Bedienungsanleitung DeWalt D 23550 (Seite 36 von 140) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

110214

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

ENGLISH

MOUNTING

1. Slacken the locking screw (v) as to allow the

parallel fence to pass.

2. Insert the parallel fence (o) in the saw shoe (f) as

shown.

3. Tighten the locking screw (v).

ADJUSTING

1. Slacken the locking screw (v) and set the

parallel fence (o) to the desired width.

2. Tighten the locking screw (v).

Prior to Operation

– Make sure the guards have been mounted

correctly. The saw blade guard must be in

closed position.

– Make sure the saw blade rotates in the direction

of the arrow on the blade.

OPERATION

Instructions for Use

WARNING: Always observe the safety

instructions and applicable regulations.

WARNING: To reduce the risk

of serious personal injury, turn

tool off and disconnect tool from

power source before making any

adjustments or removing/installing

attachments or accessories.

WARNING:

• Always observe the safety instructions

and applicable regulations.

• Ensure the material to be sawn is

firmly secured in place.

• Apply only a gentle pressure to the

tool and do not exert side pressure on

the saw blade.

• Avoid overloading.

• Do not use excessively worn saw

blades.

• Do not use your saw for pocket cuts.

Proper Hand Position (ﬁ g. 1, 8)

WARNING: To reduce the risk of

serious personal injury, ALWAYS use

proper hand position as shown.

WARNING: To reduce the risk of

serious personal injury, ALWAYS hold

securely in anticipation of a sudden

reaction.

Proper hand position requires one hand on the main

handle (x) with the other hand on the front handle (c).

Switching On and Off (ﬁ g. 1, 2)

For safety reasons the trigger switch (a) of your tool

is equipped with a lock-off button (b).

1. Press the lock-off button to unlock the tool.

2. Press the trigger switch (a) to run the tool.

As soon as the trigger switch is released the

lock-off switch is automatically activated to

prevent unintended starting of the machine.

WARNING:

• Do not switch the tool on or off when

the saw blade touches the workpiece

or other materials.

• Do not operate the spindle lock while

the tool is running.

Guiding the Tool (ﬁ g. 1, 2)

• For optimum results, clamp the workpiece

bottom up.

• Follow the line drawn on the workpiece using

the mark (m).

• In case of a bevel angle of 45°, follow the line

drawn on the workpiece using the mark (l).

WARNING: ALWAYS lead the cord

away in line with the rear of the tool

Dust Extraction (ﬁ g. 1)

WARNING: Risk of dust inhalation.

To reduce the risk of personal injury,

ALWAYS wear an approved dust mask.

Your tool is fitted with a dust extraction outlet (e).

Whenever possible, connect a dust extraction device

designed in accordance with the relevant regulations

regarding dust emission.

WARNING: ALWAYS use a vacuum

extractor designed in compliance with

the applicable directives regarding dust

emission when sawing wood. Vacuum

hoses of most common vacuum

cleaners will fit directly into the dust

extraction outlet.

WARNING: Do not use a vacuum

extractor without proper spark

protection when sawing metal..

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D 23550 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info