Bedienungsanleitung DeWalt d 25940 k (Seite 22 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

388804

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

ENGLISH

Check for misalignment and seizure of moving

parts, breakage of parts and any other conditions

that may affect its operation. Have damaged

guards or other defective parts repaired or

replaced as instructed.

Do not use the tool if the switch is defective.

Have the switch replaced by an authorized

DEWALT repair agent.

20 Have your tool repaired by an authorized

DEWALT repair agent

This Power Tool is in accordance with the

relevant safety regulations. To avoid danger,

electric appliances must only be repaired by

qualified technicians.

Additional safety instructions for demolition

hammers

• Ensure the chisel is secured in place before

operating the tool.

• In cold-weather conditions or when the tool has

not been used for a longer period of time, let the

tool run with no load for several minutes before use.

• Always hold the tool firmly with both hands and

ensure a secure stance. Always operate the tool

with the side handle properly mounted.

• When working above ground level ensure the

area below is clear.

• To prevent electric shock, check the working

area for live wires before operation.

• Do not touch the chisel or the parts close to the

chisel immediately after operation, as they may

be extremely hot and cause burns to the skin.

• Always direct the power cable to the rear, away

from the chisel.

Package contents

The package contains:

1 Demolition hammer

1 Side handle

1 Pointed chisel

1 Plastic case

1 Tube of chisel lubricant

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or accessories

which may have occurred during transport.

• Take the time to thoroughly read and understand

this manual prior to operation.

Description (fig. A)

Your D25940K demolition hammer has been

designed for professional heavy duty demolition,

chipping and chasing applications in concrete, brick,

stone and other masonry materials.

1 On/off switch

2 Rear handle

3 Side handle

4 Chisel position index collar

5 Tool holder

Soft start feature

The soft start feature allows the impact rate to build

up more slowly, thus preventing the chisel or point

from “bouncing” around on the masonry when

starting up.

Active vibration control

The active vibration control neutralises rebound

vibration from the hammer mechanism. Lowering

hand and arm vibration, it allows more comfortable

use for longer periods of time and extends the life of

the unit.

Electrical safety

The electric motor has been designed for a limited

voltage range. Always check that the power supply

falls within the voltage range on the rating plate.

Your DEWALT tool is double insulated in

accordance with EN 50144; therefore no

earth wire is required.

Mains plug replacement

(U.K. & Ireland only)

• Should your mains plug need replacing and you

are competent to do this, proceed as instructed

below. If you are in doubt, contact an authorized

DEWALT repair agent or a qualified electrician.

• Disconnect the plug from the supply.

• Cut off the plug and dispose of it safely; a plug

with bared copper conductors is dangerous if

engaged in a live socket outlet.

• Only fit 13 Amperes BS1363A approved plugs

fitted with the correctly rated fuse (1).

• The cable wire colours, or a letter, will be marked

at the connection points of most good quality

plugs. Attach the wires to their respective points

in the plug (see below).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt d 25940 k Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info