Bedienungsanleitung DeWalt D 25304 (Seite 22 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

78626

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENGLISH

Safety instructions

When using power tools, always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and

personal injury.

Read all of this manual carefully before operating

the tool.

Save this manual for future reference.

General

1 Keep work area clean

Cluttered areas and benches can cause accidents.

2 Consider work area environment

Do not expose the tool to rain. Do not use the

tool in damp or wet conditions. Keep the work

area well lit (250 - 300 Lux). Do not use the tool

where there is a risk of causing fire or explosion,

e.g. in the presence of flammable liquids and

gases.

3 Keep children away

Do not allow children, visitors or animals to come

near the work area or to touch the tool or the

mains cable.

4 Dress properly

Do not wear loose clothing or jewellery, as these

can be caught in moving parts. Wear protective

hair covering to keep long hair out of the way.

When working outdoors, preferably wear suitable

gloves and non-slip footwear.

5 Personal protection

Always use safety glasses. Use a face or dust

mask whenever the operations may produce

dust or flying particles. If these particles might be

considerably hot, also wear a heat-resistant

apron. Wear ear protection at all times.

6 Guard against electric shock

Prevent body contact with earthed surfaces

(e.g. pipes, radiators, cookers and refrigerators).

When using the tool under extreme conditions

(e.g. high humidity, when metal swarf is being

produced, etc.), electric safety can be improved

by inserting an isolating transformer or a (FI)

earth-leakage circuit-breaker.

7 Do not overreach

Keep proper footing and balance at all times.

8 Stay alert

Watch what you are doing. Use common sense.

Do not operate the tool when you are tired.

9 Secure workpiece

Use clamps or a vice to hold the workpiece. It is

safer and it frees both hands to operate the tool.

10 Connect dust extraction equipment

If devices are provided for the connection of dust

extraction and collection facilities, ensure that

these are connected and properly used.

11 Remove adjusting keys and wrenches

Always check that adjusting keys and wrenches

are removed from the tool before operating the

tool.

12 Extension cables

Before use, inspect the extension cable and

replace if damaged. When using the tool

outdoors, only use extension cables intended for

outdoor use and marked accordingly.

13 Use appropriate tool

The intended use is described in this instruction

manual. Do not force small tools or attachments

to do the job of a heavy-duty tool. The tool will

do the job better and safer at the rate for which it

was intended. Do not force the tool.

Warning! The use of any accessory or

attachment or performance of any operation with

this tool other than those recommended in this

instruction manual may present a risk of personal

injury.

14 Check for damaged parts

Before use, carefully check the tool and mains

cable for damage. Check for misalignment and

seizure of moving parts, breakage of parts, damage

to guards and switches and any other conditions

that may affect its operation. Ensure that the tool

will operate properly and perform its intended

function. Do not use the tool if any part is damaged

or defective. Do not use the tool if the switch

does not turn it on and off. Have any damaged or

defective parts replaced by an authorised DEWALT

repair agent. Never attempt any repairs yourself.

15 Unplug tool

Switch off and wait for the tool to come to a

complete standstill before leaving it unattended.

Unplug the tool when not in use, before changing

any parts of the tools, accessories or

attachments and before servicing.

16 Avoid unintentional starting

Do not carry the tool with a finger on the switch.

Be sure that the tool is switched off before

plugging in.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D 25304 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info