Remote control unit
q POWER OFF button
Press this button to switch from the operating mode to the
standby mode.
w Preset channel buttons (1 ~ 10)
Use these when presenting and recalling stations. Also
use these with the SHIFT ,MEMORY BLOCK button to
use a total of 200 preset channels (FM/AM 100 , DAB 100),
A (1 ~ 10), B (1 ~ 10), ... J (1 ~ 10).
e MENU button
This button to enter/exit menu mode.
r BAND button
Selects DAB, FM or MW (AM).
t CHANNEL/CONTROL button
This button is used to select radio presets or select
stations and menu options.
y DIMMER button
The display’s brightness switches (in three levels) each
time this button is pressed.
u Preset channel range buttons (CH A/B, C/D, E/F,
G/H, I/J)
Use these buttons to switch the preset channel’s shift
mode directly.
i ENTER button
This button is used to set the menu.
o DISPLAY button
This button is used to select the display mode ( page
13, 16, 23).
!0 AUTO PRESET/AUTO TUNE button
Press this button in the DAB mode to perform a local scan
(UK band
III). (UK stations are in the range 11B ~ 12D.)
When the button is held in, the full scan operation (Full
band and L-band) is conducted.
When pressed in the FM mode, receivable FM stations are
automatically stored in the preset memory in order starting
from preset channel A1.
!1 TUNING buttons
Use these to change the received frequency to a higher
frequency (+) or a lower frequency (–).
!2 SHIFT button
Use this button to select the memory blocks, A (1 ~ 10), B
(1 ~ 10), ... J (1 ~ 10).
!3 MEMORY button
Frequencies and station names can be stored in the
memory. When this button is pressed, the “MEMO” and
“CH” indicator on the display flashes for 10 seconds. Use
the SHIFT button and the Preset channel buttons during
this time to designate the desired preset channel.
!4 POWER ON button
Press this button to switch from the standby mode to the
operating mode.
