Bedienungsanleitung Denver MCI-102 (Seite 53 von 57) (Deutsch, Englisch, Holländisch, Dänisch, Portugiesisch, Spanisch, Schwedisch, Finnisch)

499211

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

OPERATION WITH THE iPod/ iPhone

- TURN ON BOTH THE UNIT AND THE iPod/ iPhone.

- PRESS THE KEY REPEATEDLY UNTIL THE DISPLAY SHOWS “iPod”

OR SIMPLY PRESS THE "DOCK" KEY ON REMOTE CONTROL.

- THE UNIT WILL AUTOMATICALLY START PLAYBACK OF THE SONGS.

- THE iPod DISPLAY WILL INDICATE THE INFORMATION OF THE CURRENT

SONG (TRACK).

/ iPhone

- AT ANYTIME DURING PLAYBACK, PRESS THE KEY

TO PAUSE OPERATION OF THE UNIT. PRESS KEY TO RESUME

OPERATION AT THE SAME TRACK & POSITION.

- AT ANYTIME DURING PLAYBACK, PRESS & HOLD THE KEY

TO STOP PLAYBACK OF UNIT.

- AT ANYTIME DURING PLAYBACK, PRESS AND RELEASE THE

KEYS ON UNIT (OR "iPod NEXT/ iPod BACK" KEY ON REMOTE

CONTROL) TO SKIP FORWARD OR BACKWARDS BY ONE TRACK, AS DESIRED.

PLAY/PAUSE

- ANY ANYTIME DURING PLAYBACK, PRESS AND HOLD THE

KEYS ON UNIT (OR "iPod NEXT/ iPod BACK" KEY ON REMOTE

CONTROL) TO FAST-FORWARD (CUE) OR FAST-REVERSE (REVIEW)

THE SPECIFIC TRACK, WHICH IS CURRENTLY PLAYING.

- YOU CAN OPERATE THE iPod USING EITHER THE SET, REMOTE CONTROL

OR DIRECTLY WITH THE iPod ITSELF.

- WHEN THE iPod HAS BEEN CONNECTED WITH THE UNIT, IT WILL START

CHARGING THE BATTERY OF THE iPod .

/ iPhone

- NEVER REMOVE (OR UNPLUG) THE iPod/ iPhone FROM THE SET DURING PLAYBACK,

ALWAYS PRESS & HOLD FOR 2 SECONDS THE KEY FIRST AND THEN

PRESS THE KEY TO SWITCH TO ANOTHER SOURCE (EG. “RADIO”

OR “AUX”) BEFORE REMOVING OR UNPLUGGING THE iPod/ iPhone,

TO PREVENT DAMAGE TO YOUR SONG FILES OR MEMORY DEVICES.

FUNCTION

PLAY/PAUSE

FUNCTION

REPEAT PLAYBACK FUNCTION (iPod/ iPhone)

- AT ANYTIME DURING iPod/ iPhone PLAYBACK:

- PRESS THE "PLAY MODE" KEY ON REMOTE CONTROL OR

PRESS THE FOLLOWING SYMBOLS ON THE iPod/ iPhone SCREEN:

= TO REPEAT THE CURRENT TRACK

= TO REPEAT ALL TRACKS

THIS UNIT IS DESIGNED TO ALLOW YOU TO CONNECT AN WITHOUT THE

NEED FOR DOCK CONNECTORS. THE DESIGN OF THE UNIT HAS BEEN STRUCTURED

TO PROVIDE SUPPORT TO TE CONNECTOR UNDER NORMAL USAGE WITHOUT EXCESSIVE

PRESSURE ON THE WHEN CONTROLLING PLAYBACK USING THE

SCREEN.

iPod/ iPhone

iPod/ iPhone iPod/ iPhone

"Made for iPod," "Made for iPhone," mean that an electronic accessory has

been designed to connect specifically to iPod, iPhone, respectively, and has been certified

by the developer to meet Apple performance standards. Apple is not responsible for the operation

of this device or its compliance with safety and regulatory standards. Please note that the use

of this accessory with iPod, iPhone may affect wireless performance.

BACK/ TUNE -

NEXT/ TUNE +

BACK/ TUNE -

NEXT/ TUNE +

E-7

E-8

ELECTRONIC VOLUME CONTROL

- THIS UNIT USES AN ELECTRONIC VOLUME CONTROL .

- TO INCREASE OR DECREASE THE LOUDNESS OF UNIT, PRESS

THE VOLUME UP (VOL +) OR VOLUME DOWN (VOL -) KEYS RESPECTIVELY.

- RELEASE THE KEY WHEN VOLUME LEVEL IS AT THE DESIRED LOUDNESS.

- SOMETIMES, ESPECIALLY DURING LISTENING TO THE RADIO, YOU MAY NOTICE

A "CLICK-CLICK-CLICK" (REPEATING) SOUND WHEN YOU ARE INCREASING OR

DECREASING THE VOLUME. THIS IS A NORMAL CONDITION & THE SOUND WILL

DISAPPEAR WHEN YOU RELEASE THE VOLUME KEY (WHEN YOU REACH THE

DESIRED VOLUME LEVEL).

(PUSH BUTTON TYPE)

OPERATION OF RADIO

- PRESS THE "ON/OFF" KEY ONCE TO SWITCH ON THE UNIT.

- PRESS THE KEY (ON UNIT) REPEATEDLY UNTIL THE DISPLAY

SHOWS "FM" .

- TO IMPROVE FM-RADIO RECEPTION, FULLY EXTEND THE FM-ANTENNA WIRE

AND ADJUST IT'S POSITION.

- USE THE "FM MODE" KEY (ON REMOTE CONTROL) TO SELECT THE

DESIRED MODE ( . IN SOME CASES, WHERE RECEPTION IS

POOR, IT MAY BE ADVISABLE TO SELECT “MONO” MODE, TO IMPROVE CLARITY

OF THE RADIO SIGNAL.

OR PRESS THE "TUNER" KEY ONCE ON REMOTE CONTROL

FM MONO/STEREO)

MANUAL FREQUENCY ADJUSTMENT (SCAN MODE)

- PRESS (AND IMMEDIATELY RELEASE) THE KEY OR

KEY TO “SCAN” (MANUALLY ADJUST) THE RADIO FREQUENCY “UP” OR “DOWN”

BY 1-STEP AT A TIME.

- THE RADIO DIGITAL DISPLAY WILL INDICATE THE EXACT FREQUENCY AT EACH

STEP’S POSITION.

- WHEN A DESIRED FREQUENCY OR STATION IS REACHED. IT CAN BE SAVED

INTO ONE OF THE “MEMORY” POSITIONS. (SEE “RADIO MEMORY” SECTION).

NEXT BACK

AUTOMATIC FREQUENCY ADJUSTMENT (SEEK MODE)

- PRESS AND HOLD (FOR 2 SECONDS) THE OR KEYS

TO “SEEK” (AUTOMATICALLY ADJUST) THE RADIO FREQUENCY “UP” OR “DOWN”

TO THE NEXT AVAILABLE RADIO STATION.

- THE RADIO DIGITAL DISPLAY WILL INDICATE THE EXACT FREQUENCY OF THE

NEXT STATION THAT IS FOUND.

- WHEN A DESIRED STATION IS REACHED. IT CAN BE SAVED INTO ONE OF THE

“MEMORY” POSITIONS. (SEE “RADIO MEMORY” SECTION).

NEXT BACK

FUNCTION

RADIO MEMORY (STATION PRESET MEMORY STORAGE)

- AT ANY TIME, THE CURRENTLY DISPLAYED STATION OR FREQUENCY CAN BE

STORED INTO ONE OF THE MEMORY POSITION.

- PRESS KEY ONCE.

- PRESS OR KEY ON THE REMOTE CONTROL TO SELECT

DESIRED MEMORY POSITION. (THERE ARE 30 MEMORY POSITIONS FOR FM BAND).

- PRESS KEY ONCE TO SAVE THE SELECTED STATION INTO THE

SELECTED MEMORY POSITION.

- TO RECALL ANY SAVED MEMORY, SIMPLY PRESS ,

THE SAVED RADIO-BAND WILL BE RECALLED.

- TO CLEAR THE MEMORY OF ANY POSITION, SIMPLY SAVE A NEW STATION TO

THE SAME MEMORY POSITION.

PROGRAM

RADIO M+

PROGRAM

RADIO M-

RADIO M+ RADIO M-

Denver MCI-102 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info