Bedienungsanleitung Denver DRO-120 Drone (Seite 1 von 1) (Englisch)

674269

Zoom out

Zoom in

Vorherige Seite

1/1

Nächste Seite

Charging

Remove the battery from the drone, then connect one side of the USB cable with the

battery, and the other side into any a USB port of computer or a smart-phone charger

(not included).

-03-

-05- -06-

-04-

-01-

-02-

Notice:

1 Instructions

Please read the user handbook carefully and then keep it in a safe place for future

consultation and maintenance.

1.1 Important Notice

(1) This product is not a toy, it's a piece of complicated equipment which integrated with

professional knowledge by mechanic, electric, air mechanics, high-frequency transmitter

and so on, so it should be installed correctly and adjusted to avoid any accidents.

The owner must always operate in a safe manner, if improper operation that caused

human injured or property damage, then we DENVER ELECTRONICS A/S accept no

liability for any safety duties from operation. As we have no control over the way they

maintained, used and operated.

(2) This product is not suitable for users under 14 years of age.

(3) The use of the drone may be prohibited in some areas like train stations, airports,

aircrafts, inhabited areas etc. You should check with the authorities whether the use of

the drone is permitted in some public or private areas. Always use the drone bearing in

mind not to breach people's privacy. We exclude liability for any wrong use of the drone.

(4) We DENVER accept no liability for any safety duties or fines arising from operation,

usage or mis-control after the sale of products. Warranty does not cover if drone crashes

and get damaged.

1.2 Safety Precautions

Keep away from crowd when flying, since drone flight is a high-risk hobby. Misassembled

or broken main frame or defective electronic equipment or unskilled operation may cause

accidents of machine damaged or injured. Please pay special attention to safety operation.

(1) Keep away from people and obstacles

"The flying speed and status of the drone is uncertain, so it may cause potential danger."

When choosing a flying site should stay clear of buildings, trees and power lines. AVOID

flying in or near crowded areas. Meanwhile avoid flying in rain, storms, thunder and

lightening to protect machinery and parts out of damage.

(2) Keep away from humid environments

Inside of drone is made up of precise electronic components. Stay away from humidity or

water vapor to protect machinery and parts.

(3) Safety operation

Please fly your drone according to your physical status and flight skill. Fatigue, listlessness

and mis-operation will increase possibilities of accidental hazard.

(4) Keep away from rotating blades

Keep your face and body as well as all spectators away from the rotating blades. The

spinning blades of a model of this type can cause serious injury.

(5) We recommend flying the drone below 10 meters of height.

(6) Keep away from heat

A drone is made up of metal, fiber, plastic, electronic components, etc. Keep it away from

heat and sunshine to avoid distortion, and damage.

1.3 Check List Before First Flight

(1) Flying field should be in an open space and we suggest at least 5M length *5M wide

*3M height.

(2) Make sure the receiver and transmitter is fully charged.

(3) Please strictly obey the order of turn-on, turn-off before operation. When starting your

flight, first turn on the transmitter, and turn on the drone last; When finishing your flight,

please turn off the drone first, and turn off transmitter last. An upset in the order of

connection may cause your drone loose control to threaten yourself and others safely.

Please follow a correct habit of turn-on and turn-off.

(4) Make sure the connection is solid between battery or motor. The ongoing vibration

may cause bad connection of power terminal and make the drone uncontrollable.

Drone

Replacing the damaged blades:

Your set will come with 4 spare rotors, two type A

and two type B. You will see the "A" and "B" word

on the canopy, then put the rotor on the motor

accordingly

Battery Installation & Charging

Controller

Battery installation should be done under adult supervision only!

Do not mix old and new batteries.

Do not mix different types of batteries.

To install batteries: Open the covers of battery case, then insert 4 x 1.5V AA batteries

according to indicated polarity (batteries not included).

For age 14+

DENVER DRO-120

WWW.DENVER-ELECTRONICS.COM

www.facebook.com/denverelectronics

Please read this instruction manual carefully before using the product

Standard Operation steps

3. Place the drone on a flat

surface

4. Push the throttle up to top

and down to bottom, a beep

will sound: controller has been

connected with the drone

(LED lights on the drone stops flashing)

5. To ascend the drone, push

up the Throttle

(please push up the throttle very slowly,

to avoid the drone rising too fast)

2. Turn on the drone

(Connect the battery plug to drone first)

1. Turn on the controller

(Keep the left joystick at bottom point)

Headless Mode

Start / Quit Headless Mode

Press the button on controller (as picture) you will hear beep sounds and lights on

the drone flashes, then you get into headless mode.

Press it again to quit, beep stops and lights keep on.

At the moment when you start headless mode, the direction that the drone is heading

to will be fixed as the head of drone. No matter how you rotate the drone, the front

direction won’t change accordingly.

One Key Return

Press and hold the button (long press), you will activate One Key Return and the drone

will now attempt to fly back towards its starting point.

If you want to deactivate this mode, then push the right joystick (Rudder) to any direction.

Note: The drone will not land automatically, you still need to control the height of the drone

when using the one key return flying mode.

ENGLISH

Remote Controller

Gyroscope Reset

Before first flying, pull the Throttle to bottom left and

Rudder to bottom right corner at the same time for

2-3 seconds, the lights on the drone flashes quickly,

then let go of the Throttle and Rudder.

When the lights stop flashing and remain on, then

gyroscope reset complete.

Front

Left Right

Back

-07-

Electric and electronic equipment and included batteries contains materials, components and

substances that can be hazardous to your health and the environment, if the waste materials

(discarded electric and electronic equipment and batteries) are not handled correctly.

Electric and electronic equipment and batteries are marked with the crossed out trash can

symbol, as below. This symbol signifies that electric and electronic equipment and batteries

should not be disposed of with other household waste, but should be disposed of separately.

As the end user it is important that you submit your used batteries to the appropriate and

designated facility. In this manner you make sure that the batteries are recycled in

accordance with legislature and will not harm the environment.

All cities have established collection points, where electric and electronic equipment and

batteries can either be submitted free of charge at recycling stations and other collection

sites, or be collected from the households. Additional information is available at the technical

department of your city.

Hereby, Inter Sales A/S declares that the radio equipment type DENVER DRO-120 is in com-

pliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available

at the following internet address: http://www.denver-electronics.com/denver-dro-120/

Operating Frequency Range: 2402 MHz - 2480 MHz

Max Output Power: 5.365 W

Imported by:

DENVER ELECTRONICS A/S

Omega 5A, Soeften

DK-8382 Hinnerup

Denmark

www.facebook.com/denverelectronics

Main Accessories

Flips and rolls

After you have the basics of flying, you’re ready to learn flip and roll your drone.

To perform a flip or roll, make sure the drone is at least 3 meters off the ground. Press

the button Flip, then quickly push the Rudder in either direction to make the drone flip

or roll. Once the manoeuvre is completed, steady the drone.

6. To descend the drone, pull

down the Throttle

(please pull down the throttle very slowly,

to avoid the drone falling too fast or crash)

For Emergency, please pull

down the throttle quickly to

the bottom point

PropellersRemote controller USB Charge cable

Battery

Propeller guards

2 x "AA" Batteries

Battery Cover

batteries batteries

Function indicator

Left Joystick / Throttle

Ascend/Descend/Turn left/Turn right

Speed

Low speed: Di

Mid speed: DiDi

High speed: DiDiDi

Headless / Return

Headless: short press

Return: long press

Right Joystick / Rudder

Forward/Backward/Leftward/Rightward

Flip (short press)

Turn left trim

Turn right trim

Forward trim

Backward trim

Photo / Video

(For camera version only)

Power indicator

Leftward trim

Rightward trim

Denver DRO-120 Drone Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denver DRO-120 Drone

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info