694766
4
Zoom out
Zoom in
Vorherige Seite
1/5
Nächste Seite
CONNECTING & PLAYING MEDIA
Loading and Playing a Disc
1. Slide the Open latch to open the Disc Door.
2. Load a disc into the DVD player, label side facing up. Close the Disc Door. After a disc is
loaded, it will begin playing automatically.
3. If the disc does not begin playing automatically, press the Play/Pause button.
Programming a Loaded Disc
1. While the loaded disc is playing, press the PROG button on the remote control.
2. Use the Arrow buttons to select a program slot.
3. Use the Number Keypad to enter in the chapter and title, or track.
4. Titles and chapters, or tracks will play in the order they are listed.
5. Repeat step 3 until the desired titles and chapters, or tracks are programmed.
6. Use the Arrow buttons to highlight the on-screen START button. Press the OK button to begin
playing the programmed disc.
Connecting a USB Thumb Drive
AVI, VOB, MPEG 1, MPEG 2 and MPEG 4 video formats are supported.
1. Connect a USB thumb drive to the USB Port.
2. Press the DVD/SD/USB button to enter DVD/SD/USB mode.
3. Use the Up/Down Arrow and Play buttons to select USB mode and play content from the
connected USB thumb drive.
Connecting a Memory Card
AVI, VOB, MPEG 1, MPEG 2 and MPEG 4 video formats are supported. Note: Formats are not universally
compatible. Playback may be dependent on recording conditions.
1. Connect a SD or MMC memory card to the Memory Card Port.
2. Press the DVD/SD/USB button to enter DVD/MCR/USB mode.
3. Use the Up/Down Arrow and Play buttons to select MCR mode and play content from the
connected memory card.
Accessing the Setup Menu
To access the Setup Menu, press the Setup button on the DVD player or the remote control.
Using the 3.5mm AV Output
Require a 3.5mm to 3x RCA audio/video cable (included).
1. Connect the 3.5mm to 3x RCA audio/video cable to the AV Output on the unit’s display.
2. Connect the 3.5mm to 3x RCA audio/video cable to the RCA stereo audio inputs and
composite video input on a television.
3. Audio and video played through the portable DVD player will now be seen and heard through the
connected television.
Using the 3.5mm AV Input
Require a 3.5mm to 3 x RCA audio/video cable (included).
1. Connect the 3.5mm to 3 x RCA audio/video cable to the 3.5mm AV Input on the portable DVD
player and the composite video outputs on an audio/video source such, as a television.
2. Press the DVD/AV In button to switch to AV In mode.
3. Audio and video played from the connected source a television will now be output to the
portable DVD player.
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denver MT-1084NB wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Denver MT-1084NB

Denver MT-1084NB Bedienungsanleitung - Deutsch - 6 seiten

Denver MT-1084NB Bedienungsanleitung - Holländisch - 6 seiten

Denver MT-1084NB Bedienungsanleitung - Französisch - 5 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info