Bedienungsanleitung Denon MC6000MK2 (Seite 15 von 37) (Englisch)

614621

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

Installing the ASIO driver (Windows only)

Starting up

When the DENON DJ ASIO driver “ASIO Control Panel” is opened from the DJ software or desktop icon,

the MC6000MK2 appears in the ASIO Control Panel.

About the control panel screen



Disable

Cancel

Device Description

Device Name:

Unit Number.

Software Version:

Audio input channels:

Audio output channels:

Sampling frequency:

Bit resolution:

Audio buffer size:

Audio Buffer Size

512sample(10ms)

MC6000MK2

44.1 kHz

16 bit

512

Devices

48.0kHz

16 bit

24 bit

44.1kHz

88.2kHz

96.0kHz

Sampling Rate

Bit Resolution



DENON DJ ASIO for DJ Controller Ver.1.0.1

MC6000MK2

u y

rew tq

When using the DJ software, close this control panel screen.

q Devices (Device list)

This window is used for automatically displaying all connected DENON DJ devices in a list.

(Example: MC6000MK2)

•When you select a device you want to set from this list, the current settings of the selected device

appear in a window u (“Device Description”).

•If you double-click a device, the ASIO device status is switched from “Enable” to “Disable” or vice

versa.

•ASIO device status

Enable : A check mark appears on the left side of a device name and the name is highlighted

(bold).

Disable : The check mark on the left side of a device name is removed and the device name is

displayed in lightface.

•You can select one device at a time.

•You can set multiple devices to enable at the same time.

w Enable/Disable

This button is used for switching a device selected in q (Devices) to enable or disable as an ASIO

device.

•When only one device is connected to the computer, “Enable” is always selected.

The ASIO device status can also be switched by double-clicking the device name displayed in q

(Devices).

e Audio Buffer Size

Usethisslidertoadjustthebuffersize.

NOTE

•The range of values is 88 to 2048 (sample units), in steps of 1 sample.

•When you set multiple devices to enable as ASIO devices, the same setting values apply to all ASIO

devices.

•Lowering the latency will result in tighter hardware-software response, but will increase computer

load and may result in low audio quality or dropouts on lower spec computers. Adjust until a good

balance is found.

•The Sampling Rate and the Bit Resolution cannot be changed.

Before use

Connections

Installing and setting up

supplied software

Basic

operations

USB settings

Other

functions

Part names and

functions

Troubleshooting

Speciﬁcations

Index

System

diagram

Installing and setting up

supplied software

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon MC6000MK2 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon MC6000MK2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info