Bedienungsanleitung DeWalt d 25313 k (Seite 27 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

388889

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

E N G L I S H

- Risk of squeezing ﬁngers when changing the

accessory.

- Health hazards caused by breathing dust

developed when working in concrete and/or

masonry.

Package contents

The package contains:

1 Heavy duty rotary hammer drill

1 Side handle

1 Depth adjustment rod

1 Kitbox

1 Keyless chuck (D25314K)

1 Instruction manual

1 Exploded drawing

● Check for damage to the tool, parts or

accessories which may have occurred during

transport.

● Take the time to thoroughly read and

understand this manual prior to operation.

Description (ﬁg. A)

Your D25313K/D25314K rotary hammer has been

designed for professional hammer drilling and light

chipping, chiselling and demolition applications and

for carbide tipped core drilling in concrete, brick

and stone. The machine is also suitable for rotary

drilling in wood, metal, ceramic and plastic and for

screw driving and thread cutting.

1 Variable speed switch

2 Forward/reverse slider

3 Mode selector

4 Safety lock

5 Tool holder

6 Dust cover

7 Locking collar (D25314K)

8 Depth adjustment rod

9 Side handle

10 Depth stop clamp

Torque limiting clutch

All rotary hammer drills are equipped with a torque

limiting clutch that reduces the maximum torque

reaction transmitted to the operator in case of

jamming of a drill bit. This feature also prevents the

gearing and electric motor from stalling.

The torque limiting clutch has been factory-set and

cannot be adjusted.

Electrical safety

The electric motor has been designed for one

voltage only. Always check that the power supply

corresponds to the voltage on the rating plate.

Your DEWALT tool is double insulated in

accordance with EN 60745-1; therefore

no earth wire is required.

115 V units have to be operated via a

failsafe isolating transformer with an

earth screen between the primary and

secondary winding.

Mains plug replacement

(U.K. & Ireland only)

● Should your mains plug need replacing and you

are competent to do this, proceed as instructed

below. If you are in doubt, contact an authorized

DEWALT repair agent or a qualiﬁed electrician.

● Disconnect the plug from the supply.

● Cut off the plug and dispose of it safely; a plug

with bared copper conductors is dangerous if

engaged in a live socket outlet.

● Only ﬁt 13 Amperes BS1363A approved plugs

ﬁtted with the correctly rated fuse (1).

● The cable wire colours, or a letter, will be

marked at the connection points of most good

quality plugs. Attach the wires to their

respective points in the plug (see below). Brown

is for Live (L) (2) and Blue is for Neutral (N) (4).

● Before replacing the top cover of the mains plug

ensure that the cable restraint (3) is holding the

outer sheath of the cable ﬁrmly and that the two

leads are correctly ﬁxed at the terminal screws.

Never use a light socket.

Never connect the live (L) or neutral (N)

wires to the earth pin marked E or .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt d 25313 k Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info