Bedienungsanleitung Denon DVD-A1UDCI (Seite 58 von 71) (Englisch)

584585

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

InformationHDMI Control FunctionPlaybackSetupConnectionsGetting Started Specications

ENGLISH



If a problem should arise, rst check the following:

1. Are the connections correct?

2. Is the set being operated as described in the owner’s manual?

3. Are the other components operating properly?

If this unit does not operate properly, check the items listed in the table below. Should the problem

persist, there may be a malfunction.

In this case, disconnect the power immediately and contact your store of purchase.

Troubleshooting

Symptom Cause / Countermeasure Page

Power does not turn

on.

Check if the power cord is properly connected.

Plug the power supply cord into the power outlet.

The safety protection device may be activated. Unplug the power

cord once, and wait for 5-10 seconds and then plug it in again.

DVD-A1UDCI enters the standby status by safety function when

the fan stops. Check the back of the set if something is disturbing

the fan rotation.

•

–

3, 9

Unable to play back

bonus view.

Does the SD Memory Card has more than 1GB of available space?

Has the SD Memory Card been initialized by the DVD-A1UDCI?

Was the SD Memory Card inserted while the power of the unit is

on. (Insert the SD Memory Card while the DVD-A1UDCI is in the

standby status.)

•

4, 38

Picture does not

appear.

Switch the TV's input setting to the external input connected to

the player.

Is the Pure Direct function set to “On”? Set to “Off”.

Also, is “Pure Direct Setup” – “Video Out” on the GUI menu set

to “Off” at the “User Preset 1” or “User Preset 2” setting? Set it

to “On”.

Check the connection of the video/S-Video/component video cable.

Does the “Video Setup” – “Component Resolution” setting on the

GUI menu match the connected device's resolution? Set it so that

it matches.

•

–

30, 40

Video and audio are

not output with HDMI

connection.

Check the connection of the HDMI cable.

Is the “HDMI” indicator of the display of the DVD-A1UDCI

lighting?

Is the Pure Direct function set to “On”? Set to “Off”.

Also, is “Pure Direct Setup” – “Video Out” on the GUI menu set

to “Off” at the “User Preset 1” or “User Preset 2” setting? Set it

to “On”.

Check whether the connected display device or other device

supports HDCP. This unit will not output a video signal unless the

other device supports HDCP. See the owner’s manual of your TV,

AV Amp, etc.

Check that the setting of the HDMI video resolution supports the

resolution of the connected device. When set to “Auto”, DVD-

A1UDCI makes the setting automatically.

Check that the HDMI mode setting matches the connected

content. The connection method of each HDMI mode is different.

•

13, 14

30, 40

13, 14

Symptom Cause / Countermeasure Page

HD audio is not

output.

Set “BD Audio Mode” to “HD Audio Output”.• 33

Picture is not

displayed or is

disturbed.

Picture of a BD-Video

or DVD-Video disc is

in black and white.

The picture may be slightly disturbed directly after fast-forwarding

or reversing. This is not a malfunction.

Connect the DVD-A1UDCI’s video/S-Video/component video

output either directly to the TV or to the TV via the AV Amp. Do

not connect via a VCR (video cassette recorder). Some discs

include copy prohibit signals, and when such discs are played

via a VCR, the copy guard system may cause the picture to be

disturbed.

Is a disc that is not compatible with the player or a disc with

a different region number loaded? (This player supports region

code “A” for BD-Video discs, “1” or “ALL” for DVD-Video discs.)

•

–

No sound is heard or

the sound is hard to

hear.

Check the devices whose audio is connected and the speaker

connections.

Is the power of devices whose audio is connected turned on?

Is the input selection set to the input to which the DVD-A1UDCI

is connected?

Is the audio output properly selected?

•

11 ~ 22

–

13 ~ 21

Picture freezes

momentarily during

playback.

When the disc is scratched or contaminated with ngerprints, the

disc may not be played back correctly. Clean the disc or replace

with a non-scratched disc.

There may be a problem with the data recorded on the disc.

•

–

Playback does not

start even when 1 is

pressed, or starts but

stops immediately.

Is there condensation inside the player or on the disc? (Let set for

1 to 2 hours with the power off.)

When the disc is scratched or contaminated with ngerprints, the

disc may not be played back correctly. Clean the disc or replace

with a non-scratched disc.

Is the disc loaded upside-down? Load the disc properly, with the

side containing the signals to be played facing down.

Is an unplayable disc loaded?

•

3, 4

Subtitles are not

displayed.

Subtitles cannot be displayed for BD-Video, DVD-Video or DivX®

les that do not contain subtitles.

Is the subtitle setting “Off”? Use a disc menu or to set the

displayed subtitle.

•

SD Memory Card

cannot be read.

The format of the card does not match to this unit or the card is

not compatible.

Is the playback media mode set to “SD CARD MODE”?

Select “SD CARD MODE” at .

•

Troubleshooting

Denon DVD-A1UDCI Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info