many music distribution sites on the internet from which music files in MP3 format can be downloaded. Music downloaded
as instructed on the site and written onto a CD-R/RW disc can be played on the DVD-A1XV.
If music recorded on commercially available music CDs is converted on a computer into MP3 files using an MP3 encoder (conversion
software), the data on a 12 cm CD is reduced into about 1/10 the amount of the original data. Thus, when written in MP3 format, the
data of about 10 music CDs can fit onto the one CD-R/RW disc. The one CD-R/RW disc can contain over 100 tracks.
Values when 5-minute tracks are converted with a standard bit rate of 128 kbps into MP3 files and using a CD-R/RW disc with a
capacity of 650 MB.
Uses of recordings you have made other than for your personal enjoyment are not permitted under the Copyright Law
without permission of the copyright holder.
1
Load the CD-R/RW disc on which the MP3 format
music files have been written into the DVD-A1XV.
(See page 30.)
When the disc is loaded in the DVD-A1XV, the disc
information screen appears.
If there are multiple folders, proceed to step 2.
If there are no folders on the disc, proceed to step
3.
DISC INFORMATION
0ROOT
1FOLDER1
2FOLDER2
3FOLDER3
4FOLDER4
5FOLDER5
ROOT
PLAY MODE FOLDER
SINGLE ELAPSED: --:--
SELECT :
DECISION:ENTER BUTTON
FOLDER1
FOLDER2
FOLDER3
FOLDER4
FOLDER5
DISC INFORMATION
0••
1MP3 _ 01
2MP3 _ 02
3MP3 _ 03
4MP3 _ 04
5MP3 _ 05
ROOT
PLAY MODE FOLDER
SINGLE ELAPSED: --:--
SELECT :
DECISION:ENTER BUTTON
2
Use the cursor buttons (
ª
,
,
0
and
1
) to select the
folder containing the file(s) you want to play, then
press the ENTER button.
To change the folder
Use the cursor buttons to select “ROOT”, then
press the ENTER button. The screen in step 1
reappears. Select the desired folder.
Remote control unit
Remote control unit
Main unit
Remote control unit
OPEN/CLOSEOPEN/CLOSE
OPEN/
CLOSE
84
FOLDER1
FOLDER2
FOLDER3
FOLDER4
FOLDER5
DISC INFORMATION
0••
1MP3 _ 01
2MP3 _ 02
3MP3 _ 03
4MP3 _ 04
5MP3 _ 05
ROOT
PLAY MODE FOLDER
SINGLE ELAPSED: --:--
SELECT : DECISION:ENTER BUTTON
3
Use the
and
ª
cursor buttons to select the MP3
file you want to play, then press the PLAY button or
ENTER button.
Playback starts.
The display can be switched between the single
elapsed time and the single remaining time and
the track name by pressing the DISPLAY button.
Programmed playback is not possible with MP3
discs.
To change the MP3 file
Press the STOP button, then use the
and
ª
cursor buttons to reselect the desired MP3 file.
To set the random play mode
In the stop mode, press the RANDOM button.
Then press the PLAY button or ENTER button.
To set the repeat mode
The repeat mode changes each time the REPEAT
button is pressed.
To return to the initial disc information screen
Press the STOP button, use the cursor button to
select “ROOT”, then press the ENTER button.
The screen in step 1 reappears.
NOTES:
The DVD-A1XV is compatible with the “MPEG-1 Audio Layer 3” standards (sampling frequency of 44.1 kHz or 48 kHz). It is not
compatible with such other standards as “MPEG-2 Audio Layer 3”, “MPEG-2.5 Audio Layer 3”, MP1, MP2, etc.
It may not be possible to play some CD-R/RW discs due to disc properties, dirt, warping, etc.
The digital signals output when playing MP3 files are MP3 signals converted into PCM, regardless of whether the audio output
presetting is set to “NORMAL” or “PCM”. The signals are output with the same sampling frequency as that of the music source.
In general, the higher an MP3 file’s bit rate, the better the sound quality. On the DVD-A1XV, we recommend using MP3 files
recorded with bit rates of 128 kbps or greater.
MP3 files may not be played in the expected order, since the writing software may change the position of the folders and the
order of the files when writing them on the CD-R/RW.
•Programmed playback are not possible with MP3 discs.
When writing MP3 files on CD-R/RW discs, select “ISO9660 level 1/ level 2” as the writing software format. This may not be
possible with some types of writing software. For details, refer to the writing software’s usage instructions.
The number of files playable with the DVD-A1XV is approximately 600 or less.
•With the DVD-A1XV it is possible to display folder names and file names on the screen like titles. The DVD-A1XV can display up
to 8 characters, consisting of numbers, capital letters, and the “_” (underscore) mark.
If recorded in a format other than “ISO9660 level 1”, normal display and playback may not be possible. In addition, folder and file
names including other symbols will not be displayed properly.
Be sure to add the extension “.MP3” to MP3 files. Files cannot be played if they have any extension other than “.MP3” or if they
have no extension. (with Macintosh computers, MP3 files can be played by adding the extension “.MP3” after the file name
consisting of up to 8 capital or numbers and recording the files on the CD-R/RW.)
Do not apply stickers, tape, etc., to either the label side or the signal side of CD-R/RW discs. If adhesive gets on the surface of
a disc, the disc may get stuck inside the DVD-A1XV and be impossible to eject.
The DVD-A1XV is not compatible with packet write software.
The DVD-A1XV is not compatible with ID3-Tag.
The DVD-A1XV is not compatible with play lists.
The DVD-A1XV is not compatible with MP3 PRO.
Do not play CD-R/RW discs containing any files other than music CD files (in CDDA format), WMA, MP3 and JPEG files. Doing
so may result in malfunction or damage, depending on the type of file.
FOLDER TRACK REPEAT
FOLDER REPEAT
PLAYPLAY
Remote control unit
PLAY
Remote control unit
Main unit
86
24
PLAYING STILL PICTURE FILES (JPEG FORMAT)
2
JPEG files stored on Kodak picture CDs, Fujicolor CDs, CD-Rs and CD-RWs can be played as a slide show and enjoyed on the DVD-A1XV.
Playing still picture
1
q Load the Kodak picture CD into the DVD-A1XV.
When the disc is loaded, a slide show of the still pictures begins automatically.
The slide show continues until the STOP button is pressed.
w Load the Fujicolor CD into the DVD-A1XV.
When the disc is loaded, a maximum of 9 still pictures are displayed automatically.
•Press the PLAY or ENTER button , the slide show begin. The slide show continues until the STOP button is pressed.
PLAY STOP
OPEN/ CLOSE
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-A1XV
STILL / PAUSE
PURE
DIRECT
SELECT
VIDEO MODE
PUSH ENTER
FORMATSELECT
HDMI / DVI SUPER
AUDIO CD
SET UP
ON / STANDBY
1 31
SELECT FORMAT NTSC/PAL
AUDIOSUBTITLE
ANGLE
H
D
M
I/D
V
I
O
P
E
N
/
S
U
P
E
R
A
U
D
IO
C
L
O
S
E
C
D
S
E
T
U
P
P
R
O
G
R
A
M
/D
IR
E
C
T
C
LE
A
R
C
A
L
L
S
E
A
R
C
H
M
O
D
E
D
IS
P
LA
Y
T
O
P
M
E
N
U
R
E
T
U
R
N
M
E
N
U
S
K
IP
S
LO
W
/S
E
A
R
C
H
P
L
A
Y
S
T
IL
L/P
A
U
S
E
S
T
O
P
B
A
C
K
L
IG
H
T
2, 3
1
3
2 Kodak picture CDs and Fujifilm Fujicolor CDs can be played on the DVD-A1XV.
When a CD (recording still picture) is played, the photographs on the CD can be
displayed on a TV.
(“Picture CD” and “Fujicolor CD” are service by which photographs taken on
conventional silver film cameras are converted into digital data and written on
CDs. For details on Kodak picture CD, contact a store that offers Kodak
development services. For details about Fujicolor CDs, please contact a store
offering Fuji Photo Film developing services.)
PLAY STOP
OPEN/ CLOSE
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-A1XV
STILL / PAUSE
PURE
DIRECT
SELECT
VIDEO MODE
PUSH ENTER
FORMATSELECT
HDMI / DVI SUPER
AUDIO CD
SET UP
ON / STANDBY
1-q, w 1-w 1-q, w1-q, w
MARKERRANDOM DIMMERZOOM
PICT ADJ.SET UP MEMORY
A-BREPEAT
SELECT
SELECT FORMAT NTSC/PAL
AUDIOSUBTITLE
ANGLE
H
D
M
I/D
V
I
O
P
EN
/
S
U
P
ER
A
U
D
IO
C
L
O
S
E
C
D
SE
T
U
P
P
R
O
G
R
A
M
/D
IR
E
C
T
C
LE
A
R
C
A
LL
S
E
A
R
C
H
M
O
D
E
P
A
G
E
P
IC
T
U
R
E
A
D
J
U
S
T
P
U
R
E
D
IR
E
C
T
D
IS
P
L
A
Y
T
O
P
M
E
N
U
R
ETU
R
N
M
E
N
U
S
K
IP
S
L
O
W
/S
E
A
R
C
H
P
L
A
Y
S
TIL
L
/P
A
U
S
E
S
T
O
P
B
A
CK
L
IG
H
T
P
OW
ER
O
FF
P
O
W
ER
O
N
1-q, w
1-q, w
1-w
1-w
Playing still pictures stored on CD-Rs/RWs
1
Load the CD-R/RW on which the still pictures have been written into
the DVD-A1XV.
When the disc is loaded in the DVD-A1XV, the disc information
screen appears.
If there are multiple folders, proceed to step 2.
If there are no folders on the disc, proceed to step 3.
DISC INFORMATION
0ROOT
1JPEG1
2JPEG2
3JPEG 3
4JPEG 4
5JPEG 5
ROOT
PLAY MODE FOLDER
SINGLE ELAPSED: --:--
SELECT :
DECISION:ENTER BUTTON
87
DISC INFORMATION
0••
1A
2B
3C
4D
5E
JPEG1
JPEG2
JPEG 3
JPEG 4
JPEG 5
ROOT
PLAY MODE FOLDER
SINGLE ELAPSED: --:--
SELECT :
DECISION:ENTER BUTTON
2
Use the
and
ª
cursor buttons to select the folder
containing the file(s) you want to play, then press the
ENTER button.
To change the folder
Use the cursor button to select “ROOT”, then
press the ENTER button. The screen in step 1
reappears. Select the desired folder.
DISC INFORMATION
0••
1A
2B
3C
4D
5E
JPEG1
JPEG2
JPEG 3
JPEG 4
JPEG 5
ROOT
PLAY MODE FOLDER
SINGLE ELAPSED: --:--
SELECT :
DECISION:ENTER BUTTON
3
Use the
and
ª
cursor buttons on the remote
control unit to select the still picture file from which
you want to start the slide show, then press the
PLAY button or the ENTER button on the remote
control unit.
The slide show starts.
Only the still picture files in the selected folder are
played.
Once all the still picture files in the folder have
been played, the disc information screen
reappears.
PLAYPLAY
Remote control unit
PLAY
To view several of the still pictures stored on the disc at once:
•To select and view a still picture (to start the slide show from a specific still picture), use the cursor buttons (
ª
,
,
0
and
1
) to
select the desired still picture, then press the ENTER button.
To temporarily stop the slide show:
•Press the STILL/PAUSE button.
•To resume the slide show, press the PLAY button.
To cue a still picture you want to view (from which you want to start the slide show):
During the slide show, press one of the SKIP (
8
,
9
) buttons. Press the SKIP
8
button to cue back to the previous still
picture, the SKIP
9
button to cue ahead to the next still picture.
Flipping and rotating still pictures:
•Use the cursor buttons (
ª
,
,
0
and
1
) to flip the still picture.
cursor button: The currently displayed still picture is flipped vertically.
ª
cursor button: The currently displayed still picture is flipped horizontally.
0
cursor button: The currently displayed still picture is rotate 90° counterclockwise.
1
cursor button: The currently displayed still picture is rotate 90° clockwise.
Play the image in the zoom mode.
•When the ZOOM button is pressed while playing a JPEG image (“ZOOM ON” is displayed on the screen at this time) zoom in
and zoom out using the search keys.
6
: zoom out,
7
: zoom in
When the image is zoomed, use the cursor buttons (
ª
,
,
0
and
1
) to move the zoomed picture.
Continuous playback (SLIDE SHOW) is not possible in the zoom mode.
Zooming is not possible with files that have a low resolution.
The way of switching to the next image during continuous JPEG image playback (SLIDE SHOW) can be selected.
•Preset the SEARCH MODE button on the remote control unit.
Select from SLIDE SHOW MODE:1 to MODE: 11, MODE: RAND and MODE: NONE.
Remote control unit
Remote control unit
Main unit
88
Special play modes for WMA and MP3 and JPEG files
Use the
0
and
1
cursor buttons to select the play mode, the and ª cursor buttons to select the special play mode.
FOLDER (the WMA and MP3 and JPEG files in the folder are played in order starting from the selected file)
FOLDER REPEAT (all the WMA and MP3 and JPEG files in the folder are played repeatedly starting from the selected file)
DISC (all the WMA and MP3 and JPEG files on the disc are played in order starting from the selected file)
DISC REPEAT (all the WMA and MP3 and JPEG files on the disc are played repeatedly starting from the selected file)
RANDOM ON (all the WMA and MP3 and JPEG files in the folder are played in random order starting from the selected file)
TRACK REPEAT (the select WMA or MP3 or JPEG file is played repeatedly)
NOTES:
The DVD-A1XV is compatible with image data stored in JPEG format, but Denon does not guarantee that all image data stored
in JPEG format can be viewed.
Files with sizes of up to 30 Mbytes can be displayed.
It may not be possible to play some CD-Rs/RWs due to disc properties, dirt, scratches, etc.
When storing JPEG files on the CD-R/RW, set the writing program to store the files in the “ISO9660 level 1/ level 2” format.
Be sure to give JPEG files the extension “.JPG” and “.JPE”. Files with other extensions or with no extensions cannot be viewed
on the DVD-A1XV.
Do not apply stickers, tape, etc., to either the label side or the signal side of CD-R/RW discs. If adhesive gets on the surface of
a disc, the disc may get stuck inside the DVD-A1XV and be impossible to eject.
Do not play CD-R/RW discs containing any files other than music CD files (in CDDA format), WMA, MP3 and JPEG files. Doing
so may result in malfunction or damage, depending on the type of file.
JPEG files written using Macintosh computers cannot be played.
89
Check again before assuming the player is malfunctioning
25
TROUBLESHOOTING
2 Are all the connections correct ?
2 Are you following the instructions in the manual ?
2 Are the amplifier and speakers operating properly ?
If the DVD-A1XV does not seem to be functioning properly, check the table below. If this does not solve the problem, the DVD-A1XV may
be damaged. Turn off the power, unplug the power cord from the power outlet, and contact your store of purchase or nearest Denon
sales office.
Symptom PageCheck
Power does not turn on.
12~22,
25
Plug the power supply cord securely into the power outlet.
Playback does not start when PLAY
button is pressed.
Playback stops immediately.
10
11
Is there condensation on the disc or player ? (Let stand for 1 or 2 hours.)
Discs other than DVDs,SuperAudio CDs, video CDs and music CDs cannot be played.
Disc is dirty. Wipe off the dirt.
Picture does not appear.
12~22
57, 58
Check the connections.
Check that VIDEO OUT has not been set to “VIDEO OUT:OFF” or “ALL OFF” for PURE
DIRECT MODE.
Set the TV’s input to “video”.
Sound is not produced or sound quality
is poor.
12~22
46, 50,
51
16, 17,
19, 20,
16, 17,
58
57, 58
21
Check the connections.
•Properly set the input of the TV, stereo, etc.
Check the “DIGITAL OUTPUT” and “COMPRESSION” settings.
Digital signals cannot be output with Super audio CDs. Use analog or IEEE1394
connections.
•Area/layer of Super audio CD being played (MULTI/STEREO/CD) does not match amplifier
connections.
When the video output setting at “PURE DIRECT” is set to “VIDEO OUT : OFF” or “ALL
OFF”, no sound at HDMI connector.
When a device not compatible with HDMI specification Ver. 1.1 is connected via an HDMI
connector, the audio signals of DVD audio discs copyright-protected by CPPM are not
output.
Menu playback of video CD’s is not
possible.
67 Menu playback is not possible with anything but video CDs with playback control.
Picture is disturbed during the search
operation.
Some disturbance is normal.
Buttons do not operate. 67 Some operations are disabled for some discs.
No subtitles are displayed.
35, 36
Subtitles are not displayed for DVDs not containing subtitles.
Subtitles are turned off. Turn the subtitles setting on.
Audio (or subtitle) language does not
switch.
76, 77
80
The audio (or subtitle) language does not switch for discs which do not include multiple
audio (or subtitle) languages.
For some discs the audio (or subtitle) language cannot be switched when the operation to
switch it is performed, but can be switched on the menu screens.
Angle does not switch.
78 The angle cannot be switched for DVDs which do not contain multiple angles. In some
cases multiple angles are only recorded for specific scenes.
Playback does not start when the title is
selected.
52, 53 Check the “RATINGS” setting.
The password for rating level has been
forgotten.
Reset all the setting to Factory
Preset.
While the player is in the stop mode, hold the player’s SKIP
9
button and the PLAY
button down simultaneously and then hold the OPEN/CLOSE button down for longer than
3 seconds (until “INITIALIZE” disappears from the TV monitor).
The lock will be released and all default settings and picture settings will return to the
default values.
The disc is not played with the audio or
subtitle language set as the default
setting.
35~37 The disc does not play with the selected audio or subtitle language if that audio or subtitle
language is not included on that DVD.
Picture is not displayed in 4:3 (or 16:9). 43 Set the “TV ASPECT” default setting to the proper setting for the connected TV.
90
Symptom PageCheck
An image is not projected with an
HDMI/DVI connection.
25
20~22
63
20~22
57, 58
Check the HDMI/DVI connection.(Check the status of the HDMI/DVI indicators.)
Check whether the connected monitor equipment or other equipment supports HDCP. (The
DVD-A1XV will not output a video signal unless the connected equipment supports HDCP.)
Check the settings of “HDMI/DVI SELECT”.
Check whether the output format of the DVD-A1XV (HDMI/DVI FORMAT) matches the input
format of the connected equipment.
Check whether the video output setting at “PURE DIRECT” is set to “VIDEO OUT : OFF”
or “ALL OFF”.
Remote control unit does not operate.
27
27
27
27
27
Check that the batteries are inserted in the proper “<” and “>” directions.
The batteries are dead. Replace them with new batteries.
Point the remote control unit at the remote control sensor when operating it.
Operate the remote control unit within a distance of 7 meters from the remote control
sensor.
Remove the obstacle between the remote control unit and remote control sensor.
Menu screen messages for the desired
language do not display.
35~37 Check the setting of “DISC MENUS” under “LANGUAGE SETUP” in “SETUP”.
Picture and sound are interrupted with
HDMI/DVI connections.
63 When the “HDMI/DVI FORMAT” setting is set to “AUTO”, the picture or sound may be
interrupted when cables are connected or disconnected or depending on the conditions of
the connected device(s).
91
26
MAIN SPECIFICATIONS
Signal system: NTSC/PAL
Applicable discs: (1) DVD-Audio/DVD-Video discs
1-layer 12 cm single-sided discs, 2-layer 12 cm single-sided discs, 2-layer 12 cm double-sided discs
(1 layer per side)
1-layer 8 cm single-sided discs, 2-layer 8 cm single-sided discs, 2-layer 8 cm double-sided discs
(1 layer per side)
(2) Super audio CDs
Single layer 12 cm discs, Dual layer 12 cm discs, Hybrid layer 12 cm discs
(3) Compact discs (CD-DA, Video CD)
12 cm discs, 8 cm discs
S-Video output: Y output level : 1 Vp-p (75 /ohms) C output level: 0.3 Vp-p (75 /ohms)
Output connector : S connectors, 2 sets / AV 1 connector, 1 set
Video output: Output level : 1 Vp-p (75 /ohms)
Output connector : Pin jacks, 2 sets / AV 1 connector, 1 set
Component output: Y output level : 1 Vp-p (75 /ohms)
P
B/CB output level : 0.7 Vp-p (75 /ohms)
P
R/CR output level : 0.7 Vp-p (75 /ohms)
Output connector : Pin jack, 1 set / BNC jack, 1set
HDMI output: Output connector : HDMI connector, 1 set
DVI output: Output connector : DVI-D connector, 1 set
RGB output: Output level : 0.7 Vp-p (75 /ohms)
Output connector : AV 1 connector, 1 set
Audio output: Output level : 2 Vrms
2 channel (L, R) output connector : Pin jack, 1 set
AV 1 connector, 1 set
Multi channel (FL, FR, C, SW, SL, SR) output connector : Pin jack, 1 set
Audio output properties: (1) Frequency response
q DVDs (linear PCM) : 2 Hz to 22 kHz (48 kHz sampling)
:2 Hz to 44 kHz (96 kHz sampling)
:2 Hz to 88 kHz (192 kHz sampling)
w Super audio CDs : 2 Hz to 100 kHz
e CDs : 2 Hz to 20 kHz
(2) S/N ratio : 125 dB
(3) Total harmonic distortion : 0.0008 %
(4) Dynamic range : 112 dB
Digital audio output: Optical digital output : Optical connector, 1 set
Coaxial digital output : Pin jack, 1 set
DENON LINK output : DENON LINK connector, 1 set
IEEE 1394 terminal : IEEE 1394 connectors, 2 sets
Power supply: AC 230 V, 50 Hz
Power consumption: 80 W
Maximum external
dimensions: 434 (width) x 170 (height) x 432 (depth) mm (including protruding parts)
Mass: 19 kg
2 Remote control unit: RC-993
Type: Infrared pulse
Power supply: DC 4.5 V, 3 R6P/AA batteries
Design and specifications are subject to change without notice in the course of product improvement.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by Macrovision , and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
00D 511 4289 013
TOKYO, JAPAN
www.denon.com
52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon dvd a 1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Denon dvd a 1

Denon dvd a 1 Bedienungsanleitung - Deutsch, Französisch, Italienisch - 110 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info