Bedienungsanleitung Denver CRD-505 (Seite 2 von 5) (Englisch)

740336

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

FULL SCAN: To perform a wide range search for DAB stations and store them automatically.

MANUAL TUNE: Press the < or > button to tune the frequency manually.

4. Press the SELECT button to confirm the selection.

Tuning to a DAB station

1. In DAB mode, press the < or > button to cycle through the DAB stations in the station list.

2. Press the SELECT button to tune to the selected DAB station.

Storing preset stations

You can store up to 20 DAB stations as preset stations.

1. Tune to a DAB station.

2. Press the PRESET button. “XX-(station name)” or “XX-EMPTY” shows on the display. “XX” is

the preset number (1-20).

3. Press the < or > button to select a preset number.

4. Press the SELECT button to confirm. The DAB station is stored with the selected preset

number. Repeat steps 1-4 to store more preset stations.

5. To tune to a preset station, press the PRESET button once, then press the < or > button to

cycle through the list of preset stations and then press the SELECT button to confirm the

selection.

To change the DAB station assigned to a preset number, repeat steps 1 to 4 above to overwrite the

existing DAB station.

Listening to FM broadcasts

1. Press the POWER button to turn the radio on.

2. Press the SOURCE button to select FM mode. The FM mode icon shows on the display.

Scanning for FM stations

In FM mode, press the SELECT button to activate the automatic search for the next available FM

station. After an FM radio station is detected, the search stops. The FM radio station is broadcast.

Tuning the FM frequency

● In FM mode, press the < or > button to tune down or up the frequency.

● Once you have tuned up or down the frequency, press the SELECT button to activate the

automatic search for the next available FM station in the selected tune up or down direction.

Setting alarms

The radio have 2 alarm settings.

To set the alarm:

1. Press the ALARM button to select between Alarm 1 and Alarm 2 and then press the SELECT

button to confirm the selection.

2. Press the < or > button to select alarm “ON” and then press the SELECT button to confirm the

selection.

3. Press the < or > button to set the hour time of the alarm and then press the SELECT button.

4. Press the < or > button to set the minute time of the alarm and then press the SELECT button.

5. Press the < or > button to cycle through the alarm frequency options and then press the

SELECT button to confirm the selection.

The alarm frequency defines how often the alarm rings.

Frequency options: Daily, Once, Weekends and Weekdays. If “Once” is selected, you will also

be prompted to set a specific date.

6. Press the < or > button to cycle through the source options and then press the SELECT button

to confirm the selection.

The source defines the sound source of the alarm.

Source options: DAB, FM and Buzzer. If DAB or FM is selected, the last played station will be

used as the alarm.

7. Press the < or > button to adjust the volume level and then press the SELECT button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denver CRD-505 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denver CRD-505

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info