Bedienungsanleitung Denon dvd a11 (Seite 27 von 124) (Deutsch, Französisch, Italienisch)

136674

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

ENGLISH

B When “PURE DIRECT” is selected:

Turning the select knob will display the following

setting modes on the display.

NORMAL: (Factory default)

All signals out. (Stop the direct mode)

VIDEO OFF: Video signals are not output.

DIGITAL OFF: Digital signals are not output.

ALL OFF: No indicate in Display of the main unit,

and video and digital signals are not

output. (except analog audio output)

Select the item that you wish to set and press the

select knob to define it.

(Exit the setting mode automatically.)

NORM

OFF

LOFF

OFF

B When “DVI SETUP” is selected:

Turning the select knob will display the following

setting modes on the display.

DVI OFF: (Factory default)

No output the signals from DVI-D connector.

480P: Outputs the image from the DVI-D connector

at 480P.

720P: Outputs the image from the DVI-D connector

at 720P.

1080i: Outputs the image from the DVI-D connector

at 1080i.

Select the item that you wish to set and press the

select knob to define it.

When playing back a PAL-formated disc, the DVI-D

connector outputs a 576P signal.

For output of a 480P, 720P or 1080i signal, be sure to

set the TV TYPE option to NTSC. (See page 18.)

DVI OFF

480P

720P

1080i

B When “DVI BK (Black) LEVEL” is selected:

Turning the select knob will display the following

setting modes on the display.

NORMAL: (Factory default)

Signals are output from the DVI-D terminal with a

digital RGB video level (data range) of 16 (black) to

235 (white).

ENHANCED:

Signals are output from the DVI-D terminal with a

digital RGB video level (data range) of 0 (black) to

246 (white).

✽ When the DVI-D terminal is connected, the black may

seem to stand out, depending on the TV or Monitor

you are using. In this case, set this to “ENHANCED”.

Select the item that you wish to set and press the

select knob to define it.

(Exit the setting mode automatically.)

NORM

ENHA

NCED

B When “FILTER” is selected:

Turning the select knob will display the following

setting modes on the display.

50 kHz: (Factory default)

When playing Super Audio CDs, high

frequencies of 50 kHz and higher are cut.

100 kHz: When playing Super Audio CDs, high

frequencies of 100 kHz and higher are cut.

✽ Set to 100 kHz when a high frequency compatible AV

amplifier is connected.

Select the item that you wish to set and press the

select knob to define it.

(Exit the setting mode automatically.)

0kH

SELECT

PUSH ENTER

Main unit

ADJUSTING THE PICTURE QUALITY

ENTER

456

TOP MENU DISPLAY

MARKERRANDOM

PAGE

A-B

ZOOM

DIMMER PIC.ADJ

REPEAT

SETUP

CALL RETURN

SKIP SLOW / SEARCH

ANGLE SUBTITLE AUDIO

SEARCH MODE

PLAY

STILL /

PAUSE

STOP

PROG / DIR

CLEAR

SRS.TS

RC-962

ON OFF

T. MENU

DISP.

2, 3, 4, 5, 6, 7

Press the PIC.ADJ button during playback or

during pause.

• The image quality adjustment screen will

appear.

STD

Returns the settings to the factory default

settings.

M1 TO M5

Image quality settings that have been adjusted

to your preference can be stored to 5

memories, M1 to M5.

SET

SET permits set to setup level and setting of

the screen display position (horizontal and

vertical).

P I CTURE MODE

STD M1 M2 M3 M4 M5 SET

PIC.ADJ

Remote control unit

Select the memory using the 2 cursor buttons

(

0, 1) and press the ENTER button.

IMAGE QUALITY ADJUSTMENT 1

This permits adjustment of the contrast,

brightness, sharpness, tint, and enhancer. /

Advance to Operation 3.

IMAGE QUALITY ADJUSTMENT 2

This permits adjustment of the setup level,

black level, white level, color density, chroma

delay, and fresh color. / Advance to

Operation 4.

NOISE REDUCTION (ADJUSTMENT 3)

The following types of noise reduction can be

adjusted: 3D NR (3D noise reduction), BLNR

(block noise reduction), MQNR (mosquito

noise reduction), and CCS (cross color

suppression). / Advance to Operation 5.

GAMMA CORRECTION

This is selected when dark portions of the

image are obscure, or bright portions are much

brighter than necessary. / Advance to

Operation 6.

MEMORY 1

123

000

Remote control unit

ENTER

Remote control unit

SELECT

PUSH ENTER

Main unit

SELECT

PUSH ENTER

Main unit

SELECT

PUSH ENTER

Main unit

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon dvd a11 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon dvd a11

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info