The Sleep time will be displayed and music will continue to play for the time you selected, then the unit will set to
Standby.
After using your radio
•
Set the radio to Standby or switch it o.
Unplug the radio from the mains if you are leaving it unattended for a long period (holidays etc).
•
Care and cleaning
All care and cleaning operations should be carried out with the unit unplugged from the mains power.
Occasionally wipe the cabinet with a lint free duster. Never clean the unit with liquids or solvents.
CARE AND MAINTENANCE
TROUBLESHOOTING
Poor quality radio reception
The aerial signal may not be adequate. Try adjusting the aerial position while watching the signal strength on the
bargraph. Signal strength can be displayed by tuning to aDAB station and pressing the Info/Menu button until the
signal strength bargraph is displayed.
Few DAB stations are available after moving area
The radio should be reset to renew the station list. Refer to the ‘Factory Reset’ section on page 9.
Poor quality FM reception
If you are listening to a st
ation with a weak signal, try setting to mono reception.
FACTORY RESET
DAB is a terrestrial system and frequencies in dierent areas vary. If you move the radio to another part of the
country, performing a scan may not be enough to reprogram the radio you may need to reset the radio.
Factory reset is an option available from the Settings menu.
Factory reset is an option available from the Settings menu.
To restore the factory settings
Follow the instructions in the ‘DAB SETTINGS MENU section to select Factory Reset from the menu.•
The Radio will now re-start and scan the DAB broadcast stations in your area.
After reset all settings are returned to the factory defaults and any stored presets are erased.
There is a headphone output socket on the back panel of the radio. If headphones are connected to this socket for
private listening, the speakers will cut out automatically.
HEADPHONES
ENG-10
