Enter into Setup mode, input #2#23456789#
You hear "Operation succeeded": the setup is successful.
Up to 10 phone numbers can be stored.
Note
The 1st to the 5th stored phone numbers are for calls from the alarm system.
The 6th to the 10th phone numbers are for SMS alert messages.
You hear "Operation succeeded": the setup is successful.
4.5 Delete Phone Numbers
Example: delete the 1st phone number.
Enter into Setup mode, type "#1##"
You hear "Operation succeeded": the setup is successful.
Example: delete the 2nd phone number.
Enter setup mode, type "#2##"
You hear "Operation succeeded": the setup is successful.
Note
Delete all existing phone numbers: "#*##"
4.6 Exit Setup Mode
Press the Disarm key on the control panel to exit the Setup mode until you hear 2 beeps and
the setup LED indicator blacks out: the system has exited the Setup mode
4.7 Alarm Response When Being Out of Home
If the system detects an intrusion, the siren will ring out immediately, and the control panel will
send alert SMS and dial the pre-stored phone numbers. The user can monitor the site from
distance and control the system by phone when receiving the call from the alarm system.
Note
No need to type password to control the system from distance when receiving the call from the
alarm system.
4.8 Control by Phone Call
Method 1
When an alarm has been triggered, the control panel dials the pre-stored phone numbers.
When you take the call, you can control the panel from distance according to the instructions in
the table below.
Method 2
1. Dial the telephone number of the SIM card in your control panel.
2. Enter your password followed by "#".
3. Select the operations to control the panel (see instructions in the table below).
Note
The call will end automatically if you do not send any command within 30 seconds.
*Default password is 1234.
