13
ENGLISH
Easy Setup and Operation Easy Setup and Operation
ENGLISH
Playing a DVD disc
1
Check that all connections are correct.
• If appears on the TV screen while buttons are being
operated, that operation is not possible on the S-101 or with
that disc.
• The disc keeps turning while the menu screen is displayed on
the TV screen.
Disc tray
• Pick up the disc carefully so as not to touch the signal surface and hold it with the labeled side facing up.
•With the disc tray fully open, set the disc in the disc tray.
NOTE:
• Do not press the disc tray in by hand when the power is off.
Doing so will damage it.
• Do not place foreign objects in the disc tray. Doing so will
damage it.
• If a foreign object is caught in the disc tray during closing,
simply press the
55
button again and the tray will open.
Press the
55
button to set the DVD disc in the
disc tray.
4
2
Turn on your monitor (TV).
Switch the input selector on the TV to this unit.
The disc tray can also be closed automatically to load the
disc by pressing the
11
button. After this, playback starts
automatically.
7
Adjust the volume.
The volume is shown on
the display.
(Main unit) (Remote control unit)
Press the
55
button.
5
Press the
11
button.
6
3
Press the ON/STANDBY switch.
• The power indicator lights orange, the power turns on
and the display lights.
Several seconds are required from the time the ON/STANDBY
switch is pressed until the power turns on. This is due to the
built-in muting circuit that turns off (mutes) the sound when
the power is turned on and off. The power indicator flashes
orange while the muting circuit is activated.
Even when the ON/STANDBY switch has been pressed again
and the power has been set to the standby mode, power is
still supplied to some circuits. When leaving home or
traveling, be sure to unplug the power supply cord from the
power outlet. In the standby mode, the power indicator is
lights red. The indicator is yellow when the timer is set.
