498990
16
Zoom out
Zoom in
Vorherige Seite
1/17
Nächste Seite
Important safety instructions to be kept with the product
Please read attentively
To prevent fire and electric shock, do not expose this receiver to
rain or moisture. In order to avoid any possible risk of electric shock,
never attempt to open the unit. In case of breakdown, reparation
should be made by qualified technicians. No part of this unit should be
re
p
aired b
y
users.
WARNING!
Presence of dangerous tension inside apparatus! Do not open. Risk of electric
shock! No part should be repaired by users. The maintenance of the receiver
should be carried out exclusively by qualified persons.
If the power cord is damaged, it must be replaced or repaired by the manufacturer, its
after-sales service, qualified electrician or persons of similar qualification in order to avoid
possible danger.
The product must be installed in accordance with national regulations.
The used batteries must be disposed of safely. Throw them in collection bins provided is
prohibited (inquire after your retailer for more details) in order to protect the environment.
Proper Installation
- Place the receiver on a flat, firm and stable surface. Do not put it on a carpet or rug.
- Do not place the receiver on top of another device, such as an amplifier. This may lead
to overheating.
- Do not put anything above the unit (for example, CDs or magazines).
Sufficient Ventilation
- Place the receiver in a well-ventilated location to prevent accumulation of internal heat.
Allow a gap of at least 10cm to the rear and the top of the unit, as well as a space of 5cm
to both sides to avoid overheating.
- Do not obstruct any ventilation openings with items such as newspapers, tablecloths,
curtains, etc.
Protecting the Receiver from High Temperatures, Humidity, Water and Dust
- The receiver should not be exposed to dripping water or splashing.
- No objects filled with liquids, such as vases, shall be placed on the unit.
- Do not place any objects that might damage your unit near it (e.g. liquid filled objects or
candles).
- Do not place any source of flames such as lit candles on the receiver.
- This receiver is to be used in a temperate climate and should not be used in a tropical
climate.
Electricity Supply
- Please unplug the receiver in case of prolonged non-use.
- If the power cord is damaged, it must be replaced or repaired by the manufacturer, its
after-sales service, qualified electrician or similar qualifications to those to avoid possible
danger.
- This device must be connected to a 230V ~ 50Hz electrical network.
- The plug must remain readily accessible after the installation of the product.
Welcome Section
Congratulations on choosing to buy a DENVER product. By doing so you now have the
assurance and peace of mind that comes with purchasing a product made by one of the
leading manufactory.
Main features
z Slim size (230mm)
z MPEG-2, MPEG-4(H.264) decoding
z USB2.0 for software update , music ,image, movie and recording
z LCN(Logical Channel Number) supported;
z Parental control
z Favorite lists
z Timer
z EPG/TXT/SUBTITLE supported
z Digital sound through COAXIAL output (S/PDIF)
z PVR ready supported
z CI: Common Interface, to decode digital cable pay TV channels
Automatic Standby: the STB preset to automatically switch from active mode into
standby if 3 hours no interaction and/or channel change from user, with alert message 2
minutes before going into standby. User can choose OFF (turn off this function) or other
hours.
1. Installation of STB ....................................................................................................... 2
1.1 Front Panel ....................................................................................................... 2
1.2 Rear Panel ........................................................................................................ 2
1.3 Connection ....................................................................................................... 3
1.4 Remote ............................................................................................................. 4
2. Installation Guide ........................................................................................................ 5
3. Basic Operation ........................................................................................................... 5
3.1 Program ............................................................................................................ 5
3.2 Picture .............................................................................................................. 6
3.3 Channel Search ................................................................................................ 7
3.4 Time ................................................................................................................. 8
3.5 Option ............................................................................................................... 8
3.6 System ............................................................................................................. 8
3.7 USB .................................................................................................................. 9
3.8 Audio key ........................................................................................................ 10
3.9 TV Channel and radio Channel list ................................................................. 11
4. Other functions introduction .................................................................................... 11
4.1 Program information ....................................................................................... 11
4.2 Favorite List .................................................................................................... 11
4.3 Volume Control ............................................................................................... 12
4.4 Record program .............................................................................................. 12
5. Troubleshooting ........................................................................................................ 13
2
1. Installation of STB
1.1 Front Panel
1. Power: Switch between Standby mode and active mode.
2. CH+/CH-:
Channel +/-,Move cursor up/down
3. on/off: Power lamp, red color in Standby mode, green color in active mode
4. IR sensor: Receive the remote control signal.
5. CI: Common Interface, to decode digital cable pay TV channels, Open the CI slot
door on lower part of the front panel from right side, insert CAM module into CI slot
correctly, insert smart card into the CAM module correctly. CAM module and smart
card are not included, please contact your local TV provider for their information.
Without them, you only can watch free to air digital cable TV channels.
1.2 Rear Panel
1. CABLE IN
Connect cable signal.
2. LOOP OUT
To connect to TV.
3. AUDIO Right and Left
These connectors give you the possibility to connect the audio signal to an external
amplifier, or the audio input of your TV.
4. CVBS
This connector has a constant video signal for additional VCR-connections.
5. S/PDIF
Digital audio signal output
6.TV SCART Connector
Use this connector to connect your receiver to your video recorder using a SCART
cable. Your video signal will now be looped through your receiver to your TV set.
3
7. HDMI
Connecting to the HDMI input on the TV set.
8. USB
It is used for playing wma,m4a, aac, JPEG,BMP,PNG,AVI, XVID,MKV and USB
PVR(USB stickers, mobile HDD with external power supply and FAT32 format).
USB harddisc on products with PVR function:
Please notice that we recommend using a hard disc with OWN power supply on this
unit. This is to ensure that it has enough power to work properly.
You can buy many hard discs without power supply, but our experience is that they
need too much power to work stable. MAXIMUM power for hard discs without power
supply is 500mAh.. If they use more than this, they will fail when recording.
9. Power Cord
1.3 Connection
Note: Before connect this STB to other devices, please close all devices’ power.
1.3.1 Connecting to cable signal
To receive the broadcast signal, the cable signal should be connected to the CABLE IN
connector at the back of the receiver.
1.3.2 Connecting to TV
1. Connect the Audio Left, Right and VIDEO RCA connectors at the back of the receiver
to the Audio Left, Right IN and VIDEO connectors on your TV set.
2. Connect the HDMI connector at the back of the receiver to the HDMI connector on
your TV set.
1.3.3 Connecting to Digital Audio Amplifier
Connect COAXIAL connector at the back of your receiver to appropriated input of your
Digital Audio
4
1.4 Remote
: Switch between operation and standby modes.
: Press to temporarily cut off the sound.
0-9: Enter number or select a channel number to watch.
RCL:
Switches to Last channel viewed.
TV/R: Switch between TV and Radio mode.
MENU: Displays the main menu.
EXIT: Return to the previous menu or escape from the item
OK: Confirm.
: Move cursor up/down/left/right, page up/down,
Volume +/-.Chanel +/-
FAV: Press to display the TV favorite list.
EPG: Shows the EPG (Electronic Program Guide) only
when menu is off.
V+/V-: Volume+/-.
AUDIO: Display the Audio Select window.
INFO: Shows information of the current channel.
FIND: Direct entrance to list of recorded programs
P+/P-: Page up or down in menu list.
PAUSE:
Pause in multimedia playback & timeshift
SUB:
Show the list of subtitled languages the current.
channel supports.
TEXT:
Shows current service’s Teletext on OSD.
REC: Records a live program.
:
Slow playing.
:
Fast playing.
Stop.
Colored buttons (RED, GREEN, YELLOW, BLUE):
special function keys, there is function description in menu bottom side, different functions in
different menu option.
NOTE: GOTO function---under menu of Music, Movie, PVR, press blue color button, show
GOTO on menu, then input time which you want.
Play in multimedia playback & timeshift
5
2. Installation Guide
After all connections have been made
properly, switch on TV and make sure the
receiver is connected to the Main Power.
Press Power button to switch receiver on. If
you are using the receiver for the first time or
restored to Factory Default, the Main Menu
will appear on your TV screen.
(1) Select [OSD Language] and press
RIGHT/LEFT key to select an language
(2) Select [Channel Search] and press
RIGHT or OK key to begin Automatic
channel search
(3) Once channel tuning is complete, you are now ready to watch TV
3. Basic Operation
3.1 Program
To access the Menu, press the MENU
button and select [Program]. The Menu
provides options to adjust the Program
Manage Settings. Select an option and press
OK or RIGHT to adjust that setting. Press
the EXIT button to exit the Menu.
3.1.1 Program Edit
To edit your program preferences (lock,
skip, favourite, move or delete), you will
need to enter the Program Edit Menu. This
Menu requires a password to access. Enter
the default password '000000'.
3.1.2 EPG (Electronic program guide)
The EPG is an on-screen TV guide that
shows scheduled programs seven days in
advance for every tuned channel. Press the
EPG button on the Remote Control to
access guide.
When entering EPG for the first time on
a channel it can take up to 2 minutes
before EPG is fully shown. If you
change channels, the 2-minute loading
time can be starting over again. This is
not an error, but a normal waiting time
6
for the EPG to load”.
You can use the UP/DOWN key to select the preferred program. If there is more
than one page of information, use the YELLOW button for page down and the BLUE
button for page up.
Press “OK” key, you can view or record program by timer
Timer record
Press the UP/DOWN key to select one
program, press OK key, the event add menu
will display.
In this menu, you can select the channel
number which you want to record, set the
start date, start time, end time and select the
repeat mode(Once, Daily or Weekly), then
set the mode to Record, press Ok to save
the timer. This channel will be recorded
automatically by the timer.
3.1.3 Sort
Sort your channels from the following options:
[LCN] - Sort the channels in ascending order
[Service Name] - Sort the channels in alphabetical order
[Service ID] - Sort the channels according to the station
3.1.4 LCN (Logical channel number)
Set LCN on or off.
3.1.5 Common Interface
In this menu, you can view the CI part
information.
3.2 Picture
To access the Menu, press MENU then
select [Picture]. The Menu provides options
to adjust the video settings. Press
UP/DOWN to select an option and press
RIGHT/LEFT to adjust that setting. Press
EXIT to exit the menu.
(1). Aspect Ratio
You must set the display format to
either4:3 Full, 4:3 Pan& Scan, 4:3 Letter Box,
16:9 Wide Screen or Auto to get the
maximum display when watching TV.
(2). Resolution
If the video does not appear correctly, change the setting. This setting is to match
the most common setting for HDMI.
[576i]: for PAL system TV.
8
3.3.4 Standby Loop Through
You can select Standby Loop Through On or Off.
Default setting is Off, when you connect the Loop Out port on the back of the box to
TV or VCR etc, signal will be distorted on your TV/VCR when the box is in standby mode.
You need to select ON, to let normal antenna signal looped through.
3.4 Time
To access the menu, press MENU then
select [Time]. The menu provides options to
adjust the time settings.
Press UP/DOWN to select an option and
press RIGHT/LEFT to adjust the setting.
Press EXIT to exit the menu.
(1) Time offset
Select auto or manual for GMT offset
adjustments.
(2) Time Zone
Select the Time Zone Offset when [Time
Offset] is set to Manual.
(3) Sleep
Select the Sleep time.
The machine will automatic switch off after 3 hours without user activity.
(4) Record Time Period
Select the record time period.
3.5 Option
To access the menu, press MENU and
select [Option]. The menu provides options
to adjust the OSD Language, Subtitle
Language, Audio Language, Digital Audio,
OSD Transparency and Info bar Show Time.
Select an option and press RIGHT/LEFT to
adjust the setting. Press EXIT to exit the
Menu.
3.6 System
To access the menu, press MENU and
select [System]. The menu provides options
to adjust the system settings.
Press the UP/DOWN key to select an
option and press RIGHT/LEFT to adjust the
setting.
Press EXIT to exit the Menu.
(1) Parental Guidance
You can restrict access to channels that are unsuitable for children. To restrict/lock
9
the channel you will need to enter either the default password '000000' or your own
password.
(2) Set Password
Set or change the password for locked programs. Enter your old password or the
default password '000000'. You will then be asked to enter your new password. To
confirm re-enter your new password. Once it is confirmed, press EXIT to exit the Menu.
(3) Restore Factory Default
Reset your Set Top Box to the Default Factory Settings.
In Main Menu select [Restore Factory Default] and press OK or RIGHT to select.
Enter your password or the default password '000000' and press OK to confirm. This
option will delete all preset channels and settings.
(4) Information
View model, hardware and software information.
3.7 USB
This menu contains four functions:
Mutimedia, Photo Configure and USB
Upgrade.
3.7.1 Mutimedia
You can play music, view the photo, see
the movie and PVR.
Multimedia player feature also has been integrated on the receiver. You could show
your preference photo, playing music and movie on multimedia player. Known supported
file were illustration below. NTFS, FAT32 and FAT16 file system could be supported at
the moment.
Player Supported file
Photo JPEG, BMP, PNG
Music *.wma, *.m4a, *.aac
Movie *.AVI, *.MKV, *.XviD, *.mpeg, *.dat, *.vob, *.ts, *.mp4(GMC not
supported), *.motion JPEG
10
3.7.2 Photo Configure
You can set Slide Time, Slide Mode and
Aspect Ration.
3.7.3 Movie Configure
In this menu, you can set Subtitle Specific,
Subtitle BG and Subtitle Fontcolor.
3.7.4 PVR Configure
This menu contains Record Device and
Format.
Record Device:
you can view record
device information.
Format: you can format the device.
3.8 Audio key
The program might have multilingual
audio language and the audio broadcast on
different audio mode such as Stereo, Left or
Right. All the available audio languages will
display on the audio track windows while you
press AUDIO key. The screenshot is
illustrated below. If there is no audio output
after you select the audio language, it
indicates that there is no audio on the current
audio mode, so you have to select preferable
audio mode.
11
3.9 TV Channel and radio Channel list
Press OK key to display all TV channel
or all Radio channel. Follow the help
information at the bottom of the window to
select preference channel.
4. Other functions introduction
4.1 Program information
If you press the INFO button once, a banner is displayed on the upper part of the screen,
and if you press the button again before the upper banner is disappeared, the banner will
show the details of the currents channel.
4.2 Favorite List
If you press “FAV” on the remote controller at
No menu state, the favorite group list will be
displayed on the screen. You can select one
favorite group and press “OK” key to enter
the favorite channel list.
13
5. Troubleshooting
There may be various reasons for the abnormal operation of the receiver. Check the
receiver according to the procedures shown below. If the receiver does not work properly
after checking it, please contact the dealer. Don’t open the receiver cover. This may
cause a dangerous situation.
Symptom Cause Remedy
The LED display
on front panel
does not light up.
The power cord is not
plugged in.
Check that the power cord is
plugged in to the wall outlet.
No picture or
sound
Wrong connection of
the Audio/ Video
output of the receiver
to TV. Audio muting.
TV power off.
Connect the Audio/ Video output
of the receiver to TV correctly.
Press the MUTE button Turn TV
on.
No picture The receiver can’t
receive the signal
Incorrect values of
some tuner
parameters Wrong
direction of the
antenna.
Check the antenna cable, replace
the cable, or connect the cable to
the receiver tightly. Set the values
of the tuner parameters correctly
in the installation menu. Check
the antenna connect.
The remote control
does not work
The batteries of the
remote control are not
inserted or exhausted
Check whether the batteries are
inserted correctly in your remote
control. Check the batteries, and
if exhausted replace the batteries
in the remote control.
Tips If you refer to this troubleshooting, but no resolve that problem you encountered.
Please you contact the local dealer or technical support instantly, don’t to discover the machine,
because that do is very danger, and it damage that machine in that cases.
14
Electric and electronic equipment and included batteries contains
materials, components and substances that can be hazardous to your
health and the environment, if the waste material (discarded electric
and electronic equipment and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the
crossed out trash can symbol, seen below. This symbol signifies that
electric and electronic equipment and batteries should not be disposed of with other
household waste, but should be disposed of separately.
As the end user it is important that you submit your used batteries to the approriate
and designated facility. In this manner you make sure that the batteries are recycled
in accordance with legislature and will not harm the environment.
All cities have established collection points, where electric and electronic equipment
and batteries can either be submitted free of charge at recycling stations and other
collection sites, or be collected from the households. Additional information is
available at the technical department of your city.
ALL RIGHTS RESERVED:
COPYRIGHT DENVER ELECTRONICS A/S
www.denver-electronics.com
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denver DVBC-122CI wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info