Bedienungsanleitung Denver MT-779DVBT (Seite 7 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Spanisch, Schwedisch)

499067

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

DVB-T SETUP MENU

1. Press SETUP Button once, the setup menu will be called

out on the screen.

2. Use navigation LEFT/RIGHT button to switch among the

three different main setup interfaces. Press navigation

UP/DOWN button to highlight the setting options and enter

corresponding submenu as indication. After setting, press

SETUP button to go back main setup interface.

3. Use SETUP button to exit setup menu.

1. Channel Guide

TV channels - It is used to enter the TV channels list for you to

select or sort the TV channels as your desired.

Radio channels - It is used to enter the Radio channels list for

you to select or sort the Radio channels as your desired.

Channels class - Select this option to edit the programs as

your desired.

Channels edit - Select this option to edit the channels name,

move or delete the channels as your desired.

2. System config

TV setting

TV system: it is used to select TV system.

TV type: it is used to select the TV scan mode, please set as

per your TV set.

Options: 4:3PS : Normal Pan & scan mode

4:3LB : Normal Letter box mode

16:9 : 16:9 wide screen mode

Video setting

BRIGHTNESS - to set the brightness for the display.

CONTRAST - to set the contrast effect for display.

HUE - to set the colour impression for display.

SATURATION - to set the saturation level for display.

Language

Please select one of desired language for the system.

Parent Control

Change pin - It is used to change the password.

1) Enter old password in the OLD PIN row

2) Enter new password in the NEW PIN row

3) Enter the new password again in the CONFIRM row

The default user password is 0000.

Channel lock - it is used to lock the channels.

Time setting

Time zone - it is used to select local time zone.

System info

Select this option, the system info shows on the screen such

as: Update date, Tuner info, F/W version Model version etc.

3. Installation

Auto Scan - select one of country from <select area> row,

then enter <start scan> row by navigation button to begin

scanning the channels.

Manual scan - scroll to manual scan option, a dialogue shows

on the screen for you to set, after then, select <start scan>

option to begin scanning the channels.

Default setup - select this option to restore the factory setting.

DISC HANDLING PRECAUTIONS

y Hold the disc by the edge so the surface will not

be soiled with finger prints. Finger prints, dirt and

scratches can cause skipping and distortion.

y Do not write on the label side with a ball-point pen

or other writing utensils.

y Do not apply benzine, thinner, and liquid that

prevents against static electricity.

y Be careful not to drop or bend the disc.

y Install only one disc on the disc tray.

y Do not try to close the disc tray when the disc is

not installed properly.

y Be sure to store the disc in its case when not in

use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denver MT-779DVBT Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info