Bedienungsanleitung DeWalt d 23651 (Seite 37 von 160) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

383784

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

ENGLISH

is ineffective in preventing kickback during

short cuts.

d) Do not operate the saw if riving knife is

bent. Even a light interference can slow the

closing rate of a guard.

Additional Safety Warnings for

Circular Saw

• Wear ear protectors. Exposure to noise can

cause hearing loss.

• Wear a dust mask. Exposure to dust particles

can cause breathing difficulty and possible

injury.

• Do not use blades of larger or smaller

diameter than recommended. For the proper

blade rating refer to the technical data. Use only

the blades specified in this manual, complying

with EN 847-1.

• Never use abrasive cut-off wheels.

• Ensure that the riving knife is adjusted so that

the distance between the riving knive and the

rim of the blade is not more than 5 mm, and

the rim of the blade does not extend more than

5 mm beyond the lowest edge of the riving

knife.

Residual Risks

The following risks are inherent to the use of circular

saws.

– Injuries caused by touching the rotating parts or

hot part of the tool.

In spite of the application of the relevant safety

regulations and the implementation of safety

devices, certain residual risks cannot be avoided.

These are:

– Impairment of hearing .

– Risk of squeezing fingers when changing the

accessory.

– Health hazards caused by breathing dust

developed when working in wood.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual before use.

DATE CODE POSITION (FIG. 1)

The Date Code (ee), which also includes the year of

manufacture, is printed into the housing.

Example:

2010 XX XX

Year of Manufacture

Package Contents

The package contains:

1 Circular saw

1 Parallel fence

1 Hex wrench

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and

understand this manual prior to operation.

Description (ﬁ g. 1, 4, 5)

WARNING: Never modify the power

tool or any part of it. Damage or

personal injury could result.

a. Trigger switch

b. Lock-off button

c. Front handle

d. Spindle lock

e. Dust extraction outlet

f. Saw shoe

g. Riving knife

h. Lower guard retracting lever

i. Lower guard

j. Saw blade

k. Bevel adjustment knob

l. Fence adjustment knob (D23651)

m. Rail adjuster: cutting

n. Rail adjuster: bevel

o. Mark for bevel cut

p. Mark for straight cut

q. Depth adjustment knob

r. Parallel fence

INTENDED USE

The D23551 and D23651 circular saws have been

designed for professional sawing of wood and

plastic. Abrasive cutting wheels are available for

cutting metal and stone.

DO NOT use under wet conditions or in presence of

flammable liquids or gases.

These circular saws are professional power tools.

DO NOT let children come into contact with the

tool. Supervision is required when inexperienced

operators use this tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt d 23651 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info