Bedienungsanleitung DeWalt D 25113 (Seite 31 von 148) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

78764

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

ENGLISH

Wear ear protection.

Wear eye protection.

DATE CODE POSITION (FIG. 1)

The Date Code (n), which also includes the year of

manufacture, is printed into the housing.

Example:

2009 XX XX

Year of Manufacture

Package Contents

The package contains:

1 Heavy-duty rotary hammerdrill

1 Side handle

1 Depth adjustment rod

1 Kitbox

1 Keyless chuck (D25114K)

1 Keyed chuck + chuck adaptor (D25112CK)

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and

understand this manual prior to operation.

Description (ﬁ g. 1)

WARNING: Never modify the power

tool or any part of it. Damage or

personal injury could result.

a. Variable speed switch

b. Lock-on button

(D25112(C)/D25113/D25114)

c. Forward/reverse slider

d. Mode selector

e. Safety lock

f. Tool holder

g. Dust cover

h. Locking collar (D25114)

i. Depth adjustment rod

j. Side handle

k. Depth stop clamp

INTENDED USE

These heavy-duty rotary hammers have been

designed for professional drilling and hammerdrilling,

screwdriving and light chipping

DO NOT use under wet conditions or in presence of

flammable liquids or gases.

These hammerdrills are professional power tools.

DO NOT let children come into contact with the

tool. Supervision is required when inexperienced

operators use this tool.

Torque Limiting Clutch

All rotary hammerdrills are equipped with a torque

limiting clutch that reduces the maximum torque

reaction transmitted to the operator in case of

jamming of a drill bit. This feature also prevents the

gearing and electric motor from stalling. The torque

limiting clutch has been factory-set and cannot be

adjusted.

Electrical Safety

The electric motor has been designed for one

voltage only. Always check that the power supply

corresponds to the voltage on the rating plate.

Your DEWALT charger is double insulated

in accordance with EN 60745; therefore

no earth wire is required.

WARNING: 115 V units have to

be operated via a fail-safe isolating

transformer with an earth screen

between the primary and secondary

winding.

If the supply cord is damaged, it must be replaced

by a specially prepared cord available through the

DEWALT service organization.

Mains Plug Replacement

(U.K. & Ireland Only)

If a new mains plug needs to be fitted:

• Safely dispose of the old plug.

• Connect the brown lead to the live terminal in

the plug.

• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be

made to the earth terminal.

Follow the fitting instructions supplied with good

quality plugs. Recommended fuse: 3 A.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D 25113 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt D 25113

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info