Bedienungsanleitung Denon PMA-1510AE (Seite 12 von 17) (Englisch)

498788

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

ENGLISH

Getting started

Basic connections Basic operation Troubleshooting Speciﬁ cations IndexAdvanced connections Advanced operation Explanation terms

INPUT SELECTOR

VOLUME

[MUTE]

[AMPLIFIER POWER]

VOLUME

<BASS>

<BALANCE> INPUT SELECTOR

Starting recording

Set <REC OUT SELECTOR> to the program source

you wish to record.

Set the recorder to the record mode.

Start playing the source to be recorded.

NOTE

The recording source switches INPUT SELECTOR is operated during

recording.

Copying recorders

Turn the <REC OUT SELECTOR> and select

“RECORDER-1 1 2” (or “RECORDER-2 1 1”).

[Selectable sources]

RECORDER-1 1 2

RECORDER-2 1 1

b When copying from a device connected to the

“RECORDER-1” terminal to a device connected to the

“RECORDER-2” terminal, select “RECORDER-1 1 2”.

b When copying from a device connected to the

“RECORDER-2” terminal to a device connected to the

“RECORDER-1” terminal, select “RECORDER-2 1 1”.

Set the device connected to the RECORDER-1 (or

RECORDER-2) terminal to the record mode.

Start playback on the device connected to the

RECORDER-2 (or RECORDER-1) terminal.

• The sound to be recorded can be heard by selecting the playback

source with the INPUT SELECTOR, while the recorded sound can

be heard by selecting the recorder.

• When performing these operations, also refer to the operating

instructions of the other devices.

NOTE

The sound may be interrupted or noise may be recorded if INPUT

SELECTOR

is operated during recording.

Starting playback

Use INPUT SELECTOR to select the source.

The input indicator for the selected source lights.

[Selectable sources]

RECORDER-2

RECORDER-1

PHONO

TUNER

LINE

Play the selected source.

Adjust the VOLUME to the desired level.

Adjust the tone with <BASS>, <TREBLE> and

<BALANCE>.

• When the VOLUME control knob is turned just past the “12

o’clock” position (over halfway), the effect of BASS and

TREBLE adjustments decreases.

• When the VOLUME control knob is turned to maximum or

all the way clockwise, the bases and treble can no longer be

adjusted.

If there is no need to adjust the tone, press <SOURCE

DIRECT>

• When switched “hON”, the signal does not pass through

the tone adjustment circuitry (bass, treble and balance),

resulting in playback of a higher sound quality.

• When set to “jOFF”, the sound can be adjusted to suit

your taste.

Press [MUTE] to mute the sound.

• The power indicator on the main unit blinks red.

• Press again for sound.

Using headphone set

Plug headphones into PHONES jack.

• The speaker output turns off when the headphones are plugged in.

• To prevent hearing loss, do not raise the volume level excessively

when using headphones.

PHONES jack

Basic operation

Button located on both the main unit and

the remote control

BUTTON

Button only on the main unit

Button only on the remote control

[BUTTON]

Symbols used to indicate buttons in this manual

1.PMA1510AEE2_ENG_002_5th_0222.indd 8 2010/02/23 15:55:17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon PMA-1510AE Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info