Bedienungsanleitung DeWalt D 25900 (Seite 26 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

78352

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENGLISH

Setting the electronic impact power control dial

(fig. A)

• Turn the dial (3) to the desired level.

The higher the number, the greater the impact

energy. With dial settings from «1» (low) to «7»

(full power) the tool is extremely versatile and

adaptable for many different applications.

The required setting is a matter of experience. E.g.:

- when chiselling soft, brittle materials or when

minimum break-out is required, set the dial to «1»

or «2» (low);

- when breaking harder materials, set the dial to

«7» (full power).

Fitting and adjusting the side handle (fig. D)

The side handle (4) can be mounted on the front of

the machine to suit both RH- and LH-users.

Always operate the machine with the

side handle properly mounted.

• Unscrew the side handle clamp knob (7).

• Slide the side handle assembly onto the machine

locating the steel ring (8) in the mounting area (X).

• Adjust the side handle (4) to the desired angle.

• Slide and rotate the side handle to the desired

position.

• Lock the side handle in place by tightening the

clamp knob (7).

Instructions for use

• Always observe the safety instructions

and applicable regulations.

• Be aware of the location of pipework and

wiring.

• Apply a pressure of approx. 20 - 30 kg

to the tool. Excessive force does not

speed up chiselling but decreases tool

performance and may shorten tool life.

Switching on and off (fig. A)

• Switching on: set the on/off switch (1) to position 1.

• Switching off: set the on/off switch (1) to position 0.

Demolition, chasing and channelling (fig. A)

• Select the appropriate chisel, and clean and

grease its shank.

• Insert the chisel and check whether it is properly

locked.

• Set the desired impact energy level.

• Fit and adjust the side handle (4) and make sure

it is firmly tightened.

• Hold the tool at both handles (2 & 4) and switch

on. The tool now runs in continuous operation.

• Always switch off the tool when work is finished

and before unplugging.

Various types of SDS-max

chisels are available as

an option.

Consult your dealer for further information on the

appropriate accessories.

Maintenance

Your DEWALT Power Tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

• This machine is not user-serviceable. Take the

tool to an authorised DEWALT repair agent after

approximately 100 hours of use. If problems

occur before this time contact an authorised

DEWALT repair agent.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

Keep the ventilation slots clear and regularly clean

the housing with a soft cloth.

Accessory maintenance

Accessory maintenance at the right time guarantees

optimal results in application and a long and efficient

accessory life.

Unwanted tools and the environment

Take your tool to an authorized DEWALT repair

agent where it will be disposed of in an

environmentally safe way.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D 25900 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info