Bedienungsanleitung Denon RBD-X1000 (Seite 6 von 60) (Englisch)

578715

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

ENGLISHENGLISH

Main features

High quality ampliﬁer stressing sound quality

Equipped with a 70 W + 70 W (6 Ω) high-quality ampliﬁer circuits.

Direct Play for iPod

and iPhone

via USB

Music data from an iPod can be played back if you connect the

USB cable supplied with the iPod via the USB port of this unit, and

also an iPod can be controlled with the remote control for this unit.

Weight and Dramatic sound

The board and circuit conﬁguration has been redesigned to achieve

lower impedance. Since stable current is supplied to the power

amp and other sections, it is possible to realize as much as 70

watts of power.

“Simple & Straight” circuit design for sound

purity and free of coloration

This unit gives you high sound quality based on the “simple &

straight” concept. Circuitry is uncomplicated, signal paths are short,

and all adverse inﬂuences on sound quality have been minimized.

Playback of MP3 and WMA ﬁles

Supports playback of discs and USB memory devices on which

MP3 or WMA ﬁles are recorded. The unit’s display can display the

title of the track and the name of the artist of the current track.

Low standby power consumption

Designed with the environment in mind, the unit consumes just

0.5 W while in standby mode.

Cautions on handling

• Before turning the power switch on

Check once again that all connections are correct and that there are

no problems with the connection cables.

• Power is supplied to some of the circuitry even when the unit is

set to the standby mode. When going on vacation or leaving home

for long periods of time, be sure to unplug the power cord from the

power outlet.

• Image persistence (image burn-in)

Do not leave the still images of the disc menu, the unit menu, etc.,

displayed on the TV screen for long periods. This can result in image

persistence (image burn-in) on the screen.

• About Condensation

If this unit is moved from a cold place to a warm place, or installed

in a room subject to rapid temperature rise from a heater, etc.,

condensation (dew) may form on the internal parts of the unit

(operating parts and lenses).

If used in this condition, this unit will not operate correctly and

damage may result. If condensation is formed on the unit, leave this

unit for 1 to 2 hours with the power off before use.

• Cautions on using mobile phones

Using a mobile phone near this unit may result in noise. If that

occurs, move the mobile phone away from this unit when it is in use.

• Moving the unit

Be sure to remove a disc, turn off the power and unplug the power

cord from the power outlet. Next, disconnect the connection cables

to other system equipment before moving the unit.

• About Care

• Wipe the cabinet and control panel clean with a soft cloth.

• Follow the instructions when using a chemical cleaner.

• Benzene, paint thinner or other organic solvents as well as

insecticide may cause material changes and discoloration if brought

into contact with the unit, and should therefore not be used.

• Sufﬁciently ventilate the place of installation

If the unit is left in a room full of the smoke from cigarettes, etc., for

long periods of time, the surface of the optical pickup could get dirty,

in which case it will not be able to read the signals properly.

Accessories

Check that the following parts are supplied with the product.

e r uy

q Owner’s manual ......................................................................1

w Service network list .................................................................1

e Power cord (Cord length: Approx. 2 m) ...................................1

r Remote control unit (RC-1153) ................................................1

t R6/AA batteries .......................................................................2

y AM loop antenna .....................................................................1

u FM indoor antenna ..................................................................1

About this manual

n Operation buttons

The operations described in this manual are based mainly on

remote control operation.

n Symbols

This symbol indicates a reference page on which

related information is described.

This symbol indicates a supplementary information

and tips for operations.

NOTE

This symbol indicates points to remember operations

or function limitations.

n Illustrations

Note that the illustrations in these instructions are for explanation

purposes and may differ from the actual unit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon RBD-X1000 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon RBD-X1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info