Bedienungsanleitung Derby Cycle Pedelec Xion 2013 (Seite 43 von 259) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

658408

Zoom out

Zoom in

Vorherige Seite

1/259

Nächste Seite

10 VIII User Manual Pedelec Xion

7. Make sure that the battery is securely positioned and

that the key is no longer in the lock.

8. Press the diamond button on the control panel to

switch on the drive system.

9. The display panel now displays the medium power-

assist mode. The assist level is represented by a bar

with a maximum of ve light elements on the far le

of the display panel. By pressing one of the two arrow

buttons on the control panel, you can select the level

of assistance. Pressing once changes the level of assis-

tance by one level. This works both ways, depending

on which arrow button you press.

10. You can also use the arrow button to set the assistance

om the motor to zero and begin energy recovery

(➠ Chapter 6.2.1 “Energy recovery”).

11. You can now ride o just as you would if you were

riding a normal bike. The motor starts providing assis-

tance as soon as you begin to pedal.

From the rst moment on, you have ll assistance.

This is unfamiliar but comfortable. Practice starting

up in a safe location before venturing into the road

trac.

2 Legal principles

The essential idea behind the Pedelec is not only to be

able to cover greater distances more quickly, but also

more comfortably. You can choose to relax and let the bike

do the work, exert yourself more physically, or simply get

om A to B as fast as possible. You can decide this your-

self by choosing an appropriate power-assist mode.

This gives you more condence on the road, as the power-

l acceleration gives you more control and a greater

degree of security. Your Pedelec assists you with an output

that adapts to your pedalling force up to roughly 25 km/h.

The Pedelec, like all other bikes, must comply with the

national regulations for road safety. Please observe the

relevant explanations and general information provided in

the General User Manual.

These statutory requirements apply for a Pedelec:

• The motor is designed only to provide pedalling

assistance, i.e. it can only “assist” the rider when

he/she turns the pedals.

• The average motor output must not exceed 250 W.

• As the speed increases, the rate at which the motor

output reduces must also increase more intensely.

• The motor must switch o once the bike reaches a

speed of 25km/h.

2.1 Meaning for the rider

• You do not legally have to wear a helmet. In the

interest of your own safety, however, you should

never ride without a helmet.

• You do not legally have to have a driving licence.

• You do not legally have to have insurance.

• No age restriction applies for a Pedelec.

• The regulations governing the use of cycle paths

are the same as for normal bikes.

These regulations apply to you wherever you are in the

European Union. It is possible that dierent regulations

exist in other countries, also inside the EU in individual

cases. Before using your Pedelec abroad, nd out about

the legal situation in the relevant country.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Derby Cycle Pedelec Xion 2013 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info