Bedienungsanleitung Denver IPT-400 (Seite 3 von 6) (Englisch)

499130

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

4 5

6. Press PLAYLIST UP/DOWN button to cycle through the playlists on the connected

iPod/iPhone.

7. Press ALBUM UP/DOWN button to select your desired album for playback on the

connected iPod/iPhone.

8. Press CHAPTER+/- button to select a corresponding chapter for playback.

9. Press and hold CLOCK VIEW/SHUFFLE button to enable or disable the shuffle function.

10. Press REPEAT/ST button repeatedly to cycle through the repeat options (repeat 1,

repeat album and repeat off).

FM RADIO

TUNING THE FM RADIO

1. Power on the unit, switch to TUNER(RADIO) mode by pressing SOURCE repeatedly.

2. Press TUN UP/DOWN button on the unit or TUN+/- button on the remote to fine tune

radio station. Press and hold TUN UP/DOWN button on the unit or TUN +/- button on the

remote to auto search radio station forward or backward respectively (When an available

station will be found, the unit will broadcast it immediately and the searching will be

stopped).

3. At radio mode, it is possible to access the frequency via numeric buttons on the remote

control. For example, press buttons 8, 9 and 8 to get to 89.8 MHz; If access a wrong

frequency, "ERROR" will display on the screen.

4. During radio playback, press REPEAT/ST button on the remote to switch between FM

STEREO and FM MONO modes.

STORING YOUR FAVORITE RADIO STATION

1. During playback, press and hold PLAY/PAUSE button on the unit or PLAY/PAUSE&TIME

SET/MEM button on the remote for storing the current station until memory cell number

"P01" flashes on the screen.

2. Use TUN UP/DOWN button on the unit or TUN+/- button on the remote to select the

corresponding memory cell among P01-P20 for storing the station.

3. Confirm your selection by pressing PLAY/PAUSE button on the unit or

PLAY/PAUSE&TIME SET/MEM button on the remote.

4. During radio playback, press PLAY/PAUSE button on the unit or PLAY/PAUSE&TIME

SET/MEM button on the remote repeatedly to recall the stored stations.

MUTE THE UNIT

During playback, press MUTE button to switch off the audio. Press the button again to

resume the audio.

VOLUME LEVEL/TREBLE/BASS ADJUSTMENT

Press VOLUME +/- button or TREBLE +/- button or BASS +/- button to adjust the volume

output level or treble effect or bass effect.

RESET BUTTON

When using the unit, you will come across some problems that the unit doesn't work or halt

accidentally; you can use a needle or a small, slender implement to poke the RESET button

in the rear of the player, the unit will turn off automatically and then please reboot the unit,

the unit will recover the normal mode.

DIMMER

During playback, press DIMMER button to adjust the light of the LCD screen.

CONNECTING WITH OTHER APPLIANCES

LINE IN

Follow steps to connect the unit to another audio device:

1. Connect the device into the player LINE IN jack with the LINE OUT cables.

2. Press POWER button to turn the unit on.

3. Press SOURCE button repeatedly to switch the unit to Line In mode.

4. Power on the device and begin play.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denver IPT-400 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denver IPT-400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info