Bedienungsanleitung Denon dvd a 1 (Seite 9 von 110) (Deutsch, Französisch, Italienisch)

138818

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

ENGLISH

(6) Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.)

AV1

✽ Set the “AUDIO SETUP” default setting

as shown below. (See page 18.)

• “DIGITAL OUT” → “PCM”

“LPCM (44.1 kHz / 48 kHz)” → “ON”

Playing DVDs with incorrect settings may

result noise that could damage your ears or

the speakers.

DVD-A1

Digital audio input connector (COAXIAL)

Digital audio input connector (OPTICAL)

(7) Connecting to a Stereo Component

AV1

DVD-A1

Stereo component

NOTES:

• When connecting to a 2-channel audio stereo device, set “AUDIO CHANNEL” under “AUDIO SETUP” at

“SETUP” to “2 CHANNEL” (see page 16). For multi-channel sources, the signals are down-mixed into two

channels (analog). (Only the front left and right channels are output for sources for which down-mixing is

prohibited.)

• Set “LPCM (44.1 kHz/48 kHz)” under “AUDIO SETUP” at “SETUP” to “OFF”. (See page 18.)

(If set to “ON”, analog audio signals converted to 48 kHz will be output for linear PCM or packed PCM

sources.)

• Set “DIGITAL OUTPUT” at “PURE DIRECT MODE” to “OFF”. (See page 29.)

(If set to “ON”, analog audio signals converted to 96 kHz/88.2 kHz will be output when playing sources

recorded at 196 kHz/176.4 kHz.)

(5) Connecting a basic 5.1-channel surround system

Analog 5.1-channel audio signals can be output from the DVD-A1.

The multichannel audio signals recorded in packed PCM can be played when an AV amplifier equipped with

analog 5.1-channel audio inputs is connected.

AV1

DVD-A1

To power outlet

Front speaker (left)

Center speaker

Front speaker (right)

Subwoofer

Surround speaker (right)

AV amplifier with 5.1-channel input

terminals

Surround speaker (left)

FRONT

SUBWOOFER

SURROUND

CENTER

NOTES:

•

For multi-channel connections, set “AUDIO CHANNEL” under “AUDIO SETUP” at “SETUP” to “MULTI

CHANNEL” and make the “SPEAKER CONFIGURATION”, “CHANNEL LEVEL” and “DELAY TIME”

settings.

• Set “LPCM (44.1 kHz/48 kHz)” under “AUDIO SETUP” at “SETUP” to “OFF”. (See page 18.)

(If set to “ON”, analog audio signals converted to 96 kHz/88.2 kHz will be output when playing sources

recorded at 196 kHz/176.4 kHz.)

• When playing DVDs that are not copyright-protected and the unit is set to output digital and analog audio

signals simultaneously, for some discs only the signals below 96 kHz for the front two channels will be

output for the analog part.

When playing DVDs that are not copyright-protected, set “DIGITAL OUTPUT” at “PURE DIRECT MODE”

to “OFF”. (See page 29.)

• When playing DVDs recorded in MPEG audio format, the audio signals are down-mixed to 2 channels for

output.

• With the DVD-A1, we recommend turning the digital output off and only outputting analog signals in order

to keep interference from the digital output circuitry to the minimum and allow you to enjoy high bit, high

sampling frequency, high quality multi-channel sound.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon dvd a 1 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon dvd a 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info