Bedienungsanleitung DeWalt D 26453 (Seite 26 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

78282

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

ENGLISH

3. Hold the sanding pad (d) with one hand and

align the dust extraction holes (e).

4. Press the disc firmly onto the sanding pad.

Setting the Electronic Speed Control

Dial (ﬁ g. 1)

The speed is infinitely variable from 7,000–12,000

min

-1

using the electronic speed control dial (b).

Turn the electronic speed control dial to the required

level. The correct setting, however, is a matter of

experience.

Generally, harder materials require a higher setting.

Dust Extraction (ﬁ g. 3)

WARNING: Since woodworking with a

sander produces dust, always install a

dustbag designed in compliance with

the applicable directives regarding dust

emission.

WARNING: Do not use a dustbag or

vacuum extractor without proper spark

protection when sanding metal.

The tool is supplied with an adapter for connecting a

dustbag or a vacuum extractor.

1. Fit the dust extraction adaptor (f) onto the outlet

2. Attach the dustbag (g) by aligning the

openended slots (h) with the notches (i) and

fitting the bag onto the adaptor (f).

3. Turn the assembly clockwise to lock it in

position.

4. Alternatively, connect the tool to a vacuum

extractor using the adaptor (f).

OPERATION

Instructions for Use

WARNING: Always observe the safety

instructions and applicable regulations.

WARNING: To reduce the risk

of serious personal injury, turn

tool off and disconnect tool from

power source before making any

adjustments or removing/installing

attachments or accessories.

WARNING:

• Make sure all materials to be sanded

are well secured.

• Apply only a gentle pressure to the

workpiece. Excessive pressure does

not improve the sanding effect, but

only results in an increased load on

the machine and causes the abrasive

to tear.

• Avoid overloading.

WARNING: Do not sand magnesium!

Proper Hand Position (ﬁ g. 5)

WARNING: To reduce the risk of

serious personal injury, ALWAYS use

proper hand position as shown.

WARNING: To reduce the risk of

serious personal injury, ALWAYS hold

securely in anticipation of a sudden

reaction.

Proper hand position requires one hand on the main

grip (l) as shown.

Switching On and Off (ﬁ g. 1)

Set the sanding speed using the electronic speed

control dial (b).

To switch the tool on, set the on/off switch to

position I.

To switch the tool off, set the on/off switch to

position O.

Sanding (ﬁ g. 1)

Start with the coarsest grit size.

As the tool produces small abrasion marks in all

directions, it is not necessary to sand with the grain.

Check your work at short intervals.

Always switch off the tool when work is finished and

before unplugging.

Emptying the Dustbag (ﬁ g. 3)

For efficient dust extraction empty the dust collector

when it is about one third full.

1. To empty the dust collector, pull it off together

with the adaptor.

2. Remove the dustbag (g) from the adaptor (f) by

turning it counter-clockwise and pulling it off.

3. Empty the contents of the bag into a waste

container. If necessary, use a vacuum extractor

to clean the dustbag, applying suction to the

interior surface.

4. Re-fit the dust extraction adaptor.

5. Re-fit the dustbag.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D 26453 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info