Bedienungsanleitung Denon PMA-1510AE (Seite 9 von 17) (Englisch)

498788

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

ENGLISH

Getting started

Basic connections Basic operation Troubleshooting Speciﬁcations IndexAdvanced connections Advanced operation Explanation terms

Connections for all compatible audio signal format is

described in this operating instructions. Please select the

types of connections corresponding to the equipment you are

connecting.

NOTE

• Do not plug in the power cord until all connections have been

completed.

• When making connections, also refer to the operating instructions

of the other components.

• Be sure to connect the left and right channels properly (left with

left, right with right).

• Do not bundle power cords with connection cables. Doing so can

result in humming or noise.

• Do not turn up the volume without a turntable connected to the

PHONO input terminals. Doing so will cause humming or noise.

Preparations

Connecting cables

Select the cables according to the equipment being connected.

Audio cables

Analog connections (stereo)

(White)

(Red)

Stereo pin-plug cable

Speaker connections

Speaker cables

NOTE

• Connect the speaker cables so they do not stick out of the speaker

terminals. The protection circuit may be activated if the wires touch

the rear panel or if the + and – sides touch each other (v “Protection

circuit”).

• Never touch the speaker terminals while the power supply is

connected. Doing so could result in electric shock.

Speaker impedance

Use speakers with impedances within the ranges shown below to

suit how they are used.

Speakers used Impedance

A 4 - 16 Ω

B 4 - 16 Ω

A and B 8 - 16 Ω

Bi-wiring Connection 4 - 16 Ω

Protection circuit

The protection circuit is be activated in the following situations:

• If the speaker cable wire touches the rear panel or screws or if the

speaker cable wire touches the speaker cable’s + and – sides are

touching

• If the surrounding temperature is extremely high

• If the inside of the ampliﬁer gets hot to extended use at a high

output

If this happens, unplug the power cord, then check the connections

of the speaker cables and input cables. If the unit becomes very

hot, wait for it to cool off and improve the ventilation around it. After

doing this, plug the power cord back in.

If the protection circuit is activated even though there are no

problems with the ventilation around the unit or in connections, the

unit may be damaged. Turn off the power and then contact a DENON

service center.

Basic connections

Connecting the speakers

Connecting the speakers cables

Carefully check the left (L) and right (R) channels and + (red) and –

(black) polarities on the speakers being connected to the unit, and be

sure to connect the channels and polarities correctly.

Peel off about 10 mm of sheathing

from the tip of the speaker cable,

then either twist the core wire tightly

or apply solder to it.

Turn the speaker terminal

counterclockwise to loosen it.

Insert the speaker cable’s core

wire to all the way into the speaker

terminal.

Turn the speaker terminal clockwise

to tighten it.

Speaker terminal dimensions

8mm

5mm

Connecting the audio equipment

Cautions on playing SA sources:

When regular speakers not compatible with SA sources (DVD Audio discs, Super Audio CDs and other sources, including treble components

above the audible range), set the properties of the player (DVD Audio player, Super Audio CD player, etc.) for use with regular speakers (or

ampliﬁers).

The speakers may be damaged if the volume is set too high when playing SA sources. For instructions on player settings, refer to the

operating instructions included with the player.

Basic connections

1.PMA1510AEE2_ENG_002_5th_0222.indd 5 2010/02/23 15:55:15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon PMA-1510AE Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info