Bedienungsanleitung Denon MC2000 (Seite 23 von 31) (Englisch)

614622

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

Before use Connections

Basic

operations

Installing and setting up

supplied software

USB settings

Troubleshooting Index

Speciﬁcations

Signal system chart

Part names and

functions

ThetoppanelisexplainedforSERATODJINTRO.OperationsofthetoppanelonlyoperatetheDJsoftwareanddonotcontrolaudioinput/output.

For buttons not explained here, see the page indicated in parentheses ( ).

Part names and functions

Top panel

q Effects adjustment knob (1/2/3)

Adjusts the effect balance.

Beats select/Sample volume knob

Turn the knob to select the effect beats, and

press the knob to set beats manually.

Turn the beats select knob:

Selects the effect beats.

Press the beats select knob:

Press the knob repeatedly, and the BPM value is

measured as the interval between presses.

•Hold down W7 SHIFT and turn this knob to

control sample volume.

•Hold down this knob more than 1 second to

restore the beat.

e Effects ON/OFF switch button (1/2/3)

SwitchestheeffectsON/OFF.

r Auto loop/exit and loop size adjustment

buttons

(AUTO LOOP/EXIT –/+)

•AUTO LOOP/EXITswitchesautoloopON/OFF.

•Use –/+toadjusttheloopsize.

t Loop point setting button (IN/OUT)

Sets the loop in point and loop out point.

•Press this button during loop playback to ﬁne

adjust the loop point.

y PAN adjustment knob (MONITOR PAN)

Adjusts the balance between the cue output

from the headphones and master volume.

u Hot cue button (1/2/3/4)

The following operations differ depending on

whether o SAMPLE MODE are ON or OFF.

•OFF: Sets CUE 1 – 4 points or cue playback.

•Hold down W7 SHIFT and press this button to

delete each of the cue point settings.

•ON：Plays back the sample slot. If the sample

is currently being played, playback is started

again from the start of the sample.

•Hold down W7 SHIFT and press this button to

stop playing the sample slot.

Q3 Q4 Q6 Q9Q8Q5

i Headphone output volume adjustment knob

(MONITOR PHONES)

Adjusts the volume output to the headphones.

o Sample mode switching button

(SAMPLE MODE)

OFF: Switches to the hot cue mode.

HOT CUE 1 – 4 are used to operate the hot cues.

ON: Switches to the sample mode.

HOT CUE 1 – 4 are used to operate the sample

player.

Q0 Key lock button (KEY LOCK)

With this ON, the key does not change even if

you adjust the tempo during playback.

•Hold down W7 SHIFT and press this button to

change the key adjustment range.

Q1 Jog wheel ···················································· (11)

Performs the search operation or bend operation.

•Hold down W7 SHIFT and press this button to

fast search.

Q2 Pitch fader slider

Adjusts the playback pitch.

•Move the knob toward the “–” direction to

slow down the pitch and the “+” direction to

speed up the pitch.

Q3 Beat sync button (SYNC)

Performs auto beat matching.

•Hold W7 SHIFT and press this button to exit the

beat matching.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon MC2000 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon MC2000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info