Bedienungsanleitung Denon S-302 (Seite 16 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

67709

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite



Setup Playback Remote Control Information Troubleshooting

ENGLISH

When connecting with an HDMI/DVI converter cable (adapter)

• HDMI video signals are theoretically compatible with the DVI format.

When connecting to a TV, etc., equipped with a DVI-D terminal, connection is possible using an HDMI/

DVI converter cable, but depending on the combination of components in some cases the video signals

will not be output.

• When connecting using an HDMI/DVI converter adapter, the video signals may not be output properly

due to poor connections with the connected cable, etc.

Connecting Equipment with HDMI Connectors

In order to play the digital video and audio signals of a DVD Video disc using HDMI connections, both the

connected DVD player and TV must be equipped for a copyright protection system called "HDCP" (High-

bandwidth Digital Content Protection).

HDCP is a copy protection technology consisting of data encoding and mutual identiﬁcation of the

devices. The S-302 is HDCP-compatible. Check the operating instructions of your TV to see if they are

compatible.

Digital video and digital audio can both be connected using a single HDMI cable.

NOTE

• When playing multichannel sources, the audio output is downmixed to two channels for output. In

addition, the sampling frequency is lowered to 48 kHz.

• Video signals are not output properly when using devices that are not HDCP-compatible.

•Use a cable on which the HDMI logo is indicated (a certiﬁed HDMI product) for connection to the HDMI

connector. Normal playback may not be possible when using a cable other than one on which the HDMI

logo is indicated (a non-HDMI-certiﬁed product).

• The audio signals output from the HDMI connector (sampling frequency, bit rate, etc.) may be restricted

by the connected device.

If the connected TV is only compatible with DVI-D terminals, use an HDMI/DVI conversion cable.

Setting the HDMI output resolution

Set the resolution of the video signals output from the HDMI output terminal to a resolution with which the

connected devices are compatible. Press HDMI on the remote control unit to select.

1080i720p480p/576p AUTO1080p

Condition of signals

from the S-302's HDMI

output terminal

HDMI-compatible

monitor

DVI-D-compatible

monitor

(HDCP compatible)

DVI-D-compatible

monitor

(HDCP non

compatible)

Both video and audio

output

Only video outputz

Neither video nor audio

output

z: Only output when video signals are of RGB format.

Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect

correctly.

iPod

Connecting the Playback Components

Control Dock for iPod

Use either a DENON Control Dock for iPod

(ASD-1R, sold separately) or an iPod cable

(AK-P100, sold separately) to connect the S-

302 and an iPod.

• When using the Control Dock for iPod,

certain settings must be made on the

Control Dock for iPod. For details, refer

to the Control Dock for iPod’s operating

instructions.

• When using an iPod, refer to “iPod

Playback” (vpage 35).

Getting Started Connections

1.S-302E2_1st.indd 16 2007/07/30 20:00:49

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon S-302 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon S-302

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info