167190
5
Zoom out
Zoom in
Vorherige Seite
1/10
Nächste Seite
E5
SEEK MODE
When press the SEL button for more than 2 seconds, it is activated as selecting mode of
these function.
SEEK 1: When SEEK 1 mode is activated, AUTO SEEK SCAN is stopped when station is
detected even user still push SEEK button.
SEEK 2: Auto SEEK SCAN is not stopped even station is detected if user push SEEK button.
When release this SEEK button, then stop when station is defected.
STEREO/MONO
When press the SEL button for more than 2 seconds, it is activated as selecting mode of
these function.
When FM stations are weak and are disturbed, listening can be improved by selecting MONO.
LOCAL/DX
When press the SEL button for more than 2 seconds, it is activated as selecting mode of
these function.
“Local” position in areas with strong signals to let radio stop at only strong stations during
manual tuning (LOC appears). Press to Distant position in areas with weak signals to listen to
all stations.
VOL LAST/ADJUST
When press the SEL button for more than 2 seconds, it is activated as selecting mode of
these function.
VOL LAST: The volume level which user adjust lately is selected whenever power is ON and
OFF.
VOL ADJ: The initial volume level (user can adjust) is selected whenever power is ON and
OFF
3. VOL UP/VOL DOWN FOR BASS/TREBLE/BALANCE/FADER (+/–)
By pressing these key, you can adjust VOL/BASS/TREB/BAL/FAD and select the mode of TA
SEEK/MASK DPI/AUDIO DSP/LOUDNESS/BEEP/SEEK/STEREO/LOCAL/VOL LAST.
4. PRESET STATIONS (1,2,3,4,5,6)
(A) RADIO MODE:
When pressed short, these keys select a preset station directly. When pressed longer than 1
sec., current station is stored in preset memory bank. When PTY mode is selected, the PTY
switch is shared as follows:
TA SEEK DSP
SEL
SEEK
SEL
2 sec.
SEL
LOUD
SEL
BEEP
SEL
MASK DPI
SEL
SEEK1 / SEEK 2
STEREO/MONO
TA SEEK DSP
SEL
SEEK
SEL
STEREO
SEL
2 sec.
SEL
LOUD
SEL
BEEP
SEL
2
MASK DPI
SEL
LOCAL/DX
TA SEEK DSP
SEL
SEEK
SEL
STEREO
SEL
LOCAL
SEL
2 sec.
SEL
LOUD
SEL
BEEP
SEL
MASK DPI
SEL
VOL LAST / VOL ADJ
TA SEEK DSP
SEL
SEEK
SEL
STEREO
SEL
LOCAL
SEL
2 sec.
SEL
LOUD
SEL
BEEP
SEL
VOL LAST
SEL
MASK DPI
SEL
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denver cad 340 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Denver cad 340

Denver cad 340 Bedienungsanleitung - Deutsch - 10 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info