598713
18
Zoom out
Zoom in
Vorherige Seite
1/21
Nächste Seite
Appendix
|
|
devolo MicroLink 56k Fun USB
|
18
EN
For advanced users: Numbers for accessing outside lines and wait commands
can also be typed in manually in front of the phone number. Because a delay
can occur after the number for an outside line is dialed and before the outside
line is connected by the PBX, you may have to specify pauses between the
outside line number and the phone number (indicated by one or more
commas, for example: 0,,12345), or better yet, use the wait command (w). For
most private branch exchanges, 0w (e.g. 0w12345) is sufficient. Under
Windows 2000, letters cannot be used in dialing parameters. Instead, use
commas after the outside line number (e.g. 0,,12345).
Question
Why does my Internet connection suddenly disconnect
without me wanting it to, and why is it so slow (slower
than on other analog connections)?
Causes
The hardware installation within the computer case has to be clean and
correct. By clean and correct, we mean: few junction boxes, and tightly,
cleanly and correctly connected electrical connections (using screws and
fasteners), etc. Magnetic and electric fields, such as halogen desk lamps
placed on the modem, can cause interference.
For lack of enough available phone jacks, two devices may have to share
the same physical line. To this purpose, multiplexers are installed at the
customer junction line point. If a multiplexer is in use, fast V.90
connections are not possible. Instead, the top transfer rate will be 33.6
Kbps. You can contact your telephone service company for more
information and to find out if a multiplexer is installed on your line. In
Germany, business subscribers call Telekom at 0800/3301172, and
residential subscribers call 0800/3302000.
Find out whether any additional services are enabled for the analog
network, such as call charge metering, call waiting, etc. The signals sent
over your line by such services have little effect on voice calls. However,
they act as noise interference on a data line and should be disabled for
the duration of data connections. In apartment buildings especially, many
phone jacks are installed and used on many floors. Often, the
installations of these terminals are parallel, which is a code violation in
Germany. Germany's telephone networking codes require that the house
connection is nonreflecting at a specific impedance. Connecting several
devices having the same impedance in parallel reduces the total
impedance. This should be avoided as much as possible. A clean
technical solution to this is the so-called telephone toggle switches,
which prevent a second phone to listen in on an existing call, or small
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Devolo MicroLink 56k Fun USB wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Devolo MicroLink 56k Fun USB

Devolo MicroLink 56k Fun USB Bedienungsanleitung - Deutsch - 21 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info