Bedienungsanleitung Denon DVD1720 (Seite 13 von 200) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

30404

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

–

English

Connection to an Audio System

Stereo system

NOTES (for Method 2 only):

• When using an AV amplifier with a built-in decoder (AV control center), Dolby Digital, DTS, or MPEG decoder as shown in

the Method 2, set DOLBY DIGITAL, DTS or MPEG to BITSTREAM accordingly for audio output in the setup menu (refer to

pages 24 and 25). Set it to PCM or OFF for the decoder that is not used currently. Playing back a DVD using incorrect set-

tings may generate noise distortion, and may also damage the speakers.

• The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD

deck or DAT deck.

• Set DOLBY DIGITAL and MPEG to PCM, and DTS to OFF for audio output in the setup menu for connecting to an MD deck

or DAT deck (refer to pages 24 and 25).

• Harsh noise that could harm your ears or the speakers is generated when a DVD recorded in DTS is played back while

using a decoder, etc., that is not DTS-compatible.

• When playing back a copyright-protected 96kHz (88.2kHz) linear PCM DVD, the digital sound will be down sampled at

48kHz (44.1kHz), even if you set LPCM SELECT to OFF (refer to pages 24 and 25).

AUDIO

DVD

Audio Input

Jacks

Digital Audio

Input Jacks

ANALOG

AUDIO OUT

DIGITAL OUT

• Method 1 DVD Player + Stereo system

• Method 2 DVD Player + AV amplifier with a built in decoder (AV control center), Dolby Digital decoder, DTS decoder,

MPEG decoder, MD deck or DAT deck

Method 1 Method 2

CONNECTIONS

The following shows examples of connections commonly used to connect the DVD player to TV and other com-

ponents. If using this DVD player to play back a DVD in a Dolby Digital 5.1 channel surround or DTS surround

format, the DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL

OUT jacks. By connecting the player to a Dolby Digital, DTS or MPEG decoder, you can enjoy more convinc-

ing, realistic ambience with powerful and high-quality surrounding sound of a professional standard which can

be heard in movie theaters. Use an audio optical (not included) or coaxial digital cable (not included) for the

audio connections.

NOTES:

•

Be sure to turn off the power to all components in the system before connecting another component.

• Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the

DVD player.

Optical cable (commercially available)

• Optical cable (commercially available) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a

diameter of 15 cm or more when storing them.

• Use a cable which is 3m or shorter.

• Insert cable plugs firmly into the connectors when making connections.

• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.

AV amplifier with a built in decoder

(AV control centre),

Dolby Digital decoder,

DTS decoder, MPEG decoder,

MD deck or DAT deck

Audio cable

(Supplied)

Optical cable

(Commercially

available)

Audio Coaxial

Digital cable

(Commercially

available)

E6182ED_EN.qx3 05.4.27 6:08 PM Page 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DVD1720 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon DVD1720

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info