STARTER MOTOR
- In the event that the starter motor
does not turn, the following causes
are possible:
- Main fuse, disconnected or
blown.
- Battery discharged.
- Faulty starter relay.
- Replace the fuse and / or charge
the battery as necessary.
- If the starter motor still will not turn,
proceed to check the electrical
wiring and the starter push button
on the handlebars, and the starter
relay in the following manner:
- Connect terminals 85 and 86 of the
relay to the battery terminals
(regardless of polarity).
- Connect terminals 30 and 87 of the
relay to the ends of the tester pro-
bes, having selected “continuity /
ohms Ω“ (resistance measurement):
* Without disconnecting the tester pro-
bes from the terminals 30 and 87 of
the relay, disconnect one of the ter-
minals 85 or 86 from the battery ter-
minals:
- In the event that the sequence
shown in the above tables is not
observed, replace the relay.
14-1
READING OHMS RELAY
(Ω) CONDITION
0 (closed cirduit) CORRECT
∞ (open circuit) FAULTY
READING OHMS RELAY
(Ω) CONDITIONS
0 (closed circuit) FAULTY
∞ (open circuit) CORRECT
