Bedienungsanleitung Denon RBD-X1000 (Seite 49 von 60) (Englisch)

578715

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Getting

Started

Basic

Connections

Advanced

Connections

Basic

Operations

Advanced

Operations

Other

setting

Settings

Other

information

Explanation

terms

Troubleshooting Speciﬁcations Index

ENGLISHENGLISH

Troubleshooting

GBlu-ray DiscH

Symptom Cause/Solution Page

Picture freezes

momentarily during

playback.

• The disc may not play back correctly if it is scratched or dirty.

Either clean the disc or replace it.

• There may be a problem with the recorded disc.

–

Playback does not

start even when 1 is

pressed, or starts but

stops immediately.

• Check whether there is condensation on the inside of the unit or

disc. If there is condensation, turn off the power and let the unit

stand for 1 to 2 hours.

• The disc may not play back correctly if it is scratched or dirty.

Either clean the disc or replace it.

• Check whether the disc has been inserted upside down. Insert

the disc so that the recording surface to be played back faces

downward.

• Check whether a disc that cannot be played back on this unit has

been inserted.

Subtitles are not

displayed.

• Subtitles cannot be displayed for BD-Video or DVD-Video ﬁles that

do not contain subtitles.

• Check whether the subtitles setting is set to “Off”.

Wallpaper is not

displayed even after

the disc has been

removed.

• An internal error may have occurred in the unit. Set the power to

standby, wait awhile, then turn the power back on.

–

Button operation

does not work. The

unit fails to operate.

• Operations may not be permitted by the disc. Refer to the

instructions of the disc.

• The protection circuit is active. In this case, disconnect the power

plug from the electric outlet, wait 5 to 10 seconds and then insert

it back into the outlet.

The unit fails to read

the disc.

• The pickup lens may be dirty. Use a commercially available lens

cleaner to clean the laser pickup. Avoid use of cleaners equipped

with brushes, since they may scratch the lens.

–

Angle does not

switch.

• If a BD-Video or DVD-Video does not record multiple angles, angle

cannot be switched. Also, multiple angles may be recorded for

speciﬁc scenes.

Playback does not

start when the title is

selected.

• Playback may be prohibited by the viewing restriction setting.

Check “Parental” on the OSD menu.

The password for

rating level has been

forgotten.

• The default setting is “3308”. –

GRadioH

Symptom Cause/Solution Page

Reception fails, or

there is a lot of noise

or distortion.

• Change the antenna orientation or position.

• Separate the AM loop antenna from the unit.

• Use an FM outdoor antenna.

• Separate the antenna from other connection cables.

GUSB memory deviceH

Symptom Cause/Solution Page

When a USB

memory device is

connected, “USB” is

not displayed on the

OSD menu.

• The OSD screen is only displayed when a USB memory device

is connected to the USB2 port on the rear panel. Set the input

source to “DISC/USB2”.

• The set cannot recognize a USB memory device. Check the

connection.

• A USB memory device not conforming to mass storage class is

connected. Connect a USB memory device conforming to mass

storage class.

• A USB memory device cannot be connected via a USB hub.

Files on a USB

memory device

cannot be played.

• Set the USB memory device format to “FAT16” or “FAT32” for

USB1 port and “FAT32” for USB2 port. For details, refer to the

USB memory device’s operating instructions.

• If the USB memory device is divided into multiple partitions, only

ﬁles stored in the top partition can be played.

• The ﬁle is recorded in an incompatible format. Please record it in

a compatible format.

• This unit cannot play back ﬁles covered by copyright protection.

29, 30

–

29, 30

–

The sound quality is

poor or there is noise

during playback.

• The ﬁle being played back has a low bit rate. –

“Connection Error”

is displayed.

• Unable to communicate properly. Turn off the power to this unit,

unplug the USB memory device and then plug it back in.

–

“Communication

Error” is displayed.

• The USB memory device is not responding. Turn off the power to

this unit, unplug the USB memory device and then plug it back in.

–

“Overcurrent” is

displayed.

• The USB memory device is consuming too much power. When

using a USB portable hard disk that can be powered by an AC

adapter, connect its AC adapter.

–

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon RBD-X1000 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon RBD-X1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info