22
One-touch memory
Programming the One touch-memory
The set should be connected to a phone line and
switched to TALK mode. Then you can begin
programming your memory locations.
Press the S key. Enter the number using the main
keypad, press on M1 or M2 or M3 to store the
number in that location.
If you want to store a pause, press the P key at the
appropriate part of the number entry sequence and
a pause will be stored (P = 3 seconds).
Dialing Using the Two Touch Memory
Put the testset into TALK mode by moving the TALK
- MON switch to the TALK position, confirm that you
have dial tone and then press. The One Touch
Memory button for the number you want to call. The
testset will dial the number in that location.
Two touch memory
Programming the Two touch-memory
The set should be connected to a phone line and
switched to TALK mode.
Then you can begin programming the Two Touch
memory locations.
Press the S key on the small keypad. Enter the
number you want to store by using the main keypad,
press the MR key again followed by a press on one
of the numeric keys on the main keypad to store the
number in that location.
If you want to store a pause, press the P key at the
appropriate part of the number entry sequence and
a pause will be stored.
Dialing Using the Two Touch Memory
Put the testset into TALK mode by moving the TALK
- MON switch to the TALK position, confirm that you
have dial tone. Press the MR (Memory Recall) key
on the main keypad, then press the numeric key on
the main keypad for the number you want to call.
The testset will dial the number in that location.
